[Fri Dec 30 07:26:53 2011] Detection parameters:
  Position = (189.1, 456.2) = 21 26 55.02 -44 0 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.4 +/- 19.5
  Background counts = 68.8
  Rate = 0.005 +/- 0.0005

[Fri Dec 30 07:26:57 2011] Off-axis axis estimate = 13.91'
[Fri Dec 30 07:34:31 2011] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 07:34:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 07:34:31 2011] Initial guess for spatial extent in simple fitting = 13.39"
[Fri Dec 30 07:34:31 2011] source mask rpix=3.1, npix_max = 51, mask sum = 33, frac = 0.645
[Fri Dec 30 07:34:31 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 13.39"
[Fri Dec 30 09:28:58 2011] fullrun_pn_xmm0500050101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Dec 30 09:28:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500050101_pi300-10000_cl_pass0_src4.csv
[Fri Dec 30 09:28:58 2011] fullrun_pn_xmm0500050101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Dec 30 09:28:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500050101_pi300-10000_cl_pass0_src4.csv
[Fri Dec 30 09:28:58 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500050101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500050101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:28:58 2011] fullrun_pn_xmm0500050101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Dec 30 09:28:58 2011] fullrun_pn_xmm0500050101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Dec 30 09:28:58 2011] Fit fullrun_pn_xmm0500050101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Dec 30 12:13:24 2011] Warning, spatial fit 4 centroid is now closest to src. 20
[Fri Dec 30 12:13:24 2011] Spatial fit model total counts = 1064.460000, observed total counts = 1064.000000
[Fri Dec 30 12:13:24 2011] Offset between fit and detection position for source 5 = 2.815637 pixels
[Fri Dec 30 12:13:24 2011] Warning, changing simple spatial fit ID from 4 to 9
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.815637 pixels
  Position = (186.6, 455.0) = 21 26 56.05 -44 1 7.1
  Extent = 22.3 (18.7-25.4)", rotation angle = 0
  Source counts = 884.3 +/- 29.7
  Background counts = 0.0
  Rate = 0.02 +/- 0.0008
 Deleting source due to low signal-to-noise ratio