[Sun Mar 11 15:33:24 2012] Detection parameters:
  Position = (295.0, 300.0) = 12 1 54.01 -18 53 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 906.5 +/- 39.1
  Background counts = 53.3
  Rate = 0.03 +/- 0.001

[Sun Mar 11 15:33:25 2012] Off-axis axis estimate = 0.28'
[Sun Mar 11 16:27:51 2012] Using EEF radius (= 6.57 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 16:27:51 2012] Initial guess for spatial extent in simple fitting = 6.57"
[Sun Mar 11 16:27:51 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.990
[Sun Mar 11 16:27:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.57"
[Sun Mar 11 17:30:37 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 11 17:30:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 17:30:37 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 11 17:30:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 17:30:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 17:30:38 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 11 17:30:38 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 11 17:30:38 2012] Fit fullrun_mos1_xmm0500070501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 11 17:30:53 2012] Spatial fit model total counts = 1859.240000, observed total counts = 1854.000000
[Sun Mar 11 17:30:53 2012] Offset between fit and detection position for source 1 = 0.291030 pixels
[Sun Mar 11 17:30:53 2012] 1884.287000 total counts/ 925.496000 bgd. counts: snr = 31.516405
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.291030 pixels
  Position = (294.7, 300.1) = 12 1 54.10 -18 53 8.6
  Extent = 11.4 (10.5-12.5)", rotation angle = 0
  Source counts = 958.8 +/- 43.4
  Background counts = 925.5
  Rate = 0.03 +/- 0.001
[Sun Mar 11 17:30:53 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 17:30:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 17:30:53 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 17:30:53 2012] Source does appear to be extended
[Sun Mar 11 17:30:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 18:25:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 18:25:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 11 18:25:34 2012] Initial guess for spatial extent in simple fitting = 11.45"
[Sun Mar 11 18:25:34 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.918
[Sun Mar 11 18:25:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.45"
[Sun Mar 11 19:27:05 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 11 19:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 19:27:05 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 11 19:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 19:27:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 19:27:05 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 11 19:27:05 2012] fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 11 19:27:05 2012] Fit fullrun_mos1_xmm0500070501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 11 19:27:15 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Sun Mar 11 19:27:15 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 19:27:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 19:27:15 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 19:27:15 2012] Source does appear to be extended
[Sun Mar 11 19:27:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 00:18:12 2012] XMMSAS src. selection expression = ellipse(25588.446800, 26057.893800, 686.718020, 686.718020, 0.000000, X, Y)
[Mon Mar 12 00:18:12 2012] Writing source region out to fullrun_mos1_xmm0500070501_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar 12 00:18:12 2012] Extracting stamp from image fullrun_mos1_xmm0500070501_pi300-10000_cl_sm2.00.img.gz, (255, 261) - (334, 340)
[Mon Mar 12 00:18:12 2012] XMMSAS bgd. selection expression = annulus(25588.446800, 26057.893800, 1144.530033, 2289.060066, X, Y) && !ellipse(24946.386536, 27438.174011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26372.580000, 26932.830000, 338.880010, 338.880010, 0.000000, X, Y) && !ellipse(26166.025400, 27955.780400, 301.904009, 301.904009, 0.000000, X, Y) && !ellipse(25757.286000, 27420.641800, 1127.280032, 1127.280032, 0.000000, X, Y) && !ellipse(26001.134094, 27277.847412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27196.454834, 27284.662872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26371.335449, 26413.614136, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 12 00:18:12 2012] Writing fullrun_mos1_xmm0500070501_pi300-10000_pass1_cl_src1.gif
[Mon Mar 12 00:18:18 2012] Mean detx,y = (-1102.93, -1571.41) 
[Mon Mar 12 00:18:21 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 00:18:33 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 00:18:33 2012] Setting source spectrum file to fullrun_mos1_xmm0500070501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 12 00:18:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500070501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 12 00:59:27 2012] Updating aperture counts using extracted products
[Mon Mar 12 00:59:27 2012] Error reading totcts from fullrun_mos1_xmm0500070501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 12 00:59:28 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 00:59:28 2012] Using photon index=1.80, rate=0.0316, arf fullrun_mos1_xmm0500070501_pi300-10000_pass1_cl_src1.arf
[Mon Mar 12 00:59:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 00:59:28 2012] Updating source flux to 3.2e-13
[Mon Mar 12 01:00:58 2012] Reading fit data from xmm0500070501/analysis//spectral/fullrun_mos1_xmm0500070501_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar 12 01:00:58 2012] Spectral fit parameter nH value = 2.1188e+21
[Mon Mar 12 01:00:58 2012] Spectral fit parameter PhoIndex value = 2.91497
[Mon Mar 12 01:00:58 2012] Failed to get F(0.3-8.0) from xmm0500070501/analysis//spectral/fullrun_mos1_xmm0500070501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar 12 01:00:58 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 01:00:58 2012] Using Nh = 2.1e+21, photon index=2.91, rate=0.0316, arf fullrun_mos1_xmm0500070501_pi300-10000_pass1_cl_src1.arf
[Mon Mar 12 01:00:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 01:00:58 2012] Updating source flux to 2.5e-13