[Fri Dec 30 07:27:41 2011] Detection parameters:
  Position = (435.3, 210.3) = 21 25 15.48 -44 18 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 461.7 +/- 27.1
  Background counts = 24.1
  Rate = 0.01 +/- 0.0006

[Fri Dec 30 07:27:42 2011] Off-axis axis estimate = 11.80'
[Fri Dec 30 09:28:59 2011] Using EEF radius (= 12.33 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 09:28:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 09:28:59 2011] Initial guess for spatial extent in simple fitting = 12.33"
[Fri Dec 30 09:28:59 2011] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.102
[Fri Dec 30 09:28:59 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 12.33"
[Fri Dec 30 10:38:52 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 30 10:38:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 10:38:52 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 30 10:38:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 10:38:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 10:38:52 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 30 10:38:52 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 30 10:38:52 2011] Fit fullrun_mos1_xmm0500050101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 30 12:13:32 2011] Spatial fit model total counts = 926.999000, observed total counts = 927.000000
[Fri Dec 30 12:13:32 2011] Offset between fit and detection position for source 2 = 0.215488 pixels
[Fri Dec 30 12:13:32 2011] 931.814000 total counts/ 608.527000 bgd. counts: snr = 13.105341
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.215488 pixels
  Position = (435.2, 210.5) = 21 25 15.50 -44 18 50.4
  Extent = 6.1 (5.5-6.9)", rotation angle = 0
  Source counts = 323.3 +/- 30.5
  Background counts = 608.5
  Rate = 0.008 +/- 0.0007
[Fri Dec 30 12:13:32 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 12:13:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 12:13:32 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 12:13:32 2011] Source does appear to be extended
[Fri Dec 30 12:13:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 14:16:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 14:16:44 2011] Initial guess for spatial extent in simple fitting = 6.06"
[Fri Dec 30 14:16:44 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.838
[Fri Dec 30 14:16:44 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.06"
[Fri Dec 30 15:25:59 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 30 15:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_src1.csv
[Fri Dec 30 15:25:59 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 30 15:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_src1.csv
[Fri Dec 30 15:25:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 15:25:59 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 30 15:25:59 2011] fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 30 15:25:59 2011] Fit fullrun_mos1_xmm0500050101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 30 17:07:08 2011] Spatial fit model total counts = 662.999000, observed total counts = 663.000000
[Fri Dec 30 17:07:08 2011] Offset between fit and detection position for source 2 = 0.033811 pixels
[Fri Dec 30 17:07:08 2011] 667.386000 total counts/ 365.266000 bgd. counts: snr = 15.807924
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.033811 pixels
  Position = (435.2, 210.5) = 21 25 15.51 -44 18 50.4
  Extent = 5.7 (5.1-6.4)", rotation angle = 0
  Source counts = 302.1 +/- 25.8
  Background counts = 365.3
  Rate = 0.007 +/- 0.0006
[Fri Dec 30 17:07:08 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:07:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:07:08 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 17:07:08 2011] Source does appear to be extended
[Fri Dec 30 17:07:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 19:47:03 2011] XMMSAS src. selection expression = ellipse(37811.588680, 18262.357400, 340.333210, 340.333210, 0.000000, X, Y)
[Fri Dec 30 19:47:03 2011] Writing source region out to fullrun_mos1_xmm0500050101_pi300-10000_pass1_cl_src2_src.reg
[Fri Dec 30 19:47:03 2011] Extracting stamp from image fullrun_mos1_xmm0500050101_pi300-10000_cl_sm2.00.img.gz, (416, 191) - (455, 230)
[Fri Dec 30 19:47:03 2011] XMMSAS bgd. selection expression = annulus(37811.588680, 18262.357400, 567.222016, 1134.444033, X, Y)
[Fri Dec 30 19:47:03 2011] Writing fullrun_mos1_xmm0500050101_pi300-10000_pass1_cl_src2.gif
[Fri Dec 30 19:47:09 2011] Mean detx,y = (-6372.90, 11881.09) 
[Fri Dec 30 19:47:13 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 19:47:27 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 19:47:27 2011] Setting source spectrum file to fullrun_mos1_xmm0500050101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Dec 30 19:47:27 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0500050101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Dec 30 21:46:09 2011] Updating aperture counts using extracted products
[Fri Dec 30 21:46:09 2011] Error reading totcts from fullrun_mos1_xmm0500050101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Dec 30 21:46:11 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 21:46:11 2011] Using photon index=1.80, rate=0.00715, arf fullrun_mos1_xmm0500050101_pi300-10000_pass1_cl_src2.arf
[Fri Dec 30 21:46:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 21:46:11 2011] Updating source flux to 1.5e-13
[Fri Dec 30 21:47:18 2011] Reading fit data from xmm0500050101/analysis//spectral/fullrun_mos1_xmm0500050101_pi300-10000_pass1_cl_src2_pl.csv
[Fri Dec 30 21:47:18 2011] Spectral fit parameter nH value = 5.94437e+20
[Fri Dec 30 21:47:18 2011] Spectral fit parameter PhoIndex value = 1.95065
[Fri Dec 30 21:47:18 2011] Failed to get F(0.3-8.0) from xmm0500050101/analysis//spectral/fullrun_mos1_xmm0500050101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Dec 30 21:47:18 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 21:47:18 2011] Using Nh = 5.9e+20, photon index=1.95, rate=0.00715, arf fullrun_mos1_xmm0500050101_pi300-10000_pass1_cl_src2.arf
[Fri Dec 30 21:47:18 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 21:47:18 2011] Updating source flux to 1.5e-13