[Sun Mar 11 15:32:57 2012] Detection parameters:
  Position = (308.3, 344.9) = 12 1 49.93 -18 49 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 805.3 +/- 39.9
  Background counts = 197.9
  Rate = 0.03 +/- 0.002

[Sun Mar 11 15:32:58 2012] Off-axis axis estimate = 3.44'
[Sun Mar 11 15:35:56 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 15:35:56 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Sun Mar 11 15:35:56 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.110
[Sun Mar 11 15:35:56 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.15"
[Sun Mar 11 16:27:50 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 11 16:27:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 16:27:50 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 11 16:27:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 16:27:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:27:50 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 11 16:27:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Mar 11 16:27:50 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 11 16:27:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Mar 11 16:27:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 17:30:46 2012] Source 1 is offset by -7.202257 and 6.355974 pixels which is larger than
2 X fitted extent = 0.936667 x 0.936667, not incorporating fit results
[Sun Mar 11 17:30:46 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 17:30:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 17:30:46 2012] Assessing source extent using major
[Sun Mar 11 17:30:46 2012] Source does appear to be extended
[Sun Mar 11 17:30:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 17:31:03 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 17:31:03 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Sun Mar 11 17:31:03 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.110
[Sun Mar 11 17:31:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.15"
[Sun Mar 11 18:25:33 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 11 18:25:33 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 11 18:25:33 2012] Fit fullrun_pn_xmm0500070501_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Mar 11 18:25:33 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 11 18:25:33 2012] fullrun_pn_xmm0500070501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 11 18:25:33 2012] Fit fullrun_pn_xmm0500070501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 11 19:27:11 2012] Spatial fit model total counts = 721.472000, observed total counts = 676.000000
[Sun Mar 11 19:27:11 2012] Offset between fit and detection position for source 1 = 0.291515 pixels
[Sun Mar 11 19:27:11 2012] 720.554000 total counts/ 393.841000 bgd. counts: snr = 16.462885
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.291515 pixels
  Position = (308.0, 344.8) = 12 1 50.02 -18 49 54.0
  Extent = 5.1 (4.6-5.7)", rotation angle = 0
  Source counts = 326.7 +/- 26.8
  Background counts = 393.8
  Rate = 0.02 +/- 0.002
[Sun Mar 11 19:27:11 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 19:27:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 19:27:11 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 19:27:11 2012] Source does appear to be extended
[Sun Mar 11 19:27:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 19:27:21 2012] XMMSAS src. selection expression = ellipse(26748.133402, 29948.752200, 308.295009, 308.295009, 0.000000, X, Y)
[Sun Mar 11 19:27:21 2012] Writing source region out to fullrun_pn_xmm0500070501_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 11 19:27:21 2012] Extracting stamp from image fullrun_pn_xmm0500070501_pi300-10000_cl_sm2.00.img.gz, (290, 327) - (326, 363)
[Sun Mar 11 19:27:21 2012] XMMSAS bgd. selection expression = annulus(26748.133402, 29948.752200, 513.825015, 1027.650030, X, Y) && !ellipse(28554.518250, 31084.336365, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 11 19:27:21 2012] Writing fullrun_pn_xmm0500070501_pi300-10000_pass1_cl_src1.gif
[Sun Mar 11 19:27:33 2012] Mean detx,y = (1525.05, -1734.88) 
[Sun Mar 11 19:27:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 19:27:56 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 19:27:57 2012] Setting source spectrum file to fullrun_pn_xmm0500070501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 11 19:27:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500070501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 12 00:59:24 2012] Updating aperture counts using extracted products
[Mon Mar 12 00:59:24 2012] Error reading totcts from fullrun_pn_xmm0500070501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 12 00:59:26 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 00:59:26 2012] Using photon index=1.80, rate=0.0204, arf fullrun_pn_xmm0500070501_pi300-10000_pass1_cl_src1.arf
[Mon Mar 12 00:59:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 00:59:26 2012] Updating source flux to 6.3e-14
[Mon Mar 12 01:00:58 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Mon Mar 12 01:02:27 2012] Reading fit data from xmm0500070501/analysis//spectral/fullrun_pn_xmm0500070501_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar 12 01:02:27 2012] Spectral fit parameter nH value = 8.5599e+20
[Mon Mar 12 01:02:27 2012] Spectral fit parameter PhoIndex value = 1.8347
[Mon Mar 12 01:02:27 2012] Failed to get F(0.3-8.0) from xmm0500070501/analysis//spectral/fullrun_pn_xmm0500070501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar 12 01:02:27 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 01:02:27 2012] Using Nh = 8.6e+20, photon index=1.83, rate=0.0204, arf fullrun_pn_xmm0500070501_pi300-10000_pass1_cl_src1.arf
[Mon Mar 12 01:02:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 01:02:27 2012] Updating source flux to 7.6e-14