[Sat Sep  1 03:32:32 2012] Detection parameters:
  Position = (428.7, 268.8) = 7 38 43.54 5 9 55.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.1 +/- 13.4
  Background counts = 10.8
  Rate = 0.006 +/- 0.0007

[Sat Sep  1 03:32:32 2012] Off-axis axis estimate = 9.69'
[Sat Sep  1 04:29:09 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 04:29:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep  1 04:29:09 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Sat Sep  1 04:29:09 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Sat Sep  1 04:29:09 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.27"
[Sat Sep  1 04:51:03 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_src2.ximg exists
[Sat Sep  1 04:51:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_src2.csv
[Sat Sep  1 04:51:03 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Sep  1 04:51:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_src2.csv
[Sat Sep  1 04:51:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 04:51:03 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Sep  1 04:51:03 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Sep  1 04:51:03 2012] Fit fullrun_mos2_xmm0415580201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Sep  1 04:51:12 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.692808 pixels away
[Sat Sep  1 04:51:12 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 04:51:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 04:51:12 2012] Assessing source extent using major
[Sat Sep  1 04:51:12 2012] Source does appear to be extended
[Sat Sep  1 04:51:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 05:32:33 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 05:32:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep  1 05:32:33 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Sat Sep  1 05:32:33 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Sat Sep  1 05:32:33 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.27"
[Sat Sep  1 05:49:24 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_src2.ximg exists
[Sat Sep  1 05:49:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_src2.csv
[Sat Sep  1 05:49:24 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Sep  1 05:49:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_src2.csv
[Sat Sep  1 05:49:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 05:49:24 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Sep  1 05:49:24 2012] fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Sep  1 05:49:24 2012] Fit fullrun_mos2_xmm0415580201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Sep  1 05:49:32 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 15.020118 pixels away
[Sat Sep  1 05:49:32 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 05:49:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 05:49:32 2012] Assessing source extent using major
[Sat Sep  1 05:49:32 2012] Source does appear to be extended
[Sat Sep  1 05:49:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 06:09:41 2012] XMMSAS src. selection expression = ellipse(37251.308319, 23340.569061, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep  1 06:09:41 2012] Writing source region out to fullrun_mos2_xmm0415580201_pi300-10000_pass1_cl_src11_src.reg
[Sat Sep  1 06:09:41 2012] Extracting stamp from image fullrun_mos2_xmm0415580201_pi300-10000_cl_sm2.00.img.gz, (391, 231) - (466, 306)
[Sat Sep  1 06:09:41 2012] XMMSAS bgd. selection expression = annulus(37251.308319, 23340.569061, 1087.500000, 2175.000000, X, Y)
[Sat Sep  1 06:09:41 2012] Writing fullrun_mos2_xmm0415580201_pi300-10000_pass1_cl_src11.gif
[Sat Sep  1 06:10:01 2012] Mean detx,y = (-9632.66, -5742.10) 
[Sat Sep  1 06:10:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  1 06:10:14 2012] grppha failed
[Sat Sep  1 06:10:14 2012] Setting source spectrum file to fullrun_mos2_xmm0415580201_pi300-10000_pass1_cl_src11_src.pi.gz
[Sat Sep  1 06:10:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0415580201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Sep  1 06:11:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep  1 06:11:58 2012] rmf not generated due to insufficient counts
[Sat Sep  1 06:12:34 2012] Updating aperture counts using extracted products
[Sat Sep  1 06:12:34 2012] Error reading totcts from fullrun_mos2_xmm0415580201_pi300-10000_pass1_cl_src11_src.pi.gz
[Sat Sep  1 06:12:34 2012] No arf file for this source, not re-computing flux
[Sat Sep  1 06:12:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Sep  1 06:12:37 2012] xmm0415580201/analysis//spectral/fullrun_mos2_xmm0415580201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete