[Fri Aug 31 16:28:15 2012] Detection parameters:
  Position = (221.9, 302.0) = 12 2 17.06 -18 52 58.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.7 +/- 9.8
  Background counts = 9.0
  Rate = 0.004 +/- 0.0006

[Fri Aug 31 16:28:15 2012] Off-axis axis estimate = 5.56'
[Fri Aug 31 17:35:44 2012] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 17:35:44 2012] Initial guess for spatial extent in simple fitting = 9.21"
[Fri Aug 31 17:35:44 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.095
[Fri Aug 31 17:35:44 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 9.21"
[Fri Aug 31 18:22:26 2012] fullrun_mos1_xmm0500070301_pi300-10000_cl_pass0_src14.ximg exists
[Fri Aug 31 18:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070301_pi300-10000_cl_pass0_src14.csv
[Fri Aug 31 18:22:26 2012] fullrun_mos1_xmm0500070301_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Aug 31 18:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070301_pi300-10000_cl_pass0_src14.csv
[Fri Aug 31 18:22:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500070301_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500070301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 18:22:26 2012] fullrun_mos1_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Aug 31 18:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri Aug 31 18:22:26 2012] fullrun_mos1_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Aug 31 18:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri Aug 31 18:22:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500070301_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 19:12:31 2012] Spatial fit model total counts = 129.890000, observed total counts = 116.000000
[Fri Aug 31 19:12:31 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 31 19:12:31 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 19:12:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 19:12:31 2012] Assessing source extent using major
[Fri Aug 31 19:12:31 2012] Source does appear to be extended
[Fri Aug 31 19:12:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 20:02:00 2012] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 20:02:00 2012] Initial guess for spatial extent in simple fitting = 9.21"
[Fri Aug 31 20:02:00 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.095
[Fri Aug 31 20:02:00 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.21"
[Fri Aug 31 20:46:35 2012] fullrun_mos1_xmm0500070301_pi300-10000_cl_pass1_src13.ximg exists
[Fri Aug 31 20:46:35 2012] fullrun_mos1_xmm0500070301_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Aug 31 20:46:35 2012] Fit fullrun_mos1_xmm0500070301_pi300-10000_cl_pass1_src13 appears to have run properly
[Fri Aug 31 20:46:35 2012] fullrun_mos1_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Aug 31 20:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Aug 31 20:46:35 2012] fullrun_mos1_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Aug 31 20:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Aug 31 20:46:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500070301_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 21:32:07 2012] Spatial fit model total counts = 117.696000, observed total counts = 116.000000
[Fri Aug 31 21:32:07 2012] Offset between fit and detection position for source 26 = 0.098376 pixels
[Fri Aug 31 21:32:07 2012] 113.137400 total counts/ 65.351300 bgd. counts: snr = 5.911184
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.098376 pixels
  Position = (221.9, 301.9) = 12 2 17.04 -18 52 59.7
  Extent = 7.5" x 5.0", rotation angle = 104
  Source counts = 47.8 +/- 10.6
  Background counts = 65.4
  Rate = 0.002 +/- 0.0004
[Fri Aug 31 21:32:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:32:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:32:07 2012] Assessing source extent using major
[Fri Aug 31 21:32:07 2012] Source does appear to be extended
[Fri Aug 31 21:32:07 2012] Computing asymmetry using major and minor axis, asym = 1.49
[Fri Aug 31 21:49:42 2012] XMMSAS src. selection expression = ellipse(19259.268985, 26217.576751, 448.432166, 301.375099, 104.358326, X, Y)
[Fri Aug 31 21:49:42 2012] Writing source region out to fullrun_mos1_xmm0500070301_pi300-10000_pass1_cl_src26_src.reg
[Fri Aug 31 21:49:42 2012] Extracting stamp from image fullrun_mos1_xmm0500070301_pi300-10000_cl_sm2.00.img.gz, (196, 276) - (248, 328)
[Fri Aug 31 21:49:42 2012] XMMSAS bgd. selection expression = annulus(19259.268985, 26217.576751, 747.386944, 1494.773887, X, Y)
[Fri Aug 31 21:49:42 2012] Writing fullrun_mos1_xmm0500070301_pi300-10000_pass1_cl_src26.gif
[Fri Aug 31 21:51:47 2012] Mean detx,y = (1478.61, -7400.98) 
[Fri Aug 31 21:51:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 21:51:56 2012] grppha failed
[Fri Aug 31 21:51:56 2012] Setting source spectrum file to fullrun_mos1_xmm0500070301_pi300-10000_pass1_cl_src26_src.pi.gz
[Fri Aug 31 21:51:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500070301_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri Aug 31 21:54:14 2012] Not generating rmf since there are only 47 counts
[Fri Aug 31 21:54:14 2012] rmf not generated due to insufficient counts
[Fri Aug 31 21:59:05 2012] Updating aperture counts using extracted products
[Fri Aug 31 21:59:05 2012] Error reading totcts from fullrun_mos1_xmm0500070301_pi300-10000_pass1_cl_src26_src.pi.gz
[Fri Aug 31 21:59:05 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 21:59:06 2012] Flag p found in src. 26 procflags, skipping spectral fitting
[Fri Aug 31 21:59:06 2012] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 31 21:59:07 2012] xmm0500070301/analysis//spectral/fullrun_mos1_xmm0500070301_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete