[Sun Mar 11 10:34:14 2012] Detection parameters:
  Position = (309.2, 316.1) = 7 39 17.71 5 13 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10091.2 +/- 120.5
  Background counts = 56.0
  Rate = 0.3 +/- 0.003

[Sun Mar 11 10:34:15 2012] Off-axis axis estimate = 1.50'
[Sun Mar 11 11:12:43 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 11:12:43 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Sun Mar 11 11:12:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.865
[Sun Mar 11 11:12:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.18"
[Sun Mar 11 11:34:03 2012] fullrun_mos1_xmm0415580301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 11 11:34:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0415580301_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 11:34:03 2012] fullrun_mos1_xmm0415580301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 11 11:34:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0415580301_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 11:34:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0415580301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0415580301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 11:34:04 2012] fullrun_mos1_xmm0415580301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 11 11:34:04 2012] fullrun_mos1_xmm0415580301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 11 11:34:04 2012] Fit fullrun_mos1_xmm0415580301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 11 12:00:14 2012] Spatial fit model total counts = 9051.590000, observed total counts = 9023.000000
[Sun Mar 11 12:00:14 2012] Offset between fit and detection position for source 1 = 0.083639 pixels
[Sun Mar 11 12:00:14 2012] 9043.850000 total counts/ 2267.540000 bgd. counts: snr = 142.303567
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.083639 pixels
  Position = (309.3, 316.2) = 7 39 17.71 5 13 23.8
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 6776.3 +/- 95.1
  Background counts = 2267.5
  Rate = 0.2 +/- 0.003
[Sun Mar 11 12:00:14 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 12:00:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 12:00:14 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 12:00:14 2012] Source does appear to be extended
[Sun Mar 11 12:00:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 12:44:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 12:44:47 2012] Initial guess for spatial extent in simple fitting = 5.49"
[Sun Mar 11 12:44:47 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.290
[Sun Mar 11 12:44:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.49"
[Sun Mar 11 13:02:01 2012] fullrun_mos1_xmm0415580301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 11 13:02:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0415580301_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 13:02:01 2012] fullrun_mos1_xmm0415580301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 11 13:02:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0415580301_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 13:02:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0415580301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0415580301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 13:02:01 2012] fullrun_mos1_xmm0415580301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 11 13:02:01 2012] fullrun_mos1_xmm0415580301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 11 13:02:01 2012] Fit fullrun_mos1_xmm0415580301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 11 13:24:26 2012] Spatial fit model total counts = 9034.450000, observed total counts = 9023.000000
[Sun Mar 11 13:24:26 2012] Offset between fit and detection position for source 1 = 0.000047 pixels
[Sun Mar 11 13:24:26 2012] 9026.620000 total counts/ 2257.400000 bgd. counts: snr = 142.473590
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000047 pixels
  Position = (309.3, 316.2) = 7 39 17.71 5 13 23.8
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 6769.2 +/- 95.0
  Background counts = 2257.4
  Rate = 0.2 +/- 0.003
[Sun Mar 11 13:24:26 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 13:24:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 13:24:26 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 13:24:26 2012] Source does appear to be extended
[Sun Mar 11 13:24:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 14:20:01 2012] Counts = 6769.220000, rescaling region sizes by 2.000000
[Sun Mar 11 14:20:01 2012] XMMSAS src. selection expression = ellipse(26857.003800, 27459.679200, 660.175219, 660.175219, 0.000000, X, Y)
[Sun Mar 11 14:20:01 2012] Writing source region out to fullrun_mos1_xmm0415580301_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 11 14:20:01 2012] Extracting stamp from image fullrun_mos1_xmm0415580301_pi300-10000_cl_sm2.00.img.gz, (271, 278) - (347, 354)
[Sun Mar 11 14:20:01 2012] XMMSAS bgd. selection expression = annulus(26857.003800, 27459.679200, 2200.584063, 4401.168127, X, Y)
[Sun Mar 11 14:20:01 2012] Writing fullrun_mos1_xmm0415580301_pi300-10000_pass1_cl_src1.gif
[Sun Mar 11 14:20:14 2012] Mean detx,y = (-17.90, -213.47) 
[Sun Mar 11 14:20:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 14:21:06 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 14:21:06 2012] Setting source spectrum file to fullrun_mos1_xmm0415580301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 11 14:21:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0415580301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 11 14:58:08 2012] Updating aperture counts using extracted products
[Sun Mar 11 14:58:08 2012] Error reading totcts from fullrun_mos1_xmm0415580301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 11 14:58:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 14:58:08 2012] Using photon index=1.80, rate=0.18, arf fullrun_mos1_xmm0415580301_pi300-10000_pass1_cl_src1.arf
[Sun Mar 11 14:58:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 14:58:09 2012] Updating source flux to 2.1e-12
[Sun Mar 11 14:58:33 2012] Reading fit data from xmm0415580301/analysis//spectral/fullrun_mos1_xmm0415580301_pi300-10000_pass1_cl_src1_pl.csv
[Sun Mar 11 14:58:33 2012] Spectral fit parameter nH value = 1.49114e+21
[Sun Mar 11 14:58:33 2012] Spectral fit parameter PhoIndex value = 6.24335
[Sun Mar 11 14:58:33 2012] Failed to get F(0.3-8.0) from xmm0415580301/analysis//spectral/fullrun_mos1_xmm0415580301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Mar 11 14:58:33 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 14:58:33 2012] Using Nh = 1.5e+21, photon index=6.24, rate=0.18, arf fullrun_mos1_xmm0415580301_pi300-10000_pass1_cl_src1.arf
[Sun Mar 11 14:58:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 14:58:34 2012] Updating source flux to 1.8e-12