[Mon Aug 13 22:19:47 2012] Detection parameters:
  Position = (397.4, 314.8) = 12 1 20.17 -18 48 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.4 +/- 10.2
  Background counts = 14.9
  Rate = 0.003 +/- 0.0007

[Mon Aug 13 22:19:48 2012] Off-axis axis estimate = 7.27'
[Tue Aug 14 01:02:41 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 01:02:41 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Tue Aug 14 01:02:41 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.947
[Tue Aug 14 01:02:41 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.07"
[Tue Aug 14 01:53:03 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_src19.ximg exists
[Tue Aug 14 01:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_src19.csv
[Tue Aug 14 01:53:03 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Aug 14 01:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_src19.csv
[Tue Aug 14 01:53:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 01:53:03 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Aug 14 01:53:03 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Aug 14 01:53:03 2012] Fit fullrun_mos2_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Aug 14 01:53:23 2012] Spatial fit model total counts = 191.999000, observed total counts = 192.000000
[Tue Aug 14 01:53:23 2012] Offset between fit and detection position for source 10 = 0.465957 pixels
[Tue Aug 14 01:53:23 2012] 191.986500 total counts/ 162.193000 bgd. counts: snr = 2.339405
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.465957 pixels
  Position = (396.9, 314.9) = 12 1 20.31 -18 48 41.9
  Extent = 6.6 (4.3-12.6)", rotation angle = 0
  Source counts = 29.8 +/- 13.9
  Background counts = 162.2
  Rate = 0.001 +/- 0.0005
[Tue Aug 14 01:53:23 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 01:53:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 01:53:23 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 01:53:23 2012] Source does appear to be extended
[Tue Aug 14 01:53:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 04:23:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:23:45 2012] Initial guess for spatial extent in simple fitting = 6.58"
[Tue Aug 14 04:23:45 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.987
[Tue Aug 14 04:23:45 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 6.58"
[Tue Aug 14 05:17:38 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_src19.ximg exists
[Tue Aug 14 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_src19.csv
[Tue Aug 14 05:17:38 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue Aug 14 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_src19.csv
[Tue Aug 14 05:17:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 05:17:38 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue Aug 14 05:17:38 2012] fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Aug 14 05:17:38 2012] Fit fullrun_mos2_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Tue Aug 14 05:17:58 2012] Warning, spatial fit 19 centroid is now closest to src. 14
[Tue Aug 14 05:17:58 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 05:17:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 05:17:58 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 05:17:58 2012] Source does appear to be extended
[Tue Aug 14 05:17:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 08:38:21 2012] XMMSAS src. selection expression = ellipse(34485.187140, 27344.166320, 395.036411, 395.036411, 0.000000, X, Y)
[Tue Aug 14 08:38:21 2012] Writing source region out to fullrun_mos2_xmm0500070601_pi300-10000_pass1_cl_src10_src.reg
[Tue Aug 14 08:38:21 2012] Extracting stamp from image fullrun_mos2_xmm0500070601_pi300-10000_cl_sm2.00.img.gz, (374, 292) - (420, 338)
[Tue Aug 14 08:38:21 2012] XMMSAS bgd. selection expression = annulus(34485.187140, 27344.166320, 658.394019, 1316.788038, X, Y)
[Tue Aug 14 08:38:21 2012] Writing fullrun_mos2_xmm0500070601_pi300-10000_pass1_cl_src10.gif
[Tue Aug 14 08:42:27 2012] Mean detx,y = (9705.37, 140.90) 
[Tue Aug 14 08:42:28 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 08:42:35 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 08:42:35 2012] Setting source spectrum file to fullrun_mos2_xmm0500070601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Aug 14 08:42:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500070601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Aug 14 08:57:54 2012] Not generating rmf since there are only 29 counts
[Tue Aug 14 08:57:54 2012] rmf not generated due to insufficient counts
[Tue Aug 14 09:04:00 2012] Updating aperture counts using extracted products
[Tue Aug 14 09:04:00 2012] Error reading totcts from fullrun_mos2_xmm0500070601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Aug 14 09:04:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 09:04:00 2012] Using photon index=1.80, rate=0.00103, arf fullrun_mos2_xmm0500070601_pi300-10000_pass1_cl_src10.arf
[Tue Aug 14 09:04:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 09:04:00 2012] Updating source flux to 2.1e-14
[Tue Aug 14 09:04:49 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting