[Tue Jun 19 13:21:10 2012] Detection parameters:
  Position = (346.6, 325.9) = 12 1 35.35 -18 47 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.5 +/- 17.0
  Background counts = 86.4
  Rate = 0.003 +/- 0.0005

[Tue Jun 19 13:21:11 2012] Off-axis axis estimate = 4.02'
[Tue Jun 19 14:59:32 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 14:59:32 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Tue Jun 19 14:59:32 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.050
[Tue Jun 19 14:59:32 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.44"
[Tue Jun 19 15:34:09 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_src15.ximg exists
[Tue Jun 19 15:34:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_src15.csv
[Tue Jun 19 15:34:09 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Jun 19 15:34:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_src15.csv
[Tue Jun 19 15:34:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 15:34:09 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Jun 19 15:34:09 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jun 19 15:34:09 2012] Fit fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Jun 19 15:34:21 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.127512 pixels away
[Tue Jun 19 15:34:21 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 15:34:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 15:34:21 2012] Assessing source extent using major
[Tue Jun 19 15:34:21 2012] Source does appear to be extended
[Tue Jun 19 15:34:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 17:14:39 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 17:14:39 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Tue Jun 19 17:14:39 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.050
[Tue Jun 19 17:14:39 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 8.44"
[Tue Jun 19 18:02:00 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_src15.ximg exists
[Tue Jun 19 18:02:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_src15.csv
[Tue Jun 19 18:02:00 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Jun 19 18:02:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_src15.csv
[Tue Jun 19 18:02:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 18:02:00 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Jun 19 18:02:00 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Jun 19 18:02:00 2012] Fit fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Jun 19 18:02:12 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 62.034183 pixels away
[Tue Jun 19 18:02:12 2012] Spatial fit model total counts = 420.147000, observed total counts = 408.000000
[Tue Jun 19 18:02:12 2012] Offset between fit and detection position for source 6 = 0.155888 pixels
[Tue Jun 19 18:02:12 2012] 412.232300 total counts/ 373.133000 bgd. counts: snr = 2.024124
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.155888 pixels
  Position = (346.6, 326.1) = 12 1 35.37 -18 47 53.5
  Extent = 3.1 (2.3-4.8)", rotation angle = 0
  Source counts = 39.1 +/- 20.3
  Background counts = 373.1
  Rate = 0.001 +/- 0.0006
[Tue Jun 19 18:02:12 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:02:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:02:12 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 18:02:12 2012] Source does appear to be extended
[Tue Jun 19 18:02:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 20:43:05 2012] XMMSAS src. selection expression = ellipse(30102.863600, 28319.382400, 185.680205, 185.680205, 0.000000, X, Y)
[Tue Jun 19 20:43:05 2012] Writing source region out to fullrun_mos2_xmm0500070401_pi300-10000_pass1_cl_src6_src.reg
[Tue Jun 19 20:43:05 2012] Extracting stamp from image fullrun_mos2_xmm0500070401_pi300-10000_cl_sm2.00.img.gz, (336, 315) - (357, 337)
[Tue Jun 19 20:43:05 2012] XMMSAS bgd. selection expression = annulus(30102.863600, 28319.382400, 309.467009, 618.934018, X, Y)
[Tue Jun 19 20:43:05 2012] Writing fullrun_mos2_xmm0500070401_pi300-10000_pass1_cl_src6.gif
[Tue Jun 19 20:47:38 2012] Mean detx,y = (5917.00, -2582.75) 
[Tue Jun 19 20:47:39 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 20:47:45 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 20:47:46 2012] Setting source spectrum file to fullrun_mos2_xmm0500070401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 19 20:47:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500070401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jun 19 20:56:49 2012] Not generating rmf since there are only 39 counts
[Tue Jun 19 20:56:49 2012] rmf not generated due to insufficient counts
[Tue Jun 19 20:58:55 2012] Updating aperture counts using extracted products
[Tue Jun 19 20:58:55 2012] Error reading totcts from fullrun_mos2_xmm0500070401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 19 20:58:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 20:58:55 2012] Using photon index=1.80, rate=0.00123, arf fullrun_mos2_xmm0500070401_pi300-10000_pass1_cl_src6.arf
[Tue Jun 19 20:58:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 20:58:55 2012] Updating source flux to 2.8e-14
[Tue Jun 19 21:00:08 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting