[Tue Jun 19 13:21:10 2012] Detection parameters:
  Position = (286.2, 253.2) = 12 1 53.85 -18 53 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1083.1 +/- 42.9
  Background counts = 93.2
  Rate = 0.03 +/- 0.001

[Tue Jun 19 13:21:11 2012] Off-axis axis estimate = 3.40'
[Tue Jun 19 14:59:32 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 14:59:32 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Tue Jun 19 14:59:32 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.114
[Tue Jun 19 14:59:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.13"
[Tue Jun 19 15:34:08 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 19 15:34:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 15:34:08 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 19 15:34:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 15:34:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 15:34:09 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 19 15:34:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jun 19 15:34:09 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 19 15:34:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jun 19 15:34:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 15:34:21 2012] Source 1 is offset by -7.253458 and 6.645685 pixels which is larger than
2 X fitted extent = 0.934271 x 0.934271, not incorporating fit results
[Tue Jun 19 15:34:21 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 15:34:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 15:34:21 2012] Assessing source extent using major
[Tue Jun 19 15:34:21 2012] Source does appear to be extended
[Tue Jun 19 15:34:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 17:14:39 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 17:14:39 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Tue Jun 19 17:14:39 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.114
[Tue Jun 19 17:14:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.13"
[Tue Jun 19 18:02:00 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 19 18:02:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 18:02:00 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 19 18:02:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 18:02:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 18:02:00 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 19 18:02:00 2012] fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 19 18:02:00 2012] Fit fullrun_mos2_xmm0500070401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 19 18:02:12 2012] Spatial fit model total counts = 2126.970000, observed total counts = 1951.000000
[Tue Jun 19 18:02:12 2012] Offset between fit and detection position for source 1 = 0.606134 pixels
[Tue Jun 19 18:02:12 2012] 2099.926000 total counts/ 1167.530000 bgd. counts: snr = 27.287665
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.606134 pixels
  Position = (285.6, 253.3) = 12 1 54.04 -18 53 10.1
  Extent = 10.2 (9.4-11.1)", rotation angle = 0
  Source counts = 932.4 +/- 45.8
  Background counts = 1167.5
  Rate = 0.03 +/- 0.001
[Tue Jun 19 18:02:12 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:02:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:02:12 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 18:02:12 2012] Source does appear to be extended
[Tue Jun 19 18:02:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 20:43:05 2012] XMMSAS src. selection expression = ellipse(24800.997600, 21987.794800, 613.758018, 613.758018, 0.000000, X, Y)
[Tue Jun 19 20:43:05 2012] Writing source region out to fullrun_mos2_xmm0500070401_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 19 20:43:05 2012] Extracting stamp from image fullrun_mos2_xmm0500070401_pi300-10000_cl_sm2.00.img.gz, (250, 218) - (321, 289)
[Tue Jun 19 20:43:05 2012] XMMSAS bgd. selection expression = annulus(24800.997600, 21987.794800, 1022.930029, 2045.860059, X, Y) && !ellipse(24341.666000, 22710.486000, 842.336024, 842.336024, 0.000000, X, Y) && !ellipse(25340.756622, 23885.912079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25547.280731, 22920.325714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25193.290985, 23276.763397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25474.607269, 22346.730530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26416.616974, 20957.753281, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 19 20:43:05 2012] Writing fullrun_mos2_xmm0500070401_pi300-10000_pass1_cl_src1.gif
[Tue Jun 19 20:43:08 2012] Mean detx,y = (-1114.06, 1717.18) 
[Tue Jun 19 20:43:09 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 20:43:17 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 20:43:18 2012] Setting source spectrum file to fullrun_mos2_xmm0500070401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 19 20:43:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500070401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 19 20:58:55 2012] Updating aperture counts using extracted products
[Tue Jun 19 20:58:55 2012] Error reading totcts from fullrun_mos2_xmm0500070401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 19 20:58:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 20:58:55 2012] Using photon index=1.80, rate=0.0294, arf fullrun_mos2_xmm0500070401_pi300-10000_pass1_cl_src1.arf
[Tue Jun 19 20:58:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 20:58:55 2012] Updating source flux to 3e-13
[Tue Jun 19 21:00:08 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Tue Jun 19 21:00:20 2012] Reading fit data from xmm0500070401/analysis//spectral/fullrun_mos2_xmm0500070401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 19 21:00:20 2012] Spectral fit parameter nH value = 2.81318e+21
[Tue Jun 19 21:00:20 2012] Spectral fit parameter PhoIndex value = 3.139
[Tue Jun 19 21:00:20 2012] Failed to get F(0.3-8.0) from xmm0500070401/analysis//spectral/fullrun_mos2_xmm0500070401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 19 21:00:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 21:00:20 2012] Using Nh = 2.8e+21, photon index=3.14, rate=0.0294, arf fullrun_mos2_xmm0500070401_pi300-10000_pass1_cl_src1.arf
[Tue Jun 19 21:00:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 21:00:20 2012] Updating source flux to 2.3e-13