[Mon May 20 17:26:46 2013] Detection parameters:
  Position = (296.2, 264.1) = 12 1 51.48 -18 52 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 464.6 +/- 26.6
  Background counts = 17.5
  Rate = 0.02 +/- 0.0009

[Mon May 20 17:26:47 2013] Off-axis axis estimate = 2.50'
[Mon May 20 19:34:01 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Mon May 20 19:34:01 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Mon May 20 19:34:01 2013] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.926
[Mon May 20 19:34:01 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.68"
[Mon May 20 20:46:16 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src4.ximg exists
[Mon May 20 20:46:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src4.csv
[Mon May 20 20:46:16 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon May 20 20:46:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src4.csv
[Mon May 20 20:46:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 20:46:16 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon May 20 20:46:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 20 20:46:16 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May 20 20:46:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 20 20:46:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 20:46:36 2013] Spatial fit model total counts = 1471.070000, observed total counts = 1335.000000
[Mon May 20 20:46:36 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 20:46:36 2013] Spatial fit model total counts = 2193.850000, observed total counts = 1931.000000
[Mon May 20 20:46:36 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 20:46:36 2013] Vigneting correction estimate = 1.000000
[Mon May 20 20:46:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 20:46:36 2013] Assessing source extent using major
[Mon May 20 20:46:36 2013] Source does appear to be extended
[Mon May 20 20:46:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 20:46:36 2013] Source is confused with source 20
[Mon May 20 22:37:10 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Mon May 20 22:37:10 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Mon May 20 22:37:10 2013] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.926
[Mon May 20 22:37:10 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.68"
[Tue May 21 00:01:10 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass1_src4.ximg exists
[Tue May 21 00:01:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070701_pi300-10000_cl_pass1_src4.csv
[Tue May 21 00:01:10 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue May 21 00:01:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070701_pi300-10000_cl_pass1_src4.csv
[Tue May 21 00:01:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070701_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070701_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:01:11 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue May 21 00:01:11 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue May 21 00:01:11 2013] Fit fullrun_mos2_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue May 21 00:01:41 2013] Spatial fit model total counts = 1465.520000, observed total counts = 1335.000000
[Tue May 21 00:01:41 2013] Offset between fit and detection position for source 3 = 0.574794 pixels
[Tue May 21 00:01:41 2013] 1449.340000 total counts/ 1210.210000 bgd. counts: snr = 6.873908
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.574794 pixels
  Position = (296.8, 264.0) = 12 1 51.31 -18 52 23.5
  Extent = 7.2 (5.9-8.6)", rotation angle = 0
  Source counts = 239.1 +/- 38.1
  Background counts = 1210.2
  Rate = 0.008 +/- 0.001
[Tue May 21 00:01:41 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:01:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:01:41 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:01:41 2013] Source does appear to be extended
[Tue May 21 00:01:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 04:13:31 2013] XMMSAS src. selection expression = ellipse(25774.055800, 22918.159000, 433.057212, 433.057212, 0.000000, X, Y)
[Tue May 21 04:13:31 2013] Writing source region out to fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src3_src.reg
[Tue May 21 04:13:31 2013] Extracting stamp from image fullrun_mos2_xmm0500070701_pi300-10000_cl_sm2.00.img.gz, (272, 239) - (322, 289)
[Tue May 21 04:13:31 2013] XMMSAS bgd. selection expression = annulus(25774.055800, 22918.159000, 721.762021, 1443.524042, X, Y) && !ellipse(24954.547000, 21978.808600, 983.632028, 743.914421, 6.415620, X, Y) && !ellipse(24396.417000, 23186.249680, 1023.152029, 615.834418, 65.045400, X, Y) && !ellipse(25498.034600, 23908.125200, 351.354410, 351.354410, 0.000000, X, Y) && !ellipse(25399.005310, 23287.625122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25631.968201, 21199.011810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23758.956543, 22053.113495, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 21 04:13:31 2013] Writing fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src3.gif
[Tue May 21 04:14:49 2013] Mean detx,y = (-134.46, 1025.29) 
[Tue May 21 04:14:51 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 04:15:03 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 04:15:04 2013] Setting source spectrum file to fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 21 04:15:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue May 21 04:58:05 2013] Updating aperture counts using extracted products
[Tue May 21 04:58:05 2013] Total counts from fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 566.00
[Tue May 21 04:58:05 2013] Total counts from fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src3_bgd.pi.gz = 350.00
[Tue May 21 04:58:05 2013] Got source and background scale factors 561320.000000, 2140800.000000
[Tue May 21 04:58:05 2013] User source parameters:
  Position = (296.8, 264.0) = 12 1 51.31 -18 52 23.5
  Extent = 7.2 (5.9-8.6)", rotation angle = 0
  Source aperture counts = 474.2 +/- 24.8
  Background aperture counts = 91.8
  Rate = 0.02 +/- 0.0008

[Tue May 21 04:58:13 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 04:58:13 2013] Using photon index=1.80, rate=0.00758, arf fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src3.arf
[Tue May 21 04:58:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 04:58:13 2013] Updating source flux to 8.4e-14
[Tue May 21 04:58:24 2013] Flag p found in src. 3 procflags, skipping spectral fitting
[Tue May 21 04:58:24 2013] Flag c found in src. 3 procflags, skipping spectral fitting
[Tue May 21 04:58:32 2013] xmm0500070701/analysis//spectral/fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete