[Thu Mar 22 06:52:04 2012] Detection parameters:
  Position = (276.9, 263.0) = 18 12 27.43 -10 45 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.1 +/- 15.3
  Background counts = 63.9
  Rate = 0.001 +/- 0.0003

[Thu Mar 22 06:52:05 2012] Off-axis axis estimate = 3.01'
[Thu Mar 22 08:01:57 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 08:01:57 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Thu Mar 22 08:01:57 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.556
[Thu Mar 22 08:01:57 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.93"
[Thu Mar 22 08:27:26 2012] fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_src12.ximg exists
[Thu Mar 22 08:27:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_src12.csv
[Thu Mar 22 08:27:26 2012] fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Mar 22 08:27:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_src12.csv
[Thu Mar 22 08:27:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 08:27:26 2012] fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Mar 22 08:27:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Mar 22 08:27:26 2012] fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Mar 22 08:27:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Mar 22 08:27:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500030101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 09:29:14 2012] Spatial fit model total counts = -100.301000, observed total counts = 1017.000000
[Thu Mar 22 09:29:14 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 22 09:29:14 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 09:29:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 09:29:14 2012] Assessing source extent using major
[Thu Mar 22 09:29:14 2012] Source does appear to be extended
[Thu Mar 22 09:29:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 09:29:14 2012] Deleting source due to low Poisson probability 0.9