[Fri Aug 31 16:28:32 2012] Detection parameters:
  Position = (300.7, 313.9) = 12 1 52.89 -18 52 7.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 377.5 +/- 25.4
  Background counts = 11.6
  Rate = 0.02 +/- 0.001

[Fri Aug 31 16:28:32 2012] Off-axis axis estimate = 1.14'
[Fri Aug 31 18:22:27 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 18:22:27 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Fri Aug 31 18:22:27 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.900
[Fri Aug 31 18:22:27 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.00"
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src4.ximg exists
[Fri Aug 31 19:12:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src4.csv
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Aug 31 19:12:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src4.csv
[Fri Aug 31 19:12:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Aug 31 19:12:20 2012] Fit fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Aug 31 19:12:35 2012] Warning, spatial fit 4 centroid is now closest to src. 2
[Fri Aug 31 19:12:35 2012] Spatial fit model total counts = 961.578000, observed total counts = 941.000000
[Fri Aug 31 19:12:35 2012] Offset between fit and detection position for source 4 = 2.985046 pixels
[Fri Aug 31 19:12:35 2012] Warning, changing simple spatial fit ID from 4 to 6
[Fri Aug 31 19:12:35 2012] 923.082000 total counts/ 722.886000 bgd. counts: snr = 7.445956
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.985046 pixels
  Position = (298.1, 315.3) = 12 1 53.70 -18 52 1.5
  Extent = 9.9 (7.5-13.1)", rotation angle = 0
  Source counts = 200.2 +/- 30.4
  Background counts = 722.9
  Rate = 0.008 +/- 0.001
[Fri Aug 31 19:12:35 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 19:12:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 19:12:35 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 19:12:35 2012] Source does appear to be extended
[Fri Aug 31 19:12:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 20:46:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 20:46:35 2012] Initial guess for spatial extent in simple fitting = 9.90"
[Fri Aug 31 20:46:35 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.973
[Fri Aug 31 20:46:35 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.90"
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src4.ximg exists
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Aug 31 21:31:58 2012] Fit fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src4 appears to have run properly
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Aug 31 21:31:58 2012] Fit fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Aug 31 21:32:11 2012] Spatial fit model total counts = 1675.160000, observed total counts = 1662.000000
[Fri Aug 31 21:32:11 2012] Offset between fit and detection position for source 4 = 8.993096 pixels
[Fri Aug 31 21:32:11 2012] 1671.549000 total counts/ 1024.550000 bgd. counts: snr = 20.213291
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 8.993096 pixels
  Position = (289.3, 313.3) = 12 1 56.39 -18 52 10.3
  Extent = 19.8 (19.7-39.6)", rotation angle = 0
  Source counts = 647.0 +/- 40.9
  Background counts = 1024.5
  Rate = 0.03 +/- 0.002
[Fri Aug 31 21:32:11 2012] Source 4 is offset by -1.747517 and 6.968989 pixels which is larger than
2 X fitted extent = 3.954239 x 3.954239, not incorporating fit results
[Fri Aug 31 21:32:11 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:32:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:32:11 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 21:32:11 2012] Source does appear to be extended
[Fri Aug 31 21:32:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 21:32:11 2012] Source is confused with source 3
[Fri Aug 31 21:54:15 2012] XMMSAS src. selection expression = ellipse(25121.134000, 27207.350000, 1187.976034, 1187.976034, 0.000000, X, Y)
[Fri Aug 31 21:54:15 2012] Writing source region out to fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src4_src.reg
[Fri Aug 31 21:54:15 2012] Extracting stamp from image fullrun_mos2_xmm0500070301_pi300-10000_cl_sm2.00.img.gz, (221, 245) - (358, 382)
[Fri Aug 31 21:54:15 2012] XMMSAS bgd. selection expression = annulus(25121.134000, 27207.350000, 1979.960057, 3959.920114, X, Y) && !ellipse(25734.690700, 25997.524620, 832.240024, 832.240024, 0.000000, X, Y) && !ellipse(25039.531600, 27419.763800, 372.972011, 372.972011, 0.000000, X, Y) && !ellipse(26527.581000, 26876.684600, 405.908812, 405.908812, 0.000000, X, Y) && !ellipse(26889.668854, 29893.300842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26434.620000, 28304.230000, 1145.104033, 1145.104033, 0.000000, X, Y) && !ellipse(28686.320716, 31027.743830, 460.243259, 316.885872, 41.364179, X, Y) && !ellipse(21856.017240, 26374.487200, 294.027208, 294.027208, 0.000000, X, Y) && !ellipse(25445.622314, 30612.442078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27346.554920, 24914.436400, 627.484818, 627.484818, 0.000000, X, Y) && !ellipse(26460.831177, 25359.517059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25742.045715, 25070.960510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24388.479919, 26509.009338, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 21:54:15 2012] Writing fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src4.gif
[Fri Aug 31 21:54:38 2012] Mean detx,y = (1184.67, -336.89) 
[Fri Aug 31 21:54:38 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 21:54:45 2012] grppha failed
[Fri Aug 31 21:54:45 2012] Setting source spectrum file to fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src4_src.pi.gz
[Fri Aug 31 21:54:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Aug 31 21:59:05 2012] Updating aperture counts using extracted products
[Fri Aug 31 21:59:05 2012] Error reading totcts from fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src4_src.pi.gz
[Fri Aug 31 21:59:06 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 21:59:07 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Fri Aug 31 21:59:07 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Fri Aug 31 21:59:07 2012] Source 4 has no response, skipping
[Fri Aug 31 21:59:09 2012] xmm0500070301/analysis//spectral/fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete