[Thu Mar 22 06:52:35 2012] Detection parameters:
  Position = (274.9, 280.1) = 18 12 28.00 -10 43 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.6 +/- 19.7
  Background counts = 68.8
  Rate = 0.002 +/- 0.0003

[Thu Mar 22 06:52:36 2012] Off-axis axis estimate = 2.16'
[Thu Mar 22 08:27:26 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 08:27:26 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Thu Mar 22 08:27:26 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.807
[Thu Mar 22 08:27:26 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.51"
[Thu Mar 22 09:29:04 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_src10.ximg exists
[Thu Mar 22 09:29:04 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Mar 22 09:29:04 2012] Fit fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_src10 appears to have run properly
[Thu Mar 22 09:29:04 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Mar 22 09:29:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Mar 22 09:29:04 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Mar 22 09:29:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Mar 22 09:29:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 09:29:19 2012] Source 12 is offset by -6.692267 and 1.817513 pixels which is larger than
2 X fitted extent = 0.875499 x 6.903862, not incorporating fit results
[Thu Mar 22 09:29:19 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 09:29:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 09:29:19 2012] Assessing source extent using major
[Thu Mar 22 09:29:19 2012] Source does appear to be extended
[Thu Mar 22 09:29:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 09:29:19 2012] Source is confused with source 2
[Thu Mar 22 11:13:35 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 11:13:35 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Thu Mar 22 11:13:35 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.807
[Thu Mar 22 11:13:35 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.51"
[Thu Mar 22 12:07:55 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_src10.ximg exists
[Thu Mar 22 12:07:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_src10.csv
[Thu Mar 22 12:07:55 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Mar 22 12:07:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_src10.csv
[Thu Mar 22 12:07:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 12:07:55 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Mar 22 12:07:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Mar 22 12:07:55 2012] fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Mar 22 12:07:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Mar 22 12:07:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500030101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 12:08:12 2012] Source 12 is offset by -9.064888 and 2.083881 pixels which is larger than
2 X fitted extent = 7.093839 x 7.093839, not incorporating fit results
[Thu Mar 22 12:08:12 2012] Spatial fit model total counts = 2217.990000, observed total counts = 1833.000000
[Thu Mar 22 12:08:12 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 22 12:08:12 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 12:08:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 12:08:12 2012] Assessing source extent using major
[Thu Mar 22 12:08:12 2012] Source does appear to be extended
[Thu Mar 22 12:08:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 15:12:26 2012] XMMSAS src. selection expression = ellipse(23871.768738, 24323.601624, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 22 15:12:26 2012] Writing source region out to fullrun_mos2_xmm0500030101_pi300-10000_pass1_cl_src12_src.reg
[Thu Mar 22 15:12:26 2012] Extracting stamp from image fullrun_mos2_xmm0500030101_pi300-10000_cl_sm2.00.img.gz, (237, 243) - (312, 318)
[Thu Mar 22 15:12:26 2012] XMMSAS bgd. selection expression = annulus(23871.768738, 24323.601624, 1087.500000, 2175.000000, X, Y) && !ellipse(24886.881400, 24142.495800, 1293.038437, 1293.038437, 0.000000, X, Y) && !ellipse(24174.864227, 24821.719635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.064911, 23441.643372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22920.345184, 25524.082400, 512.492015, 512.492015, 0.000000, X, Y)
[Thu Mar 22 15:12:26 2012] Writing fullrun_mos2_xmm0500030101_pi300-10000_pass1_cl_src12.gif
[Thu Mar 22 15:22:23 2012] Mean detx,y = (-747.69, -104.96) 
[Thu Mar 22 15:22:26 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 15:22:44 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 15:22:44 2012] Setting source spectrum file to fullrun_mos2_xmm0500030101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Mar 22 15:22:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500030101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Mar 22 15:39:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 22 15:39:16 2012] rmf not generated due to insufficient counts
[Thu Mar 22 15:48:19 2012] Updating aperture counts using extracted products
[Thu Mar 22 15:48:19 2012] Error reading totcts from fullrun_mos2_xmm0500030101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Mar 22 15:48:20 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 15:48:20 2012] Using photon index=1.80, rate=0.00179, arf fullrun_mos2_xmm0500030101_pi300-10000_pass1_cl_src12.arf
[Thu Mar 22 15:48:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 15:48:20 2012] Updating source flux to 1.8e-14
[Thu Mar 22 15:49:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting