[Fri Dec 30 07:27:42 2011] Detection parameters:
  Position = (258.1, 285.3) = 21 26 27.24 -44 13 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.8 +/- 14.4
  Background counts = 22.3
  Rate = 0.004 +/- 0.0005

[Fri Dec 30 07:27:42 2011] Off-axis axis estimate = 3.07'
[Fri Dec 30 09:28:59 2011] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 09:28:59 2011] Initial guess for spatial extent in simple fitting = 7.97"
[Fri Dec 30 09:28:59 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.920
[Fri Dec 30 09:28:59 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 7.97"
[Fri Dec 30 10:38:52 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_src11.ximg exists
[Fri Dec 30 10:38:52 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_src11.csv
[Fri Dec 30 10:38:52 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Dec 30 10:38:52 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_src11.csv
[Fri Dec 30 10:38:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 10:38:52 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Dec 30 10:38:52 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Dec 30 10:38:52 2011] Fit fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Dec 30 12:13:32 2011] Spatial fit model total counts = 462.143000, observed total counts = 462.000000
[Fri Dec 30 12:13:32 2011] Offset between fit and detection position for source 23 = 0.296145 pixels
[Fri Dec 30 12:13:32 2011] Warning, changing simple spatial fit ID from 11 to 5
[Fri Dec 30 12:13:32 2011] 460.895400 total counts/ 412.338000 bgd. counts: snr = 2.391271
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.296145 pixels
  Position = (258.2, 285.6) = 21 26 27.23 -44 13 24.4
  Extent = 3.6" x 2.4", rotation angle = 0
  Source counts = 48.6 +/- 21.5
  Background counts = 412.3
  Rate = 0.001 +/- 0.0005
[Fri Dec 30 12:13:32 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 12:13:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 12:13:32 2011] Assessing source extent using major
[Fri Dec 30 12:13:32 2011] Source does appear to be extended
[Fri Dec 30 12:13:32 2011] Computing asymmetry using major and minor axis, asym = 1.48
[Fri Dec 30 14:16:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 14:16:44 2011] Initial guess for spatial extent in simple fitting = 2.98"
[Fri Dec 30 14:16:44 2011] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.070
[Fri Dec 30 14:16:44 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 2.98"
[Fri Dec 30 15:25:59 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_src11.ximg exists
[Fri Dec 30 15:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_src11.csv
[Fri Dec 30 15:25:59 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Dec 30 15:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_src11.csv
[Fri Dec 30 15:25:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 15:25:59 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Dec 30 15:25:59 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Dec 30 15:25:59 2011] Fit fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Dec 30 17:07:08 2011] Spatial fit model total counts = 390.250000, observed total counts = 390.000000
[Fri Dec 30 17:07:08 2011] Offset between fit and detection position for source 23 = 0.228527 pixels
[Fri Dec 30 17:07:08 2011] 404.835400 total counts/ 341.680000 bgd. counts: snr = 3.416652
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.228527 pixels
  Position = (258.1, 285.4) = 21 26 27.26 -44 13 25.3
  Extent = 3.5 (2.9-4.3)", rotation angle = 0
  Source counts = 63.2 +/- 20.1
  Background counts = 341.7
  Rate = 0.001 +/- 0.0005
[Fri Dec 30 17:07:08 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:07:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:07:08 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 17:07:08 2011] Source does appear to be extended
[Fri Dec 30 17:07:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 19:47:03 2011] XMMSAS src. selection expression = ellipse(22405.222120, 24779.749000, 210.888006, 210.888006, 0.000000, X, Y)
[Fri Dec 30 19:47:03 2011] Writing source region out to fullrun_mos1_xmm0500050101_pi300-10000_pass1_cl_src23_src.reg
[Fri Dec 30 19:47:03 2011] Extracting stamp from image fullrun_mos1_xmm0500050101_pi300-10000_cl_sm2.00.img.gz, (246, 273) - (270, 298)
[Fri Dec 30 19:47:03 2011] XMMSAS bgd. selection expression = annulus(22405.222120, 24779.749000, 351.480010, 702.960020, X, Y) && !ellipse(23034.746000, 25355.394000, 280.593608, 280.593608, 0.000000, X, Y)
[Fri Dec 30 19:47:03 2011] Writing fullrun_mos1_xmm0500050101_pi300-10000_pass1_cl_src23.gif
[Fri Dec 30 19:52:08 2011] Mean detx,y = (-3259.76, -4558.08) 
[Fri Dec 30 19:52:12 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 19:52:25 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 19:52:26 2011] Setting source spectrum file to fullrun_mos1_xmm0500050101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Dec 30 19:52:26 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0500050101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Dec 30 20:28:07 2011] Not generating rmf since there are only 63 counts
[Fri Dec 30 20:28:07 2011] rmf not generated due to insufficient counts
[Fri Dec 30 21:46:10 2011] Updating aperture counts using extracted products
[Fri Dec 30 21:46:10 2011] Error reading totcts from fullrun_mos1_xmm0500050101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Dec 30 21:46:11 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 21:46:11 2011] Using photon index=1.80, rate=0.0015, arf fullrun_mos1_xmm0500050101_pi300-10000_pass1_cl_src23.arf
[Fri Dec 30 21:46:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 21:46:11 2011] Updating source flux to 2.8e-14
[Fri Dec 30 21:46:18 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting