[Fri Dec 30 07:28:40 2011] Detection parameters:
  Position = (435.3, 211.8) = 21 25 15.46 -44 18 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 385.2 +/- 24.0
  Background counts = 20.2
  Rate = 0.009 +/- 0.0006

[Fri Dec 30 07:28:41 2011] Off-axis axis estimate = 11.74'
[Fri Dec 30 10:38:53 2011] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 10:38:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 10:38:53 2011] Initial guess for spatial extent in simple fitting = 12.30"
[Fri Dec 30 10:38:53 2011] source mask rpix=2.8, npix_max = 44, mask sum = 31, frac = 0.700
[Fri Dec 30 10:38:53 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 12.30"
[Fri Dec 30 12:13:05 2011] fullrun_mos2_xmm0500050101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 30 12:13:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500050101_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 12:13:05 2011] fullrun_mos2_xmm0500050101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 30 12:13:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500050101_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 12:13:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500050101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500050101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 12:13:06 2011] fullrun_mos2_xmm0500050101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 30 12:13:06 2011] fullrun_mos2_xmm0500050101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 30 12:13:06 2011] Fit fullrun_mos2_xmm0500050101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 30 12:13:43 2011] Spatial fit model total counts = 689.999000, observed total counts = 690.000000
[Fri Dec 30 12:13:43 2011] Offset between fit and detection position for source 1 = 0.482597 pixels
[Fri Dec 30 12:13:43 2011] 693.730000 total counts/ 434.571000 bgd. counts: snr = 12.431855
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.482597 pixels
  Position = (435.3, 211.3) = 21 25 15.45 -44 18 46.6
  Extent = 5.0 (4.4-5.4)", rotation angle = 0
  Source counts = 259.2 +/- 26.3
  Background counts = 434.6
  Rate = 0.006 +/- 0.0006
[Fri Dec 30 12:13:43 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 12:13:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 12:13:43 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 12:13:43 2011] Source does appear to be extended
[Fri Dec 30 12:13:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 15:25:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 15:25:59 2011] Initial guess for spatial extent in simple fitting = 4.95"
[Fri Dec 30 15:25:59 2011] source mask rpix=1.1, npix_max = 10, mask sum = 7, frac = 0.652
[Fri Dec 30 15:25:59 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.95"
[Fri Dec 30 17:06:42 2011] fullrun_mos2_xmm0500050101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 30 17:06:42 2011] fullrun_mos2_xmm0500050101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 30 17:06:42 2011] Fit fullrun_mos2_xmm0500050101_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Dec 30 17:06:42 2011] fullrun_mos2_xmm0500050101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 30 17:06:42 2011] fullrun_mos2_xmm0500050101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 30 17:06:42 2011] Fit fullrun_mos2_xmm0500050101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 30 17:07:19 2011] Spatial fit model total counts = 475.000000, observed total counts = 475.000000
[Fri Dec 30 17:07:19 2011] Offset between fit and detection position for source 1 = 0.023469 pixels
[Fri Dec 30 17:07:19 2011] 478.555000 total counts/ 223.292000 bgd. counts: snr = 17.082494
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.023469 pixels
  Position = (435.3, 211.3) = 21 25 15.45 -44 18 46.7
  Extent = 4.8 (4.3-5.3)", rotation angle = 0
  Source counts = 255.3 +/- 21.9
  Background counts = 223.3
  Rate = 0.006 +/- 0.0005
[Fri Dec 30 17:07:19 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:07:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:07:19 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 17:07:19 2011] Source does appear to be extended
[Fri Dec 30 17:07:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 20:29:37 2011] XMMSAS src. selection expression = ellipse(37825.725400, 18336.374400, 290.695208, 290.695208, 0.000000, X, Y)
[Fri Dec 30 20:29:37 2011] Writing source region out to fullrun_mos2_xmm0500050101_pi300-10000_pass1_cl_src1_src.reg
[Fri Dec 30 20:29:37 2011] Extracting stamp from image fullrun_mos2_xmm0500050101_pi300-10000_cl_sm2.00.img.gz, (419, 195) - (452, 228)
[Fri Dec 30 20:29:37 2011] XMMSAS bgd. selection expression = annulus(37825.725400, 18336.374400, 484.492014, 968.984028, X, Y)
[Fri Dec 30 20:29:37 2011] Writing fullrun_mos2_xmm0500050101_pi300-10000_pass1_cl_src1.gif
[Fri Dec 30 20:29:43 2011] Mean detx,y = (-12072.34, -6443.72) 
[Fri Dec 30 20:29:45 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 20:30:03 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 20:30:04 2011] Setting source spectrum file to fullrun_mos2_xmm0500050101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 30 20:30:04 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0500050101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Dec 30 21:46:12 2011] Updating aperture counts using extracted products
[Fri Dec 30 21:46:12 2011] Error reading totcts from fullrun_mos2_xmm0500050101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 30 21:46:14 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 21:46:14 2011] Using photon index=1.80, rate=0.00604, arf fullrun_mos2_xmm0500050101_pi300-10000_pass1_cl_src1.arf
[Fri Dec 30 21:46:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 21:46:14 2011] Updating source flux to 1.9e-13
[Fri Dec 30 21:49:33 2011] Reading fit data from xmm0500050101/analysis//spectral/fullrun_mos2_xmm0500050101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Dec 30 21:49:33 2011] Spectral fit parameter nH value = 3.94728e+13
[Fri Dec 30 21:49:33 2011] Spectral fit parameter PhoIndex value = 1.64976
[Fri Dec 30 21:49:33 2011] Failed to get F(0.3-8.0) from xmm0500050101/analysis//spectral/fullrun_mos2_xmm0500050101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Dec 30 21:49:33 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 21:49:33 2011] Using Nh = 3.9e+13, photon index=1.65, rate=0.00604, arf fullrun_mos2_xmm0500050101_pi300-10000_pass1_cl_src1.arf
[Fri Dec 30 21:49:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 21:49:33 2011] Updating source flux to 2.1e-13