[Mon May 20 17:25:51 2013] Detection parameters:
  Position = (281.8, 266.1) = 12 1 55.90 -18 52 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2253.1 +/- 60.9
  Background counts = 121.5
  Rate = 0.09 +/- 0.002

[Mon May 20 17:25:52 2013] Off-axis axis estimate = 2.64'
[Mon May 20 17:28:52 2013] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Mon May 20 17:28:52 2013] Initial guess for spatial extent in simple fitting = 7.75"
[Mon May 20 17:28:52 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.769
[Mon May 20 17:28:52 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.75"
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src2.ximg exists
[Mon May 20 18:26:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src2.csv
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon May 20 18:26:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src2.csv
[Mon May 20 18:26:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon May 20 18:26:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon May 20 18:26:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon May 20 18:26:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 20:46:23 2013] Spatial fit model total counts = 4917.750000, observed total counts = 4395.000000
[Mon May 20 20:46:23 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 20:46:23 2013] Spatial fit model total counts = 6149.930000, observed total counts = 5430.000000
[Mon May 20 20:46:23 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 20:46:23 2013] Vigneting correction estimate = 1.000000
[Mon May 20 20:46:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 20:46:23 2013] Assessing source extent using major
[Mon May 20 20:46:23 2013] Source does appear to be extended
[Mon May 20 20:46:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 20:46:23 2013] Source is confused with source 3
[Mon May 20 20:46:46 2013] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Mon May 20 20:46:46 2013] Initial guess for spatial extent in simple fitting = 7.75"
[Mon May 20 20:46:46 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.769
[Mon May 20 20:46:46 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.75"
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src2.ximg exists
[Mon May 20 21:34:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src2.csv
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon May 20 21:34:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src2.csv
[Mon May 20 21:34:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon May 20 21:34:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon May 20 21:34:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon May 20 21:34:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:01:22 2013] Warning, spatial fit 2 centroid is now closest to src. 22
[Tue May 21 00:01:22 2013] Spatial fit model total counts = 6075.250000, observed total counts = 5430.000000
[Tue May 21 00:01:22 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 00:01:22 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:01:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:01:22 2013] Assessing source extent using major
[Tue May 21 00:01:22 2013] Source does appear to be extended
[Tue May 21 00:01:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:01:58 2013] Counts = 2253.084229, rescaling region sizes by 2.000000
[Tue May 21 00:01:58 2013] XMMSAS src. selection expression = ellipse(24470.265442, 23099.171143, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May 21 00:01:58 2013] Writing source region out to fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src2_src.reg
[Tue May 21 00:01:58 2013] Extracting stamp from image fullrun_pn_xmm0500070701_pi300-10000_cl_sm2.00.img.gz, (207, 191) - (357, 341)
[Tue May 21 00:01:58 2013] XMMSAS bgd. selection expression = annulus(24470.265442, 23099.171143, 4350.000000, 8700.000000, X, Y) && !ellipse(24964.414800, 21979.078000, 989.960028, 731.060021, 2.630180, X, Y) && !ellipse(24998.196777, 23347.711090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25480.192400, 23901.044400, 405.679212, 405.679212, 0.000000, X, Y) && !ellipse(27071.066800, 17724.008400, 489.008814, 350.880010, 342.318500, X, Y) && !ellipse(27905.913177, 27011.263885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15042.625458, 30576.885925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25791.745209, 30312.880432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28530.118530, 28805.941559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30263.143768, 28339.758240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22275.535919, 27343.046967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26430.675354, 26879.478851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24590.400540, 26596.042800, 490.675214, 490.675214, 0.000000, X, Y) && !ellipse(31537.469200, 26145.692000, 1041.056030, 431.672812, 354.631703, X, Y) && !ellipse(26094.973200, 25893.832800, 328.980009, 328.980009, 0.000000, X, Y) && !ellipse(18395.315475, 22218.167374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25805.320374, 22631.654999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23820.258514, 21684.988373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26356.000000, 21032.562714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24109.083221, 21025.026413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25938.770111, 20316.195984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26160.531000, 18770.736800, 476.738414, 397.116811, 359.822602, X, Y) && !ellipse(16605.384995, 16989.277008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30476.446167, 16939.892136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25178.082500, 15201.358400, 390.584011, 390.584011, 0.000000, X, Y) && !ellipse(19174.597200, 14418.394600, 450.499213, 450.499213, 0.000000, X, Y)
[Tue May 21 00:01:58 2013] Writing fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src2.gif
[Tue May 21 00:07:09 2013] Mean detx,y = (1201.55, -699.03) 
[Tue May 21 00:07:19 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 00:09:52 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 00:09:52 2013] Setting source spectrum file to fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue May 21 00:09:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue May 21 00:45:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 21 00:45:07 2013] rmf not generated due to insufficient counts
[Tue May 21 04:57:41 2013] Updating aperture counts using extracted products
[Tue May 21 04:57:41 2013] Total counts from fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 9235.00
[Tue May 21 04:57:41 2013] Total counts from fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src2_bgd.pi.gz = 24883.00
[Tue May 21 04:57:41 2013] Got source and background scale factors 4718260.000000, 140787014.000000
[Tue May 21 04:57:41 2013] User source parameters:
  Position = (281.8, 266.1) = 12 1 55.90 -18 52 14.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 8401.1 +/- 97.1
  Background aperture counts = 833.9
  Rate = 0.4 +/- 0.004

[Tue May 21 04:57:41 2013] Updating counts from extracted products
[Tue May 21 04:57:41 2013] Set source signif. to 8401.08/28.88 = 290.92
[Tue May 21 04:57:52 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 04:57:52 2013] Using photon index=1.80, rate=0.362, arf fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src2.arf
[Tue May 21 04:57:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 04:57:52 2013] Updating source flux to 8.8e-13
[Tue May 21 04:58:32 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 04:58:44 2013] xmm0500070701/analysis//spectral/fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete