[Thu Mar 22 06:52:35 2012] Detection parameters:
  Position = (218.8, 317.9) = 18 12 44.56 -10 40 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.1 +/- 18.4
  Background counts = 63.9
  Rate = 0.003 +/- 0.0004

[Thu Mar 22 06:52:36 2012] Off-axis axis estimate = 5.94'
[Thu Mar 22 08:27:26 2012] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 08:27:26 2012] Initial guess for spatial extent in simple fitting = 9.40"
[Thu Mar 22 08:27:26 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.059
[Thu Mar 22 08:27:26 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.40"
[Thu Mar 22 09:29:04 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_src7.ximg exists
[Thu Mar 22 09:29:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_src7.csv
[Thu Mar 22 09:29:04 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Mar 22 09:29:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_src7.csv
[Thu Mar 22 09:29:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 09:29:04 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Mar 22 09:29:04 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Mar 22 09:29:04 2012] Fit fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Mar 22 09:29:19 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.152537 pixels away
[Thu Mar 22 09:29:19 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 09:29:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 09:29:19 2012] Assessing source extent using major
[Thu Mar 22 09:29:19 2012] Source does appear to be extended
[Thu Mar 22 09:29:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 11:13:35 2012] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 11:13:35 2012] Initial guess for spatial extent in simple fitting = 9.40"
[Thu Mar 22 11:13:35 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.059
[Thu Mar 22 11:13:35 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 9.40"
[Thu Mar 22 12:07:55 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_src7.ximg exists
[Thu Mar 22 12:07:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_src7.csv
[Thu Mar 22 12:07:55 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Mar 22 12:07:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_src7.csv
[Thu Mar 22 12:07:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 12:07:55 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Mar 22 12:07:55 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Mar 22 12:07:55 2012] Fit fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Mar 22 12:08:12 2012] Spatial fit model total counts = 602.001000, observed total counts = 602.000000
[Thu Mar 22 12:08:12 2012] Offset between fit and detection position for source 9 = 0.234675 pixels
[Thu Mar 22 12:08:12 2012] 615.662300 total counts/ 540.256000 bgd. counts: snr = 3.244202
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.234675 pixels
  Position = (218.7, 317.7) = 18 12 44.60 -10 41 0.4
  Extent = 3.5 (2.6-4.7)", rotation angle = 0
  Source counts = 75.4 +/- 24.8
  Background counts = 540.3
  Rate = 0.001 +/- 0.0004
[Thu Mar 22 12:08:12 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 12:08:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 12:08:12 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 12:08:12 2012] Source does appear to be extended
[Thu Mar 22 12:08:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 15:12:26 2012] XMMSAS src. selection expression = ellipse(18979.740200, 27589.291600, 211.258206, 211.258206, 0.000000, X, Y)
[Thu Mar 22 15:12:26 2012] Writing source region out to fullrun_mos2_xmm0500030101_pi300-10000_pass1_cl_src9_src.reg
[Thu Mar 22 15:12:26 2012] Extracting stamp from image fullrun_mos2_xmm0500030101_pi300-10000_cl_sm2.00.img.gz, (207, 306) - (231, 330)
[Thu Mar 22 15:12:26 2012] XMMSAS bgd. selection expression = annulus(18979.740200, 27589.291600, 352.097010, 704.194020, X, Y)
[Thu Mar 22 15:12:26 2012] Writing fullrun_mos2_xmm0500030101_pi300-10000_pass1_cl_src9.gif
[Thu Mar 22 15:21:06 2012] Mean detx,y = (-5664.72, -3576.44) 
[Thu Mar 22 15:21:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 15:21:22 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 15:21:22 2012] Setting source spectrum file to fullrun_mos2_xmm0500030101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Mar 22 15:21:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500030101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Mar 22 15:32:38 2012] Not generating rmf since there are only 75 counts
[Thu Mar 22 15:32:38 2012] rmf not generated due to insufficient counts
[Thu Mar 22 15:48:19 2012] Updating aperture counts using extracted products
[Thu Mar 22 15:48:19 2012] Error reading totcts from fullrun_mos2_xmm0500030101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Mar 22 15:48:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 15:48:19 2012] Using photon index=1.80, rate=0.0013, arf fullrun_mos2_xmm0500030101_pi300-10000_pass1_cl_src9.arf
[Thu Mar 22 15:48:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 15:48:20 2012] Updating source flux to 2.6e-14
[Thu Mar 22 15:49:03 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting