[Sun Mar 11 15:32:57 2012] Detection parameters:
  Position = (295.2, 315.8) = 12 1 53.94 -18 52 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1396.8 +/- 53.5
  Background counts = 209.4
  Rate = 0.05 +/- 0.002

[Sun Mar 11 15:32:58 2012] Off-axis axis estimate = 1.28'
[Sun Mar 11 15:35:56 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 15:35:56 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Sun Mar 11 15:35:56 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.886
[Sun Mar 11 15:35:56 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.07"
[Sun Mar 11 16:27:50 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_src3.ximg exists
[Sun Mar 11 16:27:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_src3.csv
[Sun Mar 11 16:27:50 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Mar 11 16:27:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_src3.csv
[Sun Mar 11 16:27:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:27:50 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Mar 11 16:27:50 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Mar 11 16:27:50 2012] Fit fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Mar 11 17:30:46 2012] Warning, spatial fit 3 centroid is now closest to src. 5
[Sun Mar 11 17:30:46 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.140466 pixels away
[Sun Mar 11 17:30:46 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 17:30:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 17:30:46 2012] Assessing source extent using major
[Sun Mar 11 17:30:46 2012] Source does appear to be extended
[Sun Mar 11 17:30:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 17:30:46 2012] Source is confused with source 5
[Sun Mar 11 17:31:03 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 17:31:03 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Sun Mar 11 17:31:03 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.886
[Sun Mar 11 17:31:03 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.07"
[Sun Mar 11 18:25:33 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass1_src3.ximg exists
[Sun Mar 11 18:25:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070501_pi300-10000_cl_pass1_src3.csv
[Sun Mar 11 18:25:33 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Mar 11 18:25:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070501_pi300-10000_cl_pass1_src3.csv
[Sun Mar 11 18:25:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 18:25:33 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Mar 11 18:25:33 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Mar 11 18:25:33 2012] Fit fullrun_pn_xmm0500070501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Mar 11 19:27:11 2012] Source 3 is offset by -5.981666 and -6.201773 pixels which is larger than
2 X fitted extent = 1.929706 x 1.929706, not incorporating fit results
[Sun Mar 11 19:27:11 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.605168 pixels away
[Sun Mar 11 19:27:11 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 19:27:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 19:27:11 2012] Assessing source extent using major
[Sun Mar 11 19:27:11 2012] Source does appear to be extended
[Sun Mar 11 19:27:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 19:27:21 2012] Counts = 1396.769409, rescaling region sizes by 2.000000
[Sun Mar 11 19:27:21 2012] XMMSAS src. selection expression = ellipse(25635.109100, 27426.223724, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Mar 11 19:27:21 2012] Writing source region out to fullrun_pn_xmm0500070501_pi300-10000_pass1_cl_src3_src.reg
[Sun Mar 11 19:27:21 2012] Extracting stamp from image fullrun_pn_xmm0500070501_pi300-10000_cl_sm2.00.img.gz, (220, 241) - (370, 391)
[Sun Mar 11 19:27:21 2012] XMMSAS bgd. selection expression = annulus(25635.109100, 27426.223724, 4350.000000, 8700.000000, X, Y) && !ellipse(26748.133402, 29948.752200, 411.060012, 411.060012, 0.000000, X, Y) && !ellipse(26162.962800, 27971.318800, 390.601611, 312.735209, 322.637000, X, Y) && !ellipse(25070.434000, 27167.418000, 1131.008033, 1131.008033, 0.000000, X, Y) && !ellipse(26434.596800, 26952.268800, 549.478416, 549.478416, 0.000000, X, Y) && !ellipse(25608.007000, 26052.127400, 892.048026, 892.048026, 0.000000, X, Y) && !ellipse(27746.330800, 21775.207800, 430.895212, 430.895212, 0.000000, X, Y) && !ellipse(29216.618835, 32866.182281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28554.518250, 31084.336365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30741.696869, 25362.851776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31144.003400, 21036.871400, 393.154411, 393.154411, 0.000000, X, Y) && !ellipse(19838.717800, 18476.405400, 383.914411, 383.914411, 0.000000, X, Y) && !ellipse(32256.292600, 30212.719800, 517.961615, 517.961615, 0.000000, X, Y) && !ellipse(34500.156342, 29775.831726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19115.229324, 26258.969299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26201.931305, 25108.537140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26809.933014, 22825.023438, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 11 19:27:21 2012] Writing fullrun_pn_xmm0500070501_pi300-10000_pass1_cl_src3.gif
[Sun Mar 11 19:28:45 2012] Mean detx,y = (-668.17, 219.14) 
[Sun Mar 11 19:28:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 19:31:21 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 19:31:21 2012] Setting source spectrum file to fullrun_pn_xmm0500070501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Mar 11 19:31:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500070501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Mar 11 20:00:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 11 20:00:00 2012] rmf not generated due to insufficient counts
[Mon Mar 12 00:59:25 2012] Updating aperture counts using extracted products
[Mon Mar 12 00:59:25 2012] Error reading totcts from fullrun_pn_xmm0500070501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Mar 12 00:59:26 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 00:59:26 2012] Using photon index=1.80, rate=0.0528, arf fullrun_pn_xmm0500070501_pi300-10000_pass1_cl_src3.arf
[Mon Mar 12 00:59:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 00:59:26 2012] Updating source flux to 1.2e-13
[Mon Mar 12 01:00:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting