[Mon Aug 13 22:19:04 2012] Detection parameters:
  Position = (290.9, 268.0) = 12 1 52.81 -18 52 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 394.3 +/- 27.1
  Background counts = 19.8
  Rate = 0.01 +/- 0.0009

[Mon Aug 13 22:19:06 2012] Off-axis axis estimate = 2.28'
[Mon Aug 13 23:51:53 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 23:51:53 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Mon Aug 13 23:51:53 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.798
[Mon Aug 13 23:51:53 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.57"
[Tue Aug 14 01:02:40 2012] fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_src5.ximg exists
[Tue Aug 14 01:02:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_src5.csv
[Tue Aug 14 01:02:40 2012] fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Aug 14 01:02:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_src5.csv
[Tue Aug 14 01:02:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 01:02:41 2012] fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Aug 14 01:02:41 2012] fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Aug 14 01:02:41 2012] Fit fullrun_mos1_xmm0500070601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Aug 14 01:53:18 2012] Warning, spatial fit 5 centroid is now closest to src. 3
[Tue Aug 14 01:53:18 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 01:53:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 01:53:18 2012] Assessing source extent using major
[Tue Aug 14 01:53:18 2012] Source does appear to be extended
[Tue Aug 14 01:53:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 01:53:18 2012] Source is confused with source 3
[Tue Aug 14 03:16:34 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 03:16:34 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Tue Aug 14 03:16:34 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.798
[Tue Aug 14 03:16:34 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.57"
[Tue Aug 14 04:23:44 2012] fullrun_mos1_xmm0500070601_pi300-10000_cl_pass1_src5.ximg exists
[Tue Aug 14 04:23:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070601_pi300-10000_cl_pass1_src5.csv
[Tue Aug 14 04:23:44 2012] fullrun_mos1_xmm0500070601_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Aug 14 04:23:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070601_pi300-10000_cl_pass1_src5.csv
[Tue Aug 14 04:23:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500070601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500070601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 04:23:44 2012] fullrun_mos1_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Aug 14 04:23:44 2012] fullrun_mos1_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Aug 14 04:23:44 2012] Fit fullrun_mos1_xmm0500070601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Aug 14 05:17:52 2012] Source 2 is offset by -2.158333 and -7.450412 pixels which is larger than
2 X fitted extent = 2.018722 x 2.018722, not incorporating fit results
[Tue Aug 14 05:17:52 2012] Source 2 is offset by -1.975671 and -7.444021 pixels which is larger than
2 X fitted extent = 2.013963 x 2.013963, not incorporating fit results
[Tue Aug 14 05:17:53 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 21.716992 pixels away
[Tue Aug 14 05:17:53 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 05:17:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 05:17:53 2012] Assessing source extent using major
[Tue Aug 14 05:17:53 2012] Source does appear to be extended
[Tue Aug 14 05:17:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 08:01:28 2012] XMMSAS src. selection expression = ellipse(25257.917053, 23263.666138, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 14 08:01:28 2012] Writing source region out to fullrun_mos1_xmm0500070601_pi300-10000_pass1_cl_src2_src.reg
[Tue Aug 14 08:01:28 2012] Extracting stamp from image fullrun_mos1_xmm0500070601_pi300-10000_cl_sm2.00.img.gz, (253, 230) - (328, 305)
[Tue Aug 14 08:01:28 2012] XMMSAS bgd. selection expression = annulus(25257.917053, 23263.666138, 1087.500000, 2175.000000, X, Y) && !ellipse(24929.452000, 21854.996000, 867.256025, 867.256025, 0.000000, X, Y) && !ellipse(25433.105840, 23911.145600, 360.452810, 360.452810, 0.000000, X, Y) && !ellipse(24664.144000, 23144.972000, 1210.712035, 1210.712035, 0.000000, X, Y) && !ellipse(26351.045715, 20831.790726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25309.753845, 21117.301956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26019.778000, 25887.043800, 521.078415, 521.078415, 0.000000, X, Y) && !ellipse(24279.464000, 22863.740000, 1244.472036, 1244.472036, 0.000000, X, Y)
[Tue Aug 14 08:01:28 2012] Writing fullrun_mos1_xmm0500070601_pi300-10000_pass1_cl_src2.gif
[Tue Aug 14 08:02:04 2012] Mean detx,y = (809.22, 208.44) 
[Tue Aug 14 08:02:05 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 08:02:12 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 08:02:13 2012] Setting source spectrum file to fullrun_mos1_xmm0500070601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug 14 08:02:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500070601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Aug 14 08:24:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 14 08:24:44 2012] rmf not generated due to insufficient counts
[Tue Aug 14 09:03:59 2012] Updating aperture counts using extracted products
[Tue Aug 14 09:03:59 2012] Error reading totcts from fullrun_mos1_xmm0500070601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug 14 09:03:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 09:03:59 2012] Using photon index=1.80, rate=0.0138, arf fullrun_mos1_xmm0500070601_pi300-10000_pass1_cl_src2.arf
[Tue Aug 14 09:03:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 09:03:59 2012] Updating source flux to 1.4e-13
[Tue Aug 14 09:04:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting