[Mon May 20 17:26:18 2013] Detection parameters:
  Position = (293.9, 246.1) = 12 1 52.21 -18 53 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.4 +/- 14.2
  Background counts = 19.6
  Rate = 0.003 +/- 0.0005

[Mon May 20 17:26:19 2013] Off-axis axis estimate = 3.81'
[Mon May 20 18:26:20 2013] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Mon May 20 18:26:20 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Mon May 20 18:26:20 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.071
[Mon May 20 18:26:20 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 8.33"
[Mon May 20 19:34:00 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_src19.ximg exists
[Mon May 20 19:34:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_src19.csv
[Mon May 20 19:34:00 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon May 20 19:34:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_src19.csv
[Mon May 20 19:34:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 19:34:01 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon May 20 19:34:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src19.csv
[Mon May 20 19:34:01 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon May 20 19:34:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src19.csv
[Mon May 20 19:34:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 20:46:29 2013] Warning, spatial fit 19 centroid is now closest to src. 26
[Mon May 20 20:46:29 2013] Vigneting correction estimate = 1.000000
[Mon May 20 20:46:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 20:46:29 2013] Assessing source extent using major
[Mon May 20 20:46:29 2013] Source does appear to be extended
[Mon May 20 20:46:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 20:46:29 2013] Source is confused with source 1
[Mon May 20 21:34:57 2013] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Mon May 20 21:34:57 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Mon May 20 21:34:57 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.071
[Mon May 20 21:34:57 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 8.33"
[Mon May 20 22:37:10 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_src19.ximg exists
[Mon May 20 22:37:10 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon May 20 22:37:10 2013] Fit fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_src19 appears to have run properly
[Mon May 20 22:37:10 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon May 20 22:37:10 2013] fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon May 20 22:37:10 2013] Fit fullrun_mos1_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Tue May 21 00:01:31 2013] Spatial fit model total counts = 880.505000, observed total counts = 953.000000
[Tue May 21 00:01:31 2013] Offset between fit and detection position for source 25 = 6.798982 pixels
[Tue May 21 00:01:31 2013] 858.695000 total counts/ 465.916000 bgd. counts: snr = 18.196776
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 6.798982 pixels
  Position = (298.5, 241.1) = 12 1 50.80 -18 54 3.0
  Extent = 16.7 (16.6-33.3)", rotation angle = 0
  Source counts = 392.8 +/- 29.3
  Background counts = 465.9
  Rate = 0.01 +/- 0.0009
[Tue May 21 00:01:31 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:01:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:01:31 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:01:31 2013] Source does appear to be extended
[Tue May 21 00:01:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 03:17:15 2013] XMMSAS src. selection expression = ellipse(25919.016000, 20927.566000, 999.948029, 999.948029, 0.000000, X, Y)
[Tue May 21 03:17:15 2013] Writing source region out to fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src25_src.reg
[Tue May 21 03:17:15 2013] Extracting stamp from image fullrun_mos1_xmm0500070701_pi300-10000_cl_sm2.00.img.gz, (241, 184) - (356, 299)
[Tue May 21 03:17:15 2013] XMMSAS bgd. selection expression = annulus(25919.016000, 20927.566000, 1666.580048, 3333.160096, X, Y) && !ellipse(24956.740400, 21976.150000, 1264.736036, 916.272026, 39.943900, X, Y) && !ellipse(24408.152800, 23181.575400, 1134.592033, 542.390416, 64.267600, X, Y) && !ellipse(25504.578800, 23923.240400, 352.116810, 352.116810, 0.000000, X, Y) && !ellipse(25786.476600, 22983.073800, 1136.160033, 887.312026, 26.494200, X, Y) && !ellipse(25028.756165, 23422.880280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.955719, 18756.026428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27052.387634, 17917.228333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23982.568420, 21766.508392, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 21 03:17:15 2013] Writing fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src25.gif
[Tue May 21 03:30:22 2013] Mean detx,y = (2995.29, 622.43) 
[Tue May 21 03:30:24 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 03:30:47 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 03:30:47 2013] Setting source spectrum file to fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue May 21 03:30:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue May 21 04:57:58 2013] Updating aperture counts using extracted products
[Tue May 21 04:57:58 2013] Total counts from fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 634.00
[Tue May 21 04:57:58 2013] Total counts from fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src25_bgd.pi.gz = 1696.00
[Tue May 21 04:57:58 2013] Got source and background scale factors 3032896.000000, 15954832.000000
[Tue May 21 04:57:58 2013] User source parameters:
  Position = (298.5, 241.1) = 12 1 50.80 -18 54 3.0
  Extent = 16.7 (16.6-33.3)", rotation angle = 0
  Source aperture counts = 311.6 +/- 26.2
  Background aperture counts = 322.4
  Rate = 0.01 +/- 0.0008

[Tue May 21 04:58:03 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 04:58:03 2013] Using photon index=1.80, rate=0.0124, arf fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src25.arf
[Tue May 21 04:58:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 04:58:03 2013] Updating source flux to 1.3e-13
[Tue May 21 04:58:17 2013] Flag c found in src. 25 procflags, skipping spectral fitting
[Tue May 21 04:58:24 2013] xmm0500070701/analysis//spectral/fullrun_mos1_xmm0500070701_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete