[Mon Aug 13 22:19:05 2012] Detection parameters:
  Position = (284.4, 256.4) = 12 1 54.78 -18 52 56.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 283.8 +/- 24.7
  Background counts = 19.8
  Rate = 0.01 +/- 0.0009

[Mon Aug 13 22:19:06 2012] Off-axis axis estimate = 3.21'
[Mon Aug 13 23:51:53 2012] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 23:51:53 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Mon Aug 13 23:51:53 2012] source mask rpix=1.8, npix_max = 22, mask sum = 23, frac = 1.044
[Mon Aug 13 23:51:53 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.03"
[Tue Aug 14 01:02:40 2012] fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_src7.ximg exists
[Tue Aug 14 01:02:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_src7.csv
[Tue Aug 14 01:02:40 2012] fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Aug 14 01:02:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_src7.csv
[Tue Aug 14 01:02:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 01:02:41 2012] fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Aug 14 01:02:41 2012] fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Aug 14 01:02:41 2012] Fit fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Aug 14 01:53:18 2012] Spatial fit model total counts = 1712.460000, observed total counts = 1710.000000
[Tue Aug 14 01:53:18 2012] Offset between fit and detection position for source 5 = 5.060297 pixels
[Tue Aug 14 01:53:18 2012] Warning, changing simple spatial fit ID from 7 to 3
[Tue Aug 14 01:53:18 2012] 1785.980028 total counts/ 1785.980000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 5.060297 pixels
  Position = (288.1, 259.9) = 12 1 53.65 -18 52 41.3
  Extent = 15.5 (15.5-31.0)", rotation angle = 0
  Source counts = 0.0 +/- 42.3
  Background counts = 1786.0
  Rate = 1e-09 +/- 0.001
  Deleting source due to low Poisson probability