[Mon May 20 17:25:51 2013] Detection parameters:
  Position = (287.9, 253.1) = 12 1 54.03 -18 53 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2822.5 +/- 66.4
  Background counts = 117.2
  Rate = 0.1 +/- 0.003

[Mon May 20 17:25:52 2013] Off-axis axis estimate = 3.37'
[Mon May 20 17:28:52 2013] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Mon May 20 17:28:52 2013] Initial guess for spatial extent in simple fitting = 8.12"
[Mon May 20 17:28:52 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.715
[Mon May 20 17:28:52 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.12"
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 20 18:26:19 2013] Fit fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 20 18:26:19 2013] Fit fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 20 20:46:23 2013] Spatial fit model total counts = 4211.810000, observed total counts = 3913.000000
[Mon May 20 20:46:23 2013] Offset between fit and detection position for source 1 = 0.443660 pixels
[Mon May 20 20:46:23 2013] 4261.690000 total counts/ 1959.780000 bgd. counts: snr = 51.997765
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.443660 pixels
  Position = (287.5, 253.2) = 12 1 54.16 -18 53 10.4
  Extent = 12.4 (11.5-13.1)" x 9.1 (8.4-9.8)", rotation angle = 3 (356-10) degrees
  Source counts = 2301.9 +/- 65.3
  Background counts = 1959.8
  Rate = 0.1 +/- 0.003
[Mon May 20 20:46:23 2013] Vigneting correction estimate = 1.000000
[Mon May 20 20:46:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 20:46:23 2013] Assessing source extent using major axis lower bound
[Mon May 20 20:46:23 2013] Source does appear to be extended
[Mon May 20 20:46:23 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.18
[Mon May 20 20:46:46 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 20:46:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 20 20:46:46 2013] Initial guess for spatial extent in simple fitting = 10.76"
[Mon May 20 20:46:46 2013] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.849
[Mon May 20 20:46:46 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.76"
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 20 21:34:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src1.csv
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 20 21:34:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src1.csv
[Mon May 20 21:34:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 20 21:34:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 20 21:34:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 20 21:34:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:01:22 2013] Warning, spatial fit 1 centroid is now closest to src. 25
[Tue May 21 00:01:22 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:01:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:01:22 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:01:22 2013] Source does appear to be extended
[Tue May 21 00:01:22 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.18
[Tue May 21 00:01:58 2013] Counts = 2301.910000, rescaling region sizes by 2.000000
[Tue May 21 00:01:58 2013] XMMSAS src. selection expression = ellipse(24964.414800, 21979.078000, 1484.940043, 1096.590032, 2.630180, X, Y)
[Tue May 21 00:01:58 2013] Writing source region out to fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src1_src.reg
[Tue May 21 00:01:58 2013] Extracting stamp from image fullrun_pn_xmm0500070701_pi300-10000_cl_sm2.00.img.gz, (202, 168) - (373, 339)
[Tue May 21 00:01:58 2013] XMMSAS bgd. selection expression = annulus(24964.414800, 21979.078000, 4949.800142, 9899.600285, X, Y) && !ellipse(24470.265442, 23099.171143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24998.196777, 23347.711090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25480.192400, 23901.044400, 405.679212, 405.679212, 0.000000, X, Y) && !ellipse(27071.066800, 17724.008400, 489.008814, 350.880010, 342.318500, X, Y) && !ellipse(27905.913177, 27011.263885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15042.625458, 30576.885925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25791.745209, 30312.880432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28530.118530, 28805.941559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30263.143768, 28339.758240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34690.598938, 27284.692078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22275.535919, 27343.046967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26430.675354, 26879.478851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24590.400540, 26596.042800, 490.675214, 490.675214, 0.000000, X, Y) && !ellipse(31537.469200, 26145.692000, 1041.056030, 431.672812, 354.631703, X, Y) && !ellipse(26094.973200, 25893.832800, 328.980009, 328.980009, 0.000000, X, Y) && !ellipse(18395.315475, 22218.167374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25805.320374, 22631.654999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23820.258514, 21684.988373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26356.000000, 21032.562714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24109.083221, 21025.026413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25938.770111, 20316.195984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26160.531000, 18770.736800, 476.738414, 397.116811, 359.822602, X, Y) && !ellipse(16605.384995, 16989.277008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30476.446167, 16939.892136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25178.082500, 15201.358400, 390.584011, 390.584011, 0.000000, X, Y) && !ellipse(19174.597200, 14418.394600, 450.499213, 450.499213, 0.000000, X, Y) && !ellipse(19725.491791, 13166.591049, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 21 00:01:58 2013] Writing fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src1.gif
[Tue May 21 00:02:28 2013] Mean detx,y = (1372.18, -1601.14) 
[Tue May 21 00:02:38 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 00:06:30 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 00:06:31 2013] Setting source spectrum file to fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 21 00:06:31 2013] Setting bgd. spectrum file to fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 21 04:57:41 2013] Updating aperture counts using extracted products
[Tue May 21 04:57:41 2013] Total counts from fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 6349.00
[Tue May 21 04:57:41 2013] Total counts from fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src1_bgd.pi.gz = 31659.00
[Tue May 21 04:57:41 2013] Got source and background scale factors 4156224.000000, 184612830.000000
[Tue May 21 04:57:41 2013] User source parameters:
  Position = (287.5, 253.2) = 12 1 54.16 -18 53 10.4
  Extent = 12.4 (11.5-13.1)" x 9.1 (8.4-9.8)", rotation angle = 3 (356-10) degrees
  Source aperture counts = 5636.3 +/- 80.7
  Background aperture counts = 712.7
  Rate = 0.2 +/- 0.003

[Tue May 21 04:57:52 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 04:57:52 2013] Using photon index=1.80, rate=0.0991, arf fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src1.arf
[Tue May 21 04:57:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 04:57:52 2013] Updating source flux to 2.7e-13
[Tue May 21 04:58:44 2013] xmm0500070701/analysis//spectral/fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete