[Fri Aug 31 16:28:32 2012] Detection parameters:
  Position = (293.0, 352.4) = 12 1 55.24 -18 49 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.0 +/- 9.0
  Background counts = 10.9
  Rate = 0.002 +/- 0.0004

[Fri Aug 31 16:28:32 2012] Off-axis axis estimate = 3.93'
[Fri Aug 31 18:22:27 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 18:22:27 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Fri Aug 31 18:22:27 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.847
[Fri Aug 31 18:22:27 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 8.40"
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src26.ximg exists
[Fri Aug 31 19:12:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src26.csv
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src26_1.ximg exists
[Fri Aug 31 19:12:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src26.csv
[Fri Aug 31 19:12:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Fri Aug 31 19:12:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Aug 31 19:12:20 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Fri Aug 31 19:12:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Aug 31 19:12:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 19:12:35 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 11.307340 pixels away
[Fri Aug 31 19:12:35 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 19:12:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 19:12:35 2012] Assessing source extent using major
[Fri Aug 31 19:12:35 2012] Source does appear to be extended
[Fri Aug 31 19:12:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 20:46:35 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 20:46:35 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Fri Aug 31 20:46:35 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.847
[Fri Aug 31 20:46:35 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 8.40"
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src24.ximg exists
[Fri Aug 31 21:31:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src24.csv
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri Aug 31 21:31:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src24.csv
[Fri Aug 31 21:31:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri Aug 31 21:31:58 2012] fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri Aug 31 21:31:58 2012] Fit fullrun_mos2_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Fri Aug 31 21:32:11 2012] Spatial fit model total counts = 133.211000, observed total counts = 121.000000
[Fri Aug 31 21:32:11 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 31 21:32:11 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:32:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:32:11 2012] Assessing source extent using major
[Fri Aug 31 21:32:11 2012] Source does appear to be extended
[Fri Aug 31 21:32:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 21:54:15 2012] XMMSAS src. selection expression = ellipse(25445.622314, 30612.442078, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 31 21:54:15 2012] Writing source region out to fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src12_src.reg
[Fri Aug 31 21:54:15 2012] Extracting stamp from image fullrun_mos2_xmm0500070301_pi300-10000_cl_sm2.00.img.gz, (256, 315) - (331, 390)
[Fri Aug 31 21:54:15 2012] XMMSAS bgd. selection expression = annulus(25445.622314, 30612.442078, 1087.500000, 2175.000000, X, Y) && !ellipse(25121.134000, 27207.350000, 1583.968046, 1583.968046, 0.000000, X, Y) && !ellipse(26889.668854, 29893.300842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26434.620000, 28304.230000, 1145.104033, 1145.104033, 0.000000, X, Y)
[Fri Aug 31 21:54:15 2012] Writing fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src12.gif
[Fri Aug 31 21:57:18 2012] Mean detx,y = (-145.66, 2900.31) 
[Fri Aug 31 21:57:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 21:57:24 2012] grppha failed
[Fri Aug 31 21:57:24 2012] Setting source spectrum file to fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src12_src.pi.gz
[Fri Aug 31 21:57:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Aug 31 21:58:29 2012] Not generating rmf since there are only 42 counts
[Fri Aug 31 21:58:29 2012] rmf not generated due to insufficient counts
[Fri Aug 31 21:59:05 2012] Updating aperture counts using extracted products
[Fri Aug 31 21:59:05 2012] Error reading totcts from fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src12_src.pi.gz
[Fri Aug 31 21:59:06 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 21:59:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 21:59:09 2012] xmm0500070301/analysis//spectral/fullrun_mos2_xmm0500070301_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete