[Thu Mar 22 06:51:31 2012] Detection parameters:
  Position = (286.5, 278.0) = 18 12 24.59 -10 43 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78227.8 +/- 330.7
  Background counts = 266.1
  Rate = 1 +/- 0.006

[Thu Mar 22 06:51:34 2012] Off-axis axis estimate = 1.72'
[Thu Mar 22 06:59:20 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 06:59:20 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Mar 22 06:59:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Thu Mar 22 06:59:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Mar 22 08:01:57 2012] fullrun_pn_xmm0500030101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 22 08:01:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0500030101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 22 08:01:57 2012] fullrun_pn_xmm0500030101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 22 08:01:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0500030101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 22 08:01:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500030101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500030101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 08:01:57 2012] fullrun_pn_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 22 08:01:57 2012] fullrun_pn_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 22 08:01:57 2012] Fit fullrun_pn_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 22 09:29:12 2012] Spatial fit model total counts = 48484.000000, observed total counts = 48484.000000
[Thu Mar 22 09:29:12 2012] Offset between fit and detection position for source 1 = 0.028167 pixels
[Thu Mar 22 09:29:12 2012] 48598.600000 total counts/ 10328.000000 bgd. counts: snr = 376.579918
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.028167 pixels
  Position = (286.5, 278.0) = 18 12 24.60 -10 43 53.0
  Extent = 6.0 (6.0-6.1)", rotation angle = 0
  Source counts = 38270.6 +/- 220.5
  Background counts = 10328.0
  Rate = 1 +/- 0.006
[Thu Mar 22 09:29:12 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 09:29:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 09:29:12 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 09:29:12 2012] Source does appear to be extended
[Thu Mar 22 09:29:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 09:29:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 22 09:29:32 2012] Initial guess for spatial extent in simple fitting = 6.02"
[Thu Mar 22 09:29:32 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.846
[Thu Mar 22 09:29:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.02"
[Thu Mar 22 10:53:59 2012] fullrun_pn_xmm0500030101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 22 10:53:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500030101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 22 10:53:59 2012] fullrun_pn_xmm0500030101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 22 10:53:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500030101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 22 10:53:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500030101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500030101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 10:54:00 2012] fullrun_pn_xmm0500030101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 22 10:54:01 2012] fullrun_pn_xmm0500030101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 22 10:54:01 2012] Fit fullrun_pn_xmm0500030101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 22 12:08:05 2012] Spatial fit model total counts = 48484.000000, observed total counts = 48484.000000
[Thu Mar 22 12:08:05 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Thu Mar 22 12:08:05 2012] 48598.600000 total counts/ 10328.000000 bgd. counts: snr = 376.579918
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (286.5, 278.0) = 18 12 24.60 -10 43 53.0
  Extent = 6.0 (6.0-6.1)", rotation angle = 0
  Source counts = 38270.6 +/- 220.5
  Background counts = 10328.0
  Rate = 1 +/- 0.006
[Thu Mar 22 12:08:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 12:08:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 12:08:05 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 12:08:05 2012] Source does appear to be extended
[Thu Mar 22 12:08:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 12:08:24 2012] Counts = 38270.600000, rescaling region sizes by 3.000000
[Thu Mar 22 12:08:24 2012] XMMSAS src. selection expression = ellipse(24875.518600, 24137.182800, 1083.355231, 1083.355231, 0.000000, X, Y)
[Thu Mar 22 12:08:24 2012] Writing source region out to fullrun_pn_xmm0500030101_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 22 12:08:24 2012] Extracting stamp from image fullrun_pn_xmm0500030101_pi300-10000_cl_sm2.00.img.gz, (224, 216) - (349, 340)
[Thu Mar 22 12:08:24 2012] XMMSAS bgd. selection expression = annulus(24875.518600, 24137.182800, 5416.776156, 10833.552312, X, Y) && !ellipse(16707.822662, 24226.273560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17413.599808, 21762.152817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14304.960083, 24978.671692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18985.865677, 27609.415436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24319.032318, 35280.591583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24342.115753, 34548.018889, 1780.672051, 321.765977, 84.882471, X, Y) && !ellipse(24429.112200, 33163.608400, 1780.672051, 428.280012, 86.800620, X, Y) && !ellipse(24444.110400, 32966.148200, 984.608028, 984.608028, 0.000000, X, Y) && !ellipse(24497.804120, 32042.661800, 1443.568042, 442.401613, 79.832800, X, Y) && !ellipse(24525.488407, 31358.117127, 1340.736039, 458.731102, 89.586579, X, Y) && !ellipse(24577.340060, 30494.854100, 1340.736039, 394.462411, 89.193300, X, Y) && !ellipse(24658.515660, 28451.893400, 1220.480035, 342.665610, 83.421560, X, Y) && !ellipse(28690.158386, 28252.978607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24757.110200, 28175.280000, 883.352025, 883.352025, 0.000000, X, Y) && !ellipse(17440.363831, 26967.939117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.836761, 26238.238831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25160.878387, 25789.761902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22884.043400, 25507.097000, 613.600018, 613.600018, 0.000000, X, Y) && !ellipse(25089.699707, 22932.429993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16713.282730, 20395.627823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17764.966385, 15010.599167, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 12:08:24 2012] Writing fullrun_pn_xmm0500030101_pi300-10000_pass1_cl_src1.gif
[Thu Mar 22 12:09:27 2012] Mean detx,y = (64.01, -236.00) 
[Thu Mar 22 12:09:42 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 12:17:08 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 12:17:08 2012] Setting source spectrum file to fullrun_pn_xmm0500030101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 22 12:17:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500030101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar 22 15:48:13 2012] Updating aperture counts using extracted products
[Thu Mar 22 15:48:14 2012] Error reading totcts from fullrun_pn_xmm0500030101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 22 15:48:15 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 15:48:15 2012] Using photon index=1.80, rate=1.01, arf fullrun_pn_xmm0500030101_pi300-10000_pass1_cl_src1.arf
[Thu Mar 22 15:48:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 15:48:15 2012] Updating source flux to 2.4e-12
[Thu Mar 22 15:53:56 2012] Reading fit data from xmm0500030101/analysis//spectral/fullrun_pn_xmm0500030101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar 22 15:53:56 2012] Spectral fit parameter nH value = 9.22721e+21
[Thu Mar 22 15:53:56 2012] Spectral fit parameter PhoIndex value = 4.54178
[Thu Mar 22 15:53:56 2012] Failed to get F(0.3-8.0) from xmm0500030101/analysis//spectral/fullrun_pn_xmm0500030101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar 22 15:53:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 15:53:56 2012] Using Nh = 9.2e+21, photon index=4.54, rate=1.01, arf fullrun_pn_xmm0500030101_pi300-10000_pass1_cl_src1.arf
[Thu Mar 22 15:53:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 15:53:56 2012] Updating source flux to 2.2e-12