[Mon Aug 13 22:18:18 2012] Detection parameters:
  Position = (281.0, 266.0) = 12 1 55.83 -18 52 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2120.3 +/- 57.2
  Background counts = 73.7
  Rate = 0.09 +/- 0.002

[Mon Aug 13 22:18:20 2012] Off-axis axis estimate = 2.67'
[Mon Aug 13 22:22:20 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 22:22:20 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Mon Aug 13 22:22:20 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.767
[Mon Aug 13 22:22:20 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.76"
[Mon Aug 13 23:51:52 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_src2.ximg exists
[Mon Aug 13 23:51:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_src2.csv
[Mon Aug 13 23:51:52 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Aug 13 23:51:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_src2.csv
[Mon Aug 13 23:51:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 23:51:52 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Aug 13 23:51:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Aug 13 23:51:52 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Aug 13 23:51:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Aug 13 23:51:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 01:53:12 2012] Source 2 is offset by -1.042399 and 6.616987 pixels which is larger than
2 X fitted extent = 2.227398 x 2.227398, not incorporating fit results
[Tue Aug 14 01:53:12 2012] Spatial fit model total counts = 4801.790000, observed total counts = 4196.000000
[Tue Aug 14 01:53:12 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 14 01:53:12 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 01:53:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 01:53:12 2012] Assessing source extent using major
[Tue Aug 14 01:53:12 2012] Source does appear to be extended
[Tue Aug 14 01:53:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 01:53:35 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 01:53:35 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Tue Aug 14 01:53:35 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.767
[Tue Aug 14 01:53:35 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.76"
[Tue Aug 14 03:16:33 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src2.ximg exists
[Tue Aug 14 03:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src2.csv
[Tue Aug 14 03:16:33 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Aug 14 03:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src2.csv
[Tue Aug 14 03:16:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 03:16:34 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Aug 14 03:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Aug 14 03:16:34 2012] fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Aug 14 03:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Aug 14 03:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 05:17:47 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Tue Aug 14 05:17:47 2012] Spatial fit model total counts = 6000.410000, observed total counts = 4763.000000
[Tue Aug 14 05:17:47 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 14 05:17:48 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 05:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 05:17:48 2012] Assessing source extent using major
[Tue Aug 14 05:17:48 2012] Source does appear to be extended
[Tue Aug 14 05:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 05:18:10 2012] Counts = 2120.344482, rescaling region sizes by 2.000000
[Tue Aug 14 05:18:10 2012] XMMSAS src. selection expression = ellipse(24398.821259, 23097.779907, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Aug 14 05:18:10 2012] Writing source region out to fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src2_src.reg
[Tue Aug 14 05:18:10 2012] Extracting stamp from image fullrun_pn_xmm0500070601_pi300-10000_cl_sm2.00.img.gz, (206, 191) - (356, 341)
[Tue Aug 14 05:18:10 2012] XMMSAS bgd. selection expression = annulus(24398.821259, 23097.779907, 4350.000000, 8700.000000, X, Y) && !ellipse(24919.514184, 21857.300000, 1354.800039, 1354.800039, 0.000000, X, Y) && !ellipse(25181.967285, 23302.695068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25699.889160, 22699.286560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26075.297028, 18755.152924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25416.821600, 23913.459400, 362.300810, 362.300810, 0.000000, X, Y) && !ellipse(14931.967819, 30603.707031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25678.457764, 30338.833344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31873.939423, 29592.316101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21877.706500, 29420.781000, 415.948012, 415.948012, 0.000000, X, Y) && !ellipse(28501.704407, 28818.529053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30193.005200, 28327.390200, 374.550927, 374.550927, 0.000000, X, Y) && !ellipse(22281.732200, 27377.104800, 657.468819, 657.468819, 0.000000, X, Y) && !ellipse(27854.896790, 27071.485260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24520.281400, 26600.989800, 403.070412, 403.070412, 0.000000, X, Y) && !ellipse(31539.626099, 26139.280579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26036.371643, 25901.756348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33712.042755, 25782.455261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21529.346573, 23021.920410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18327.053345, 22181.664703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.547546, 22158.852692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29960.616455, 21368.710663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23964.394745, 21268.193909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24942.693390, 21107.507553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26344.535583, 20945.929108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18727.873825, 19749.821152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27105.766998, 19382.459351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27019.138702, 17709.374054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29039.227400, 17354.713460, 548.413948, 548.413948, 0.000000, X, Y) && !ellipse(30439.570465, 16934.890060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16535.602859, 16976.450562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25140.396400, 15202.814800, 508.365615, 508.365615, 0.000000, X, Y) && !ellipse(19106.157089, 14411.198425, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 14 05:18:10 2012] Writing fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src2.gif
[Tue Aug 14 05:19:26 2012] Mean detx,y = (1166.15, -801.16) 
[Tue Aug 14 05:19:31 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 05:21:59 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 05:22:00 2012] Setting source spectrum file to fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug 14 05:22:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Aug 14 06:17:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 14 06:17:20 2012] rmf not generated due to insufficient counts
[Tue Aug 14 09:03:57 2012] Updating aperture counts using extracted products
[Tue Aug 14 09:03:57 2012] Error reading totcts from fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug 14 09:03:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 09:03:58 2012] Using photon index=1.80, rate=0.0918, arf fullrun_pn_xmm0500070601_pi300-10000_pass1_cl_src2.arf
[Tue Aug 14 09:03:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 09:03:58 2012] Updating source flux to 2.1e-13
[Tue Aug 14 09:05:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting