[Mon May 20 17:26:46 2013] Detection parameters:
  Position = (292.5, 268.2) = 12 1 52.63 -18 52 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 248.9 +/- 21.3
  Background counts = 17.5
  Rate = 0.009 +/- 0.0008

[Mon May 20 17:26:47 2013] Off-axis axis estimate = 2.23'
[Mon May 20 19:34:01 2013] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Mon May 20 19:34:01 2013] Initial guess for spatial extent in simple fitting = 7.54"
[Mon May 20 19:34:01 2013] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.501
[Mon May 20 19:34:01 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.54"
[Mon May 20 20:46:16 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src6.ximg exists
[Mon May 20 20:46:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src6.csv
[Mon May 20 20:46:16 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon May 20 20:46:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src6.csv
[Mon May 20 20:46:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 20:46:16 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon May 20 20:46:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon May 20 20:46:16 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon May 20 20:46:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon May 20 20:46:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 20:46:36 2013] Warning, spatial fit 6 centroid is now closest to src. 3
[Mon May 20 20:46:36 2013] Vigneting correction estimate = 1.000000
[Mon May 20 20:46:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 20:46:36 2013] Assessing source extent using major
[Mon May 20 20:46:36 2013] Source does appear to be extended
[Mon May 20 20:46:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 20:46:36 2013] Source is confused with source 4
[Mon May 20 22:37:10 2013] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Mon May 20 22:37:10 2013] Initial guess for spatial extent in simple fitting = 7.54"
[Mon May 20 22:37:10 2013] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.501
[Mon May 20 22:37:10 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 7.54"
[Tue May 21 00:01:10 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass1_src6.ximg exists
[Tue May 21 00:01:10 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue May 21 00:01:10 2013] Fit fullrun_mos2_xmm0500070701_pi300-10000_cl_pass1_src6 appears to have run properly
[Tue May 21 00:01:11 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue May 21 00:01:11 2013] fullrun_mos2_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue May 21 00:01:11 2013] Fit fullrun_mos2_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue May 21 00:01:41 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 22.848389 pixels away
[Tue May 21 00:01:41 2013] Source 20 is offset by -1.097183 and -7.631803 pixels which is larger than
2 X fitted extent = 1.901393 x 2.762028, not incorporating fit results
[Tue May 21 00:01:41 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:01:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:01:41 2013] Assessing source extent using major
[Tue May 21 00:01:41 2013] Source does appear to be extended
[Tue May 21 00:01:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 04:13:31 2013] XMMSAS src. selection expression = ellipse(25399.005310, 23287.625122, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 21 04:13:31 2013] Writing source region out to fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src20_src.reg
[Tue May 21 04:13:31 2013] Extracting stamp from image fullrun_mos2_xmm0500070701_pi300-10000_cl_sm2.00.img.gz, (255, 231) - (330, 306)
[Tue May 21 04:13:31 2013] XMMSAS bgd. selection expression = annulus(25399.005310, 23287.625122, 1087.500000, 2175.000000, X, Y) && !ellipse(24954.547000, 21978.808600, 983.632028, 743.914421, 6.415620, X, Y) && !ellipse(24396.417000, 23186.249680, 1023.152029, 615.834418, 65.045400, X, Y) && !ellipse(25498.034600, 23908.125200, 351.354410, 351.354410, 0.000000, X, Y) && !ellipse(25774.055800, 22918.159000, 577.409617, 577.409617, 0.000000, X, Y) && !ellipse(26125.312469, 25888.621918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25631.968201, 21199.011810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23758.956543, 22053.113495, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 21 04:13:31 2013] Writing fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src20.gif
[Tue May 21 04:15:43 2013] Mean detx,y = (-288.32, 542.97) 
[Tue May 21 04:15:45 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 04:16:00 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 04:16:00 2013] Setting source spectrum file to fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue May 21 04:16:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue May 21 04:47:25 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 21 04:47:25 2013] rmf not generated due to insufficient counts
[Tue May 21 04:58:06 2013] Updating aperture counts using extracted products
[Tue May 21 04:58:06 2013] Total counts from fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 1430.00
[Tue May 21 04:58:06 2013] Total counts from fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src20_bgd.pi.gz = 850.00
[Tue May 21 04:58:06 2013] Got source and background scale factors 1144524.000000, 6857856.000000
[Tue May 21 04:58:06 2013] User source parameters:
  Position = (292.5, 268.2) = 12 1 52.63 -18 52 5.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1288.1 +/- 38.8
  Background aperture counts = 141.9
  Rate = 0.04 +/- 0.001

[Tue May 21 04:58:06 2013] Updating counts from extracted products
[Tue May 21 04:58:06 2013] Set source signif. to 1288.14/11.91 = 108.15
[Tue May 21 04:58:14 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 04:58:14 2013] Using photon index=1.80, rate=0.0408, arf fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src20.arf
[Tue May 21 04:58:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 04:58:14 2013] Updating source flux to 4.6e-13
[Tue May 21 04:58:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 04:58:32 2013] xmm0500070701/analysis//spectral/fullrun_mos2_xmm0500070701_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete