[Mon Aug 13 22:19:48 2012] Detection parameters:
  Position = (300.6, 216.4) = 12 1 49.83 -18 55 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 258.2 +/- 20.1
  Background counts = 18.6
  Rate = 0.01 +/- 0.0009

[Mon Aug 13 22:19:48 2012] Off-axis axis estimate = 5.95'
[Tue Aug 14 01:02:41 2012] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 01:02:41 2012] Initial guess for spatial extent in simple fitting = 9.40"
[Tue Aug 14 01:02:41 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.882
[Tue Aug 14 01:02:41 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.40"
[Tue Aug 14 01:53:03 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_src5.ximg exists
[Tue Aug 14 01:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_src5.csv
[Tue Aug 14 01:53:03 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Aug 14 01:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_src5.csv
[Tue Aug 14 01:53:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 01:53:03 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Aug 14 01:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Aug 14 01:53:03 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Aug 14 01:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Aug 14 01:53:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 01:53:23 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 12.978001 pixels away
[Tue Aug 14 01:53:23 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 01:53:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 01:53:23 2012] Assessing source extent using major
[Tue Aug 14 01:53:23 2012] Source does appear to be extended
[Tue Aug 14 01:53:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 04:23:45 2012] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:23:45 2012] Initial guess for spatial extent in simple fitting = 9.40"
[Tue Aug 14 04:23:45 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.882
[Tue Aug 14 04:23:45 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.40"
[Tue Aug 14 05:17:38 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_src5.ximg exists
[Tue Aug 14 05:17:38 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Aug 14 05:17:38 2012] Fit fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_src5 appears to have run properly
[Tue Aug 14 05:17:38 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Aug 14 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Aug 14 05:17:38 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Aug 14 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Aug 14 05:17:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 05:17:58 2012] Spatial fit model total counts = 418.458000, observed total counts = 393.000000
[Tue Aug 14 05:17:58 2012] Offset between fit and detection position for source 28 = 0.184823 pixels
[Tue Aug 14 05:17:58 2012] 425.547000 total counts/ 246.118000 bgd. counts: snr = 11.437232
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.184823 pixels
  Position = (300.6, 216.5) = 12 1 49.82 -18 55 49.7
  Extent = 5.4" x 5.0", rotation angle = 351
  Source counts = 179.4 +/- 20.6
  Background counts = 246.1
  Rate = 0.006 +/- 0.0007
[Tue Aug 14 05:17:58 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 05:17:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 05:17:58 2012] Assessing source extent using major
[Tue Aug 14 05:17:58 2012] Source does appear to be extended
[Tue Aug 14 05:17:58 2012] Computing asymmetry using major and minor axis, asym = 1.07
[Tue Aug 14 08:38:20 2012] XMMSAS src. selection expression = ellipse(26105.366896, 18790.588341, 321.273213, 300.125964, 351.034354, X, Y)
[Tue Aug 14 08:38:20 2012] Writing source region out to fullrun_mos2_xmm0500070601_pi300-10000_pass1_cl_src28_src.reg
[Tue Aug 14 08:38:20 2012] Extracting stamp from image fullrun_mos2_xmm0500070601_pi300-10000_cl_sm2.00.img.gz, (282, 198) - (319, 235)
[Tue Aug 14 08:38:20 2012] XMMSAS bgd. selection expression = annulus(26105.366896, 18790.588341, 535.455355, 1070.910709, X, Y) && !ellipse(26021.168000, 20913.856000, 1342.768039, 1342.768039, 0.000000, X, Y)
[Tue Aug 14 08:38:20 2012] Writing fullrun_mos2_xmm0500070601_pi300-10000_pass1_cl_src28.gif
[Tue Aug 14 08:39:21 2012] Mean detx,y = (-1186.16, 5089.44) 
[Tue Aug 14 08:39:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 08:39:30 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 08:39:30 2012] Setting source spectrum file to fullrun_mos2_xmm0500070601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Aug 14 08:39:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500070601_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue Aug 14 09:04:00 2012] Updating aperture counts using extracted products
[Tue Aug 14 09:04:00 2012] Error reading totcts from fullrun_mos2_xmm0500070601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Aug 14 09:04:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 09:04:00 2012] Using photon index=1.80, rate=0.00622, arf fullrun_mos2_xmm0500070601_pi300-10000_pass1_cl_src28.arf
[Tue Aug 14 09:04:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 09:04:00 2012] Updating source flux to 1e-13