[Mon May 20 17:26:46 2013] Detection parameters:
  Position = (319.7, 195.5) = 12 1 44.28 -18 57 15.4
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 28.4 +/- 8.6
  Background counts = 59.5
  Rate = 0.002 +/- 0.0005

[Mon May 20 17:26:47 2013] Off-axis axis estimate = 7.62'
[Mon May 20 19:34:01 2013] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Mon May 20 19:34:01 2013] Initial guess for spatial extent in simple fitting = 10.24"
[Mon May 20 19:34:01 2013] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.767
[Mon May 20 19:34:01 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 10.24"
[Mon May 20 20:46:16 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src33.ximg exists
[Mon May 20 20:46:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src33.csv
[Mon May 20 20:46:16 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon May 20 20:46:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src33.csv
[Mon May 20 20:46:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 20:46:17 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon May 20 20:46:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src33.csv
[Mon May 20 20:46:17 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon May 20 20:46:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src33.csv
[Mon May 20 20:46:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 20:46:36 2013] Spatial fit model total counts = 278.479000, observed total counts = 232.000000
[Mon May 20 20:46:36 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 20:46:36 2013] Vigneting correction estimate = 1.000000
[Mon May 20 20:46:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 20:46:36 2013] Assessing source extent using major
[Mon May 20 20:46:36 2013] Source does appear to be extended
[Mon May 20 20:46:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 20:46:36 2013] Deleting source due to low Poisson probability 0.9