[Sat Sep  1 03:32:32 2012] Detection parameters:
  Position = (296.9, 218.0) = 7 39 21.93 5 6 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.2 +/- 12.9
  Background counts = 10.5
  Rate = 0.005 +/- 0.0006

[Sat Sep  1 03:32:32 2012] Off-axis axis estimate = 5.84'
[Sat Sep  1 04:29:09 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 04:29:09 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Sat Sep  1 04:29:09 2012] source mask rpix=2.1, npix_max = 28, mask sum = 33, frac = 1.176
[Sat Sep  1 04:29:09 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.35"
[Sat Sep  1 04:51:03 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_src3.ximg exists
[Sat Sep  1 04:51:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_src3.csv
[Sat Sep  1 04:51:03 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Sep  1 04:51:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_src3.csv
[Sat Sep  1 04:51:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 04:51:03 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Sep  1 04:51:03 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Sep  1 04:51:03 2012] Fit fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Sep  1 04:51:12 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 12.521237 pixels away
[Sat Sep  1 04:51:12 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 04:51:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 04:51:12 2012] Assessing source extent using major
[Sat Sep  1 04:51:12 2012] Source does appear to be extended
[Sat Sep  1 04:51:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 05:32:33 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 05:32:33 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Sat Sep  1 05:32:33 2012] source mask rpix=2.1, npix_max = 28, mask sum = 33, frac = 1.176
[Sat Sep  1 05:32:33 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.35"
[Sat Sep  1 05:49:24 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_src3.ximg exists
[Sat Sep  1 05:49:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_src3.csv
[Sat Sep  1 05:49:24 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Sep  1 05:49:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_src3.csv
[Sat Sep  1 05:49:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 05:49:24 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Sep  1 05:49:24 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Sep  1 05:49:24 2012] Fit fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Sep  1 05:49:32 2012] Spatial fit model total counts = 181.291000, observed total counts = 182.000000
[Sat Sep  1 05:49:32 2012] Offset between fit and detection position for source 16 = 0.212074 pixels
[Sat Sep  1 05:49:32 2012] 183.650900 total counts/ 112.710000 bgd. counts: snr = 6.682138
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.212074 pixels
  Position = (297.0, 218.1) = 7 39 21.90 5 6 16.0
  Extent = 4.9 (3.8-6.1)", rotation angle = 0
  Source counts = 70.9 +/- 13.6
  Background counts = 112.7
  Rate = 0.002 +/- 0.0004
[Sat Sep  1 05:49:32 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 05:49:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 05:49:32 2012] Assessing source extent using major axis lower bound
[Sat Sep  1 05:49:32 2012] Source does appear to be extended
[Sat Sep  1 05:49:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 06:09:41 2012] XMMSAS src. selection expression = ellipse(25790.775966, 18929.368000, 296.118609, 296.118609, 0.000000, X, Y)
[Sat Sep  1 06:09:41 2012] Writing source region out to fullrun_mos2_xmm0415580201_pi300-10000_pass1_cl_src16_src.reg
[Sat Sep  1 06:09:41 2012] Extracting stamp from image fullrun_mos2_xmm0415580201_pi300-10000_cl_sm2.00.img.gz, (280, 201) - (314, 235)
[Sat Sep  1 06:09:41 2012] XMMSAS bgd. selection expression = annulus(25790.775966, 18929.368000, 493.531014, 987.062028, X, Y)
[Sat Sep  1 06:09:41 2012] Writing fullrun_mos2_xmm0415580201_pi300-10000_pass1_cl_src16.gif
[Sat Sep  1 06:10:16 2012] Mean detx,y = (2292.27, -8523.13) 
[Sat Sep  1 06:10:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  1 06:10:21 2012] grppha failed
[Sat Sep  1 06:10:21 2012] Setting source spectrum file to fullrun_mos2_xmm0415580201_pi300-10000_pass1_cl_src16_src.pi.gz
[Sat Sep  1 06:10:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0415580201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat Sep  1 06:11:58 2012] Not generating rmf since there are only 70 counts
[Sat Sep  1 06:11:58 2012] rmf not generated due to insufficient counts
[Sat Sep  1 06:12:34 2012] Updating aperture counts using extracted products
[Sat Sep  1 06:12:34 2012] Error reading totcts from fullrun_mos2_xmm0415580201_pi300-10000_pass1_cl_src16_src.pi.gz
[Sat Sep  1 06:12:34 2012] No arf file for this source, not re-computing flux
[Sat Sep  1 06:12:36 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Sep  1 06:12:37 2012] xmm0415580201/analysis//spectral/fullrun_mos2_xmm0415580201_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete