[Mon May 20 17:26:19 2013] Detection parameters:
  Position = (311.5, 206.5) = 12 1 46.80 -18 56 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.8 +/- 12.1
  Background counts = 18.2
  Rate = 0.004 +/- 0.0006

[Mon May 20 17:26:19 2013] Off-axis axis estimate = 6.73'
[Mon May 20 18:26:20 2013] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Mon May 20 18:26:20 2013] Initial guess for spatial extent in simple fitting = 9.79"
[Mon May 20 18:26:20 2013] source mask rpix=2.3, npix_max = 30, mask sum = 17, frac = 0.561
[Mon May 20 18:26:20 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 9.79"
[Mon May 20 19:34:00 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_src12.ximg exists
[Mon May 20 19:34:00 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon May 20 19:34:00 2013] Fit fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_src12 appears to have run properly
[Mon May 20 19:34:01 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon May 20 19:34:01 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon May 20 19:34:01 2013] Fit fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Mon May 20 20:46:29 2013] Source 30 is offset by 1.848708 and -1.841628 pixels which is larger than
2 X fitted extent = 1.081968 x 1.081968, not incorporating fit results
[Mon May 20 20:46:29 2013] Warning, spatial fit 12 centroid is now closest to src. 29
[Mon May 20 20:46:29 2013] Vigneting correction estimate = 1.000000
[Mon May 20 20:46:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 20:46:29 2013] Assessing source extent using major
[Mon May 20 20:46:29 2013] Source does appear to be extended
[Mon May 20 20:46:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 21:34:57 2013] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Mon May 20 21:34:57 2013] Initial guess for spatial extent in simple fitting = 9.79"
[Mon May 20 21:34:57 2013] source mask rpix=2.3, npix_max = 30, mask sum = 17, frac = 0.561
[Mon May 20 21:34:57 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 9.79"
[Mon May 20 22:37:10 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_src12.ximg exists
[Mon May 20 22:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_src12.csv
[Mon May 20 22:37:10 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon May 20 22:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_src12.csv
[Mon May 20 22:37:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 22:37:10 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon May 20 22:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon May 20 22:37:10 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon May 20 22:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon May 20 22:37:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:01:31 2013] Source 30 is offset by 1.848708 and -1.841628 pixels which is larger than
2 X fitted extent = 1.081968 x 1.081968, not incorporating fit results
[Tue May 21 00:01:31 2013] Spatial fit model total counts = 331.624000, observed total counts = 249.000000
[Tue May 21 00:01:31 2013] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 00:01:31 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:01:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:01:31 2013] Assessing source extent using major
[Tue May 21 00:01:31 2013] Source does appear to be extended
[Tue May 21 00:01:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 03:17:15 2013] XMMSAS src. selection expression = ellipse(27052.387634, 17917.228333, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 21 03:17:15 2013] Writing source region out to fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src30_src.reg
[Tue May 21 03:17:15 2013] Extracting stamp from image fullrun_mos1_xmm0500070701_pi300-10000_cl_sm2.00.img.gz, (274, 169) - (349, 244)
[Tue May 21 03:17:15 2013] XMMSAS bgd. selection expression = annulus(27052.387634, 17917.228333, 1087.500000, 2175.000000, X, Y) && !ellipse(26137.955719, 18756.026428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25919.016000, 20927.566000, 1333.264038, 1333.264038, 0.000000, X, Y)
[Tue May 21 03:17:15 2013] Writing fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src30.gif
[Tue May 21 03:26:38 2013] Mean detx,y = (6428.52, 819.96) 
[Tue May 21 03:26:40 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 03:27:07 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 03:27:08 2013] Setting source spectrum file to fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue May 21 03:27:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Tue May 21 03:58:23 2013] Not generating rmf since there are only 81 counts
[Tue May 21 03:58:23 2013] rmf not generated due to insufficient counts
[Tue May 21 04:57:56 2013] Updating aperture counts using extracted products
[Tue May 21 04:57:56 2013] Total counts from fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 188.00
[Tue May 21 04:57:57 2013] Total counts from fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src30_bgd.pi.gz = 802.00
[Tue May 21 04:57:57 2013] Got source and background scale factors 1139234.000000, 8733730.000000
[Tue May 21 04:57:57 2013] User source parameters:
  Position = (311.5, 206.5) = 12 1 46.80 -18 56 39.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 83.4 +/- 14.7
  Background aperture counts = 104.6
  Rate = 0.003 +/- 0.0005

[Tue May 21 04:57:57 2013] Updating counts from extracted products
[Tue May 21 04:57:57 2013] Set source signif. to 83.39/10.23 = 8.15
[Tue May 21 04:58:03 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 04:58:03 2013] Using photon index=1.80, rate=0.00264, arf fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src30.arf
[Tue May 21 04:58:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 04:58:03 2013] Updating source flux to 3.9e-14
[Tue May 21 04:58:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 04:58:24 2013] xmm0500070701/analysis//spectral/fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete