[Sun Mar 11 15:33:24 2012] Detection parameters:
  Position = (294.3, 314.9) = 12 1 54.21 -18 52 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 490.5 +/- 31.0
  Background counts = 52.8
  Rate = 0.02 +/- 0.001

[Sun Mar 11 15:33:25 2012] Off-axis axis estimate = 1.23'
[Sun Mar 11 16:27:51 2012] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 16:27:51 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Sun Mar 11 16:27:51 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890
[Sun Mar 11 16:27:51 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.05"
[Sun Mar 11 17:30:37 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_src5.ximg exists
[Sun Mar 11 17:30:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_src5.csv
[Sun Mar 11 17:30:38 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Mar 11 17:30:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_src5.csv
[Sun Mar 11 17:30:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 17:30:38 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Mar 11 17:30:38 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Mar 11 17:30:38 2012] Fit fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Mar 11 17:30:53 2012] Spatial fit model total counts = 2371.710000, observed total counts = 2365.000000
[Sun Mar 11 17:30:53 2012] Offset between fit and detection position for source 4 = 2.437603 pixels
[Sun Mar 11 17:30:53 2012] 1784.204000 total counts/ 1188.860000 bgd. counts: snr = 17.266433
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.437603 pixels
  Position = (296.6, 315.7) = 12 1 53.51 -18 52 0.4
  Extent = 14.1 (14.1-28.2)", rotation angle = 0
  Source counts = 595.3 +/- 42.2
  Background counts = 1188.9
  Rate = 0.02 +/- 0.001
[Sun Mar 11 17:30:53 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 17:30:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 17:30:53 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 17:30:53 2012] Source does appear to be extended
[Sun Mar 11 17:30:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 17:30:53 2012] Source is confused with source 3
[Sun Mar 11 18:25:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 18:25:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 11 18:25:34 2012] Initial guess for spatial extent in simple fitting = 14.09"
[Sun Mar 11 18:25:34 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.876
[Sun Mar 11 18:25:34 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.09"
[Sun Mar 11 19:27:05 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_src5.ximg exists
[Sun Mar 11 19:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_src5.csv
[Sun Mar 11 19:27:05 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Mar 11 19:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_src5.csv
[Sun Mar 11 19:27:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 19:27:06 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Mar 11 19:27:06 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Mar 11 19:27:06 2012] Fit fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Mar 11 19:27:15 2012] Warning, spatial fit 5 centroid is now closest to src. 9
[Sun Mar 11 19:27:15 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 19:27:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 19:27:15 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 19:27:15 2012] Source does appear to be extended
[Sun Mar 11 19:27:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 00:18:12 2012] XMMSAS src. selection expression = ellipse(25757.286000, 27420.641800, 845.460024, 845.460024, 0.000000, X, Y)
[Mon Mar 12 00:18:12 2012] Writing source region out to fullrun_mos1_xmm0500070501_pi300-10000_pass1_cl_src4_src.reg
[Mon Mar 12 00:18:12 2012] Extracting stamp from image fullrun_mos1_xmm0500070501_pi300-10000_cl_sm2.00.img.gz, (248, 267) - (345, 364)
[Mon Mar 12 00:18:12 2012] XMMSAS bgd. selection expression = annulus(25757.286000, 27420.641800, 1409.100041, 2818.200081, X, Y) && !ellipse(25588.446800, 26057.893800, 915.624026, 915.624026, 0.000000, X, Y) && !ellipse(24946.386536, 27438.174011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26372.580000, 26932.830000, 338.880010, 338.880010, 0.000000, X, Y) && !ellipse(26166.025400, 27955.780400, 301.904009, 301.904009, 0.000000, X, Y) && !ellipse(26776.317688, 29814.972168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26001.134094, 27277.847412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27196.454834, 27284.662872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26371.335449, 26413.614136, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 12 00:18:12 2012] Writing fullrun_mos1_xmm0500070501_pi300-10000_pass1_cl_src4.gif
[Mon Mar 12 00:19:31 2012] Mean detx,y = (-38.24, -868.36) 
[Mon Mar 12 00:19:33 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 00:19:49 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 00:19:50 2012] Setting source spectrum file to fullrun_mos1_xmm0500070501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Mar 12 00:19:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500070501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Mar 12 00:59:27 2012] Updating aperture counts using extracted products
[Mon Mar 12 00:59:27 2012] Error reading totcts from fullrun_mos1_xmm0500070501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Mar 12 00:59:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 00:59:29 2012] Using photon index=1.80, rate=0.0196, arf fullrun_mos1_xmm0500070501_pi300-10000_pass1_cl_src4.arf
[Mon Mar 12 00:59:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 00:59:29 2012] Updating source flux to 1.9e-13
[Mon Mar 12 00:59:31 2012] Flag c found in src. 4 procflags, skipping spectral fitting