[Thu Mar 22 06:52:04 2012] Detection parameters:
  Position = (286.5, 278.0) = 18 12 24.58 -10 43 52.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33000.3 +/- 217.3
  Background counts = 78.9
  Rate = 0.5 +/- 0.003

[Thu Mar 22 06:52:05 2012] Off-axis axis estimate = 1.71'
[Thu Mar 22 08:01:57 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 08:01:57 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Mar 22 08:01:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Thu Mar 22 08:01:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Thu Mar 22 08:27:26 2012] fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 22 08:27:26 2012] fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 22 08:27:26 2012] Fit fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Mar 22 08:27:26 2012] fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 22 08:27:26 2012] fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 22 08:27:26 2012] Fit fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 22 09:29:14 2012] Spatial fit model total counts = 26906.000000, observed total counts = 26906.000000
[Thu Mar 22 09:29:14 2012] Offset between fit and detection position for source 2 = 0.051424 pixels
[Thu Mar 22 09:29:14 2012] 26961.690000 total counts/ 6140.890000 bgd. counts: snr = 265.694004
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.051424 pixels
  Position = (286.6, 278.1) = 18 12 24.57 -10 43 52.6
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 20820.8 +/- 164.2
  Background counts = 6140.9
  Rate = 0.4 +/- 0.003
[Thu Mar 22 09:29:14 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 09:29:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 09:29:14 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 09:29:14 2012] Source does appear to be extended
[Thu Mar 22 09:29:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 10:54:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 22 10:54:02 2012] Initial guess for spatial extent in simple fitting = 5.55"
[Thu Mar 22 10:54:02 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.951
[Thu Mar 22 10:54:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.55"
[Thu Mar 22 11:13:34 2012] fullrun_mos1_xmm0500030101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 22 11:13:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500030101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 22 11:13:34 2012] fullrun_mos1_xmm0500030101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 22 11:13:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500030101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 22 11:13:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500030101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500030101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 11:13:35 2012] fullrun_mos1_xmm0500030101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 22 11:13:35 2012] fullrun_mos1_xmm0500030101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 22 11:13:35 2012] Fit fullrun_mos1_xmm0500030101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 22 12:08:08 2012] Spatial fit model total counts = 26906.000000, observed total counts = 26906.000000
[Thu Mar 22 12:08:08 2012] Offset between fit and detection position for source 2 = 0.000000 pixels
[Thu Mar 22 12:08:08 2012] 26961.680000 total counts/ 6140.880000 bgd. counts: snr = 265.694220
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000000 pixels
  Position = (286.6, 278.1) = 18 12 24.57 -10 43 52.6
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 20820.8 +/- 164.2
  Background counts = 6140.9
  Rate = 0.4 +/- 0.003
[Thu Mar 22 12:08:08 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 12:08:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 12:08:08 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 12:08:08 2012] Source does appear to be extended
[Thu Mar 22 12:08:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 14:51:02 2012] Counts = 20820.800000, rescaling region sizes by 3.000000
[Thu Mar 22 14:51:02 2012] XMMSAS src. selection expression = ellipse(24883.947200, 24145.092400, 999.216029, 999.216029, 0.000000, X, Y)
[Thu Mar 22 14:51:02 2012] Writing source region out to fullrun_mos1_xmm0500030101_pi300-10000_pass1_cl_src2_src.reg
[Thu Mar 22 14:51:02 2012] Extracting stamp from image fullrun_mos1_xmm0500030101_pi300-10000_cl_sm2.00.img.gz, (229, 221) - (344, 336)
[Thu Mar 22 14:51:02 2012] XMMSAS bgd. selection expression = annulus(24883.947200, 24145.092400, 4996.080144, 9992.160288, X, Y) && !ellipse(17412.430267, 21721.042343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16724.662186, 16223.194855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14333.769806, 24942.958893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16750.860687, 24234.830719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26066.219482, 22957.376648, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 14:51:02 2012] Writing fullrun_mos1_xmm0500030101_pi300-10000_pass1_cl_src2.gif
[Thu Mar 22 14:51:20 2012] Mean detx,y = (314.07, -256.57) 
[Thu Mar 22 14:51:24 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 14:58:19 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 14:58:19 2012] Setting source spectrum file to fullrun_mos1_xmm0500030101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar 22 14:58:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500030101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Mar 22 15:48:18 2012] Updating aperture counts using extracted products
[Thu Mar 22 15:48:18 2012] Error reading totcts from fullrun_mos1_xmm0500030101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar 22 15:48:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 15:48:18 2012] Using photon index=1.80, rate=0.358, arf fullrun_mos1_xmm0500030101_pi300-10000_pass1_cl_src2.arf
[Thu Mar 22 15:48:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 15:48:18 2012] Updating source flux to 3.3e-12
[Thu Mar 22 15:49:03 2012] Reading fit data from xmm0500030101/analysis//spectral/fullrun_mos1_xmm0500030101_pi300-10000_pass1_cl_src2_pl.csv
[Thu Mar 22 15:49:03 2012] Spectral fit parameter nH value = 8.4587e+21
[Thu Mar 22 15:49:03 2012] Spectral fit parameter PhoIndex value = 4.34652
[Thu Mar 22 15:49:03 2012] Failed to get F(0.3-8.0) from xmm0500030101/analysis//spectral/fullrun_mos1_xmm0500030101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Mar 22 15:49:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 15:49:03 2012] Using Nh = 8.5e+21, photon index=4.35, rate=0.358, arf fullrun_mos1_xmm0500030101_pi300-10000_pass1_cl_src2.arf
[Thu Mar 22 15:49:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 15:49:03 2012] Updating source flux to 2.4e-12