[Sun Mar 11 10:33:39 2012] Detection parameters:
  Position = (309.3, 316.2) = 7 39 17.69 5 13 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47321.4 +/- 258.8
  Background counts = 149.7
  Rate = 1 +/- 0.008

[Sun Mar 11 10:33:40 2012] Off-axis axis estimate = 1.51'
[Sun Mar 11 10:38:58 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 10:38:58 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Sun Mar 11 10:38:58 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.864
[Sun Mar 11 10:38:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.18"
[Sun Mar 11 11:12:43 2012] fullrun_pn_xmm0415580301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 11 11:12:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0415580301_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 11:12:43 2012] fullrun_pn_xmm0415580301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 11 11:12:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0415580301_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 11:12:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0415580301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0415580301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 11:12:43 2012] fullrun_pn_xmm0415580301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 11 11:12:43 2012] fullrun_pn_xmm0415580301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 11 11:12:43 2012] Fit fullrun_pn_xmm0415580301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 11 12:00:11 2012] Spatial fit model total counts = 37943.300000, observed total counts = 37960.000000
[Sun Mar 11 12:00:11 2012] Offset between fit and detection position for source 1 = 0.168268 pixels
[Sun Mar 11 12:00:11 2012] 38008.490000 total counts/ 7522.090000 bgd. counts: snr = 351.509349
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.168268 pixels
  Position = (309.2, 316.3) = 7 39 17.73 5 13 24.2
  Extent = 6.1 (6.1-6.2)", rotation angle = 0
  Source counts = 30486.4 +/- 195.0
  Background counts = 7522.1
  Rate = 1 +/- 0.006
[Sun Mar 11 12:00:11 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 12:00:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 12:00:11 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 12:00:11 2012] Source does appear to be extended
[Sun Mar 11 12:00:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 12:00:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 12:00:29 2012] Initial guess for spatial extent in simple fitting = 6.12"
[Sun Mar 11 12:00:29 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.101
[Sun Mar 11 12:00:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.12"
[Sun Mar 11 12:44:46 2012] fullrun_pn_xmm0415580301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 11 12:44:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0415580301_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 12:44:47 2012] fullrun_pn_xmm0415580301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 11 12:44:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0415580301_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 12:44:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0415580301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0415580301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 12:44:47 2012] fullrun_pn_xmm0415580301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 11 12:44:47 2012] fullrun_pn_xmm0415580301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 11 12:44:47 2012] Fit fullrun_pn_xmm0415580301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 11 13:24:23 2012] Spatial fit model total counts = 37977.400000, observed total counts = 37960.000000
[Sun Mar 11 13:24:23 2012] Offset between fit and detection position for source 1 = 0.000785 pixels
[Sun Mar 11 13:24:23 2012] 38040.720000 total counts/ 7524.120000 bgd. counts: snr = 351.810088
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000785 pixels
  Position = (309.2, 316.3) = 7 39 17.73 5 13 24.3
  Extent = 6.1 (6.1-6.2)", rotation angle = 0
  Source counts = 30516.6 +/- 195.0
  Background counts = 7524.1
  Rate = 1 +/- 0.006
[Sun Mar 11 13:24:23 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 13:24:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 13:24:23 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 13:24:23 2012] Source does appear to be extended
[Sun Mar 11 13:24:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 13:24:39 2012] Counts = 30516.600000, rescaling region sizes by 3.000000
[Sun Mar 11 13:24:39 2012] XMMSAS src. selection expression = ellipse(26852.073920, 27468.558800, 1101.265232, 1101.265232, 0.000000, X, Y)
[Sun Mar 11 13:24:39 2012] Writing source region out to fullrun_pn_xmm0415580301_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 11 13:24:39 2012] Extracting stamp from image fullrun_pn_xmm0415580301_pi300-10000_cl_sm2.00.img.gz, (246, 253) - (372, 380)
[Sun Mar 11 13:24:39 2012] XMMSAS bgd. selection expression = annulus(26852.073920, 27468.558800, 5506.326158, 11012.652317, X, Y) && !ellipse(16593.726761, 34323.533173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17651.454590, 33778.816742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29139.997345, 31772.440308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31128.685974, 24643.843292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37072.510381, 23278.171314, 518.228696, 324.582198, 131.849567, X, Y) && !ellipse(36740.435020, 35544.833800, 580.716017, 305.336009, 42.045536, X, Y) && !ellipse(37715.609222, 28521.795013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25905.260986, 27955.827728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25330.542725, 26757.567871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20437.064865, 25454.798096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16881.289000, 19598.956000, 1530.776044, 357.562410, 20.652908, X, Y)
[Sun Mar 11 13:24:39 2012] Writing fullrun_pn_xmm0415580301_pi300-10000_pass1_cl_src1.gif
[Sun Mar 11 13:25:16 2012] Mean detx,y = (100.14, 79.96) 
[Sun Mar 11 13:25:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 13:30:27 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 13:30:27 2012] Setting source spectrum file to fullrun_pn_xmm0415580301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 11 13:30:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0415580301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 11 14:58:08 2012] Updating aperture counts using extracted products
[Sun Mar 11 14:58:08 2012] Error reading totcts from fullrun_pn_xmm0415580301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 11 14:58:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 14:58:08 2012] Using photon index=1.80, rate=0.978, arf fullrun_pn_xmm0415580301_pi300-10000_pass1_cl_src1.arf
[Sun Mar 11 14:58:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 14:58:08 2012] Updating source flux to 3e-12
[Sun Mar 11 14:59:23 2012] Reading fit data from xmm0415580301/analysis//spectral/fullrun_pn_xmm0415580301_pi300-10000_pass1_cl_src1_pl.csv
[Sun Mar 11 14:59:23 2012] Spectral fit parameter nH value = 2.56438e+21
[Sun Mar 11 14:59:23 2012] Spectral fit parameter PhoIndex value = 7.13919
[Sun Mar 11 14:59:23 2012] Failed to get F(0.3-8.0) from xmm0415580301/analysis//spectral/fullrun_pn_xmm0415580301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Mar 11 14:59:23 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 14:59:23 2012] Using Nh = 2.6e+21, photon index=7.14, rate=0.978, arf fullrun_pn_xmm0415580301_pi300-10000_pass1_cl_src1.arf
[Sun Mar 11 14:59:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 14:59:23 2012] Updating source flux to 1.6e-12