[Fri Aug 31 16:28:32 2012] Detection parameters:
  Position = (322.2, 133.7) = 12 1 46.29 -19 5 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.6 +/- 12.9
  Background counts = 8.0
  Rate = 0.004 +/- 0.0005

[Fri Aug 31 16:28:32 2012] Off-axis axis estimate = 12.07'
[Fri Aug 31 18:22:27 2012] Using EEF radius (= 12.46 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 18:22:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 31 18:22:27 2012] Initial guess for spatial extent in simple fitting = 12.46"
[Fri Aug 31 18:22:27 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.082
[Fri Aug 31 18:22:27 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 12.46"
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src13.ximg exists
[Fri Aug 31 19:12:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src13.csv
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Aug 31 19:12:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src13.csv
[Fri Aug 31 19:12:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Aug 31 19:12:20 2012] Fit fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Aug 31 19:12:35 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 12.915927 pixels away
[Fri Aug 31 19:12:35 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 19:12:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 19:12:35 2012] Assessing source extent using major
[Fri Aug 31 19:12:35 2012] Source does appear to be extended
[Fri Aug 31 19:12:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 20:46:35 2012] Using EEF radius (= 12.46 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 20:46:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 31 20:46:35 2012] Initial guess for spatial extent in simple fitting = 12.46"
[Fri Aug 31 20:46:35 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.082
[Fri Aug 31 20:46:35 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 12.46"
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src13.ximg exists
[Fri Aug 31 21:31:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src13.csv
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Aug 31 21:31:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src13.csv
[Fri Aug 31 21:31:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Aug 31 21:31:58 2012] Fit fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Aug 31 21:32:11 2012] Spatial fit model total counts = 180.882000, observed total counts = 180.000000
[Fri Aug 31 21:32:11 2012] Offset between fit and detection position for source 35 = 0.120531 pixels
[Fri Aug 31 21:32:11 2012] 181.967100 total counts/ 117.199000 bgd. counts: snr = 5.982727
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.120531 pixels
  Position = (322.2, 133.5) = 12 1 46.30 -19 5 12.2
  Extent = 4.3 (3.6-5.3)", rotation angle = 0
  Source counts = 64.8 +/- 13.5
  Background counts = 117.2
  Rate = 0.003 +/- 0.0005
[Fri Aug 31 21:32:11 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:32:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:32:11 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 21:32:11 2012] Source does appear to be extended
[Fri Aug 31 21:32:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 21:54:15 2012] XMMSAS src. selection expression = ellipse(27982.440800, 11568.889000, 260.550007, 260.550007, 0.000000, X, Y)
[Fri Aug 31 21:54:15 2012] Writing source region out to fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src35_src.reg
[Fri Aug 31 21:54:15 2012] Extracting stamp from image fullrun_mos2_xmm0500070301_pi300-10000_cl_sm2.00.img.gz, (307, 119) - (337, 149)
[Fri Aug 31 21:54:15 2012] XMMSAS bgd. selection expression = annulus(27982.440800, 11568.889000, 434.250012, 868.500025, X, Y)
[Fri Aug 31 21:54:15 2012] Writing fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src35.gif
[Fri Aug 31 21:55:43 2012] Mean detx,y = (4848.83, -15655.03) 
[Fri Aug 31 21:55:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 21:55:48 2012] grppha failed
[Fri Aug 31 21:55:48 2012] Setting source spectrum file to fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src35_src.pi.gz
[Fri Aug 31 21:55:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Fri Aug 31 21:58:28 2012] Not generating rmf since there are only 64 counts
[Fri Aug 31 21:58:28 2012] rmf not generated due to insufficient counts
[Fri Aug 31 21:59:05 2012] Updating aperture counts using extracted products
[Fri Aug 31 21:59:05 2012] Error reading totcts from fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src35_src.pi.gz
[Fri Aug 31 21:59:06 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 21:59:07 2012] Source 35 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 31 21:59:09 2012] xmm0500070301/analysis//spectral/fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete