[Mon Aug 13 22:18:19 2012] Detection parameters:
  Position = (287.3, 243.2) = 12 1 53.92 -18 53 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.0 +/- 17.7
  Background counts = 69.9
  Rate = 0.004 +/- 0.0008

[Mon Aug 13 22:18:20 2012] Off-axis axis estimate = 4.09'
[Mon Aug 13 22:22:20 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 22:22:20 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Mon Aug 13 22:22:20 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.043
[Mon Aug 13 22:22:20 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 8.47"
[Mon Aug 13 23:51:52 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_src32.ximg exists
[Mon Aug 13 23:51:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_src32.csv
[Mon Aug 13 23:51:52 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_src32_1.ximg exists
[Mon Aug 13 23:51:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_src32.csv
[Mon Aug 13 23:51:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 23:51:53 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Mon Aug 13 23:51:53 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Mon Aug 13 23:51:53 2012] Fit fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Tue Aug 14 01:53:12 2012] Warning, spatial fit 32 centroid is now closest to src. 1
[Tue Aug 14 01:53:12 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 01:53:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 01:53:12 2012] Assessing source extent using major
[Tue Aug 14 01:53:12 2012] Source does appear to be extended
[Tue Aug 14 01:53:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 01:53:12 2012] Source is confused with source 1
[Tue Aug 14 01:53:35 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 01:53:35 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Tue Aug 14 01:53:35 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.043
[Tue Aug 14 01:53:35 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 8.47"
[Tue Aug 14 03:16:34 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src29.ximg exists
[Tue Aug 14 03:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src29.csv
[Tue Aug 14 03:16:34 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src29_1.ximg exists
[Tue Aug 14 03:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src29.csv
[Tue Aug 14 03:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 03:16:34 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Tue Aug 14 03:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src29.csv
[Tue Aug 14 03:16:34 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Tue Aug 14 03:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src29.csv
[Tue Aug 14 03:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 05:17:48 2012] Source 34 is offset by 3.570959 and -9.073315 pixels which is larger than
2 X fitted extent = 2.655770 x 2.655770, not incorporating fit results
[Tue Aug 14 05:17:48 2012] Spatial fit model total counts = 712.202000, observed total counts = 1569.000000
[Tue Aug 14 05:17:48 2012] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 14 05:17:48 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 05:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 05:17:48 2012] Assessing source extent using major
[Tue Aug 14 05:17:48 2012] Source does appear to be extended
[Tue Aug 14 05:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 05:18:10 2012] XMMSAS src. selection expression = ellipse(24942.693390, 21107.507553, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 14 05:18:10 2012] Writing source region out to fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src34_src.reg
[Tue Aug 14 05:18:10 2012] Extracting stamp from image fullrun_pn_xmm0500070601_pi300-10000_cl_sm2.00.img.gz, (250, 206) - (325, 281)
[Tue Aug 14 05:18:10 2012] XMMSAS bgd. selection expression = annulus(24942.693390, 21107.507553, 1087.500000, 2175.000000, X, Y) && !ellipse(24919.514184, 21857.300000, 1354.800039, 1354.800039, 0.000000, X, Y) && !ellipse(24398.821259, 23097.779907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25181.967285, 23302.695068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25699.889160, 22699.286560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26075.297028, 18755.152924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.547546, 22158.852692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23964.394745, 21268.193909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26344.535583, 20945.929108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27105.766998, 19382.459351, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 14 05:18:10 2012] Writing fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src34.gif
[Tue Aug 14 05:43:20 2012] Mean detx,y = (1544.37, -2491.95) 
[Tue Aug 14 05:43:23 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 05:43:44 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 05:43:44 2012] Setting source spectrum file to fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Tue Aug 14 05:43:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Tue Aug 14 07:53:07 2012] Not generating rmf since there are only 87 counts
[Tue Aug 14 07:53:07 2012] rmf not generated due to insufficient counts
[Tue Aug 14 09:03:58 2012] Updating aperture counts using extracted products
[Tue Aug 14 09:03:58 2012] Error reading totcts from fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Tue Aug 14 09:03:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 09:03:59 2012] Using photon index=1.80, rate=0.00404, arf fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src34.arf
[Tue Aug 14 09:03:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 09:03:59 2012] Updating source flux to 1.2e-14
[Tue Aug 14 09:05:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting