[Fri Aug 31 16:28:32 2012] Detection parameters:
  Position = (296.4, 288.7) = 12 1 54.20 -18 53 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.3 +/- 9.3
  Background counts = 10.8
  Rate = 0.001 +/- 0.0004

[Fri Aug 31 16:28:32 2012] Off-axis axis estimate = 0.72'
[Fri Aug 31 18:22:27 2012] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 18:22:27 2012] Initial guess for spatial extent in simple fitting = 6.79"
[Fri Aug 31 18:22:27 2012] source mask rpix=1.6, npix_max = 16, mask sum = 20, frac = 1.178
[Fri Aug 31 18:22:27 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 6.79"
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src33.ximg exists
[Fri Aug 31 19:12:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src33.csv
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Aug 31 19:12:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src33.csv
[Fri Aug 31 19:12:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Aug 31 19:12:20 2012] Fit fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Fri Aug 31 19:12:35 2012] Source 24 is offset by -0.041663 and -7.512224 pixels which is larger than
2 X fitted extent = 4.884000 x 4.884000, not incorporating fit results
[Fri Aug 31 19:12:35 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 19:12:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 19:12:35 2012] Assessing source extent using major
[Fri Aug 31 19:12:35 2012] Source does appear to be extended
[Fri Aug 31 19:12:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 20:46:35 2012] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 20:46:35 2012] Initial guess for spatial extent in simple fitting = 6.79"
[Fri Aug 31 20:46:35 2012] source mask rpix=1.6, npix_max = 16, mask sum = 20, frac = 1.178
[Fri Aug 31 20:46:35 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 6.79"
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src30.ximg exists
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Aug 31 21:31:58 2012] Fit fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src30 appears to have run properly
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Aug 31 21:31:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Aug 31 21:31:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri Aug 31 21:31:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 21:32:11 2012] Warning, spatial fit 30 centroid is now closest to src. 26
[Fri Aug 31 21:32:11 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:32:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:32:11 2012] Assessing source extent using major
[Fri Aug 31 21:32:11 2012] Source does appear to be extended
[Fri Aug 31 21:32:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 21:54:15 2012] XMMSAS src. selection expression = ellipse(25742.045715, 25070.960510, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 31 21:54:15 2012] Writing source region out to fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src24_src.reg
[Fri Aug 31 21:54:15 2012] Extracting stamp from image fullrun_mos2_xmm0500070301_pi300-10000_cl_sm2.00.img.gz, (259, 251) - (334, 326)
[Fri Aug 31 21:54:15 2012] XMMSAS bgd. selection expression = annulus(25742.045715, 25070.960510, 1087.500000, 2175.000000, X, Y) && !ellipse(25734.690700, 25997.524620, 832.240024, 832.240024, 0.000000, X, Y) && !ellipse(25039.531600, 27419.763800, 372.972011, 372.972011, 0.000000, X, Y) && !ellipse(26527.581000, 26876.684600, 405.908812, 405.908812, 0.000000, X, Y) && !ellipse(25121.134000, 27207.350000, 1583.968046, 1583.968046, 0.000000, X, Y) && !ellipse(26434.620000, 28304.230000, 1145.104033, 1145.104033, 0.000000, X, Y) && !ellipse(26963.624400, 22793.602800, 378.139211, 378.139211, 0.000000, X, Y) && !ellipse(27346.554920, 24914.436400, 627.484818, 627.484818, 0.000000, X, Y) && !ellipse(26460.831177, 25359.517059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24388.479919, 26509.009338, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 21:54:15 2012] Writing fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src24.gif
[Fri Aug 31 21:58:06 2012] Mean detx,y = (1571.87, -2197.75) 
[Fri Aug 31 21:58:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 21:58:14 2012] grppha failed
[Fri Aug 31 21:58:14 2012] Setting source spectrum file to fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src24_src.pi.gz
[Fri Aug 31 21:58:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Fri Aug 31 21:58:29 2012] Not generating rmf since there are only 33 counts
[Fri Aug 31 21:58:29 2012] rmf not generated due to insufficient counts
[Fri Aug 31 21:59:06 2012] Updating aperture counts using extracted products
[Fri Aug 31 21:59:06 2012] Error reading totcts from fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src24_src.pi.gz
[Fri Aug 31 21:59:06 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 21:59:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 21:59:09 2012] xmm0500070301/analysis//spectral/fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete