[Mon Aug 13 22:18:19 2012] Detection parameters:
  Position = (248.0, 265.2) = 12 2 5.94 -18 52 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.2 +/- 15.2
  Background counts = 66.9
  Rate = 0.003 +/- 0.0007

[Mon Aug 13 22:18:20 2012] Off-axis axis estimate = 4.38'
[Mon Aug 13 22:22:20 2012] Using EEF radius (= 8.62 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 22:22:20 2012] Initial guess for spatial extent in simple fitting = 8.62"
[Mon Aug 13 22:22:20 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.015
[Mon Aug 13 22:22:20 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.62"
[Mon Aug 13 23:51:52 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_src27.ximg exists
[Mon Aug 13 23:51:52 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Aug 13 23:51:52 2012] Fit fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_src27 appears to have run properly
[Mon Aug 13 23:51:53 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Aug 13 23:51:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src27.csv
[Mon Aug 13 23:51:53 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Aug 13 23:51:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src27.csv
[Mon Aug 13 23:51:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 01:53:12 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 16.270771 pixels away
[Tue Aug 14 01:53:12 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 01:53:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 01:53:12 2012] Assessing source extent using major
[Tue Aug 14 01:53:12 2012] Source does appear to be extended
[Tue Aug 14 01:53:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 01:53:35 2012] Using EEF radius (= 8.62 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 01:53:35 2012] Initial guess for spatial extent in simple fitting = 8.62"
[Tue Aug 14 01:53:35 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.015
[Tue Aug 14 01:53:35 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 8.62"
[Tue Aug 14 03:16:34 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src25.ximg exists
[Tue Aug 14 03:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src25.csv
[Tue Aug 14 03:16:34 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue Aug 14 03:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src25.csv
[Tue Aug 14 03:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 03:16:34 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue Aug 14 03:16:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue Aug 14 03:16:34 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue Aug 14 03:16:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue Aug 14 03:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 05:17:48 2012] Source 28 is offset by -3.588246 and -8.720018 pixels which is larger than
2 X fitted extent = 1.006923 x 1.006923, not incorporating fit results
[Tue Aug 14 05:17:48 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 05:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 05:17:48 2012] Assessing source extent using major
[Tue Aug 14 05:17:48 2012] Source does appear to be extended
[Tue Aug 14 05:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 05:18:10 2012] XMMSAS src. selection expression = ellipse(21529.346573, 23021.920410, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 14 05:18:10 2012] Writing source region out to fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src28_src.reg
[Tue Aug 14 05:18:10 2012] Extracting stamp from image fullrun_pn_xmm0500070601_pi300-10000_cl_sm2.00.img.gz, (211, 228) - (286, 303)
[Tue Aug 14 05:18:10 2012] XMMSAS bgd. selection expression = annulus(21529.346573, 23021.920410, 1087.500000, 2175.000000, X, Y) && !ellipse(24919.514184, 21857.300000, 1354.800039, 1354.800039, 0.000000, X, Y) && !ellipse(24398.821259, 23097.779907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23964.394745, 21268.193909, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 14 05:18:10 2012] Writing fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src28.gif
[Tue Aug 14 05:39:46 2012] Mean detx,y = (4153.08, 370.03) 
[Tue Aug 14 05:39:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 05:40:27 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 05:40:27 2012] Setting source spectrum file to fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Aug 14 05:40:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue Aug 14 07:52:17 2012] Not generating rmf since there are only 72 counts
[Tue Aug 14 07:52:17 2012] rmf not generated due to insufficient counts
[Tue Aug 14 09:03:58 2012] Updating aperture counts using extracted products
[Tue Aug 14 09:03:58 2012] Error reading totcts from fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Aug 14 09:03:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 09:03:59 2012] Using photon index=1.80, rate=0.00336, arf fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src28.arf
[Tue Aug 14 09:03:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 09:03:59 2012] Updating source flux to 9.7e-15
[Tue Aug 14 09:05:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting