[Wed Dec 21 10:44:18 2011] Detection parameters:
  Position = (313.4, 317.8) = 7 39 17.76 5 13 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57320.8 +/- 283.5
  Background counts = 112.9
  Rate = 1 +/- 0.007

[Wed Dec 21 10:44:21 2011] Off-axis axis estimate = 1.77'
[Wed Dec 21 10:52:05 2011] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 10:52:05 2011] Initial guess for spatial extent in simple fitting = 7.32"
[Wed Dec 21 10:52:05 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.050
[Wed Dec 21 10:52:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Wed Dec 21 12:16:06 2011] fullrun_pn_xmm0415580101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 21 12:16:06 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0415580101_pi300-10000_cl_pass0_src1.csv
[Wed Dec 21 12:16:06 2011] fullrun_pn_xmm0415580101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 21 12:16:06 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0415580101_pi300-10000_cl_pass0_src1.csv
[Wed Dec 21 12:16:06 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0415580101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0415580101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 12:16:07 2011] fullrun_pn_xmm0415580101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 21 12:16:07 2011] fullrun_pn_xmm0415580101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 21 12:16:07 2011] Fit fullrun_pn_xmm0415580101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Dec 21 13:45:10 2011] Spatial fit model total counts = 48695.500000, observed total counts = 48734.000000
[Wed Dec 21 13:45:10 2011] Offset between fit and detection position for source 1 = 0.178101 pixels
[Wed Dec 21 13:45:10 2011] 48697.030000 total counts/ 9756.330000 bgd. counts: snr = 394.239843
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.178101 pixels
  Position = (313.3, 317.7) = 7 39 17.79 5 13 23.4
  Extent = 6.0 (5.9-6.0)", rotation angle = 0
  Source counts = 38940.7 +/- 220.7
  Background counts = 9756.3
  Rate = 1 +/- 0.005
[Wed Dec 21 13:45:10 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 13:45:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 13:45:10 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 13:45:10 2011] Source does appear to be extended
[Wed Dec 21 13:45:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 13:45:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 13:45:36 2011] Initial guess for spatial extent in simple fitting = 5.97"
[Wed Dec 21 13:45:36 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.142
[Wed Dec 21 13:45:36 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.97"
[Wed Dec 21 15:17:52 2011] fullrun_pn_xmm0415580101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Dec 21 15:17:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0415580101_pi300-10000_cl_pass1_src1.csv
[Wed Dec 21 15:17:52 2011] fullrun_pn_xmm0415580101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Dec 21 15:17:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0415580101_pi300-10000_cl_pass1_src1.csv
[Wed Dec 21 15:17:52 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0415580101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0415580101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 15:17:52 2011] fullrun_pn_xmm0415580101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Dec 21 15:17:52 2011] fullrun_pn_xmm0415580101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Dec 21 15:17:52 2011] Fit fullrun_pn_xmm0415580101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 21 16:16:19 2011] Spatial fit model total counts = 48672.600000, observed total counts = 48734.000000
[Wed Dec 21 16:16:19 2011] Offset between fit and detection position for source 1 = 0.000099 pixels
[Wed Dec 21 16:16:19 2011] 48674.630000 total counts/ 9741.230000 bgd. counts: snr = 394.471320
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000099 pixels
  Position = (313.3, 317.7) = 7 39 17.79 5 13 23.4
  Extent = 6.0 (5.9-6.0)", rotation angle = 0
  Source counts = 38933.4 +/- 220.6
  Background counts = 9741.2
  Rate = 1 +/- 0.005
[Wed Dec 21 16:16:19 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 16:16:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 16:16:19 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 16:16:19 2011] Source does appear to be extended
[Wed Dec 21 16:16:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 16:16:40 2011] Counts = 38933.400000, rescaling region sizes by 3.000000
[Wed Dec 21 16:16:40 2011] XMMSAS src. selection expression = ellipse(27205.044600, 27590.341200, 1074.679231, 1074.679231, 0.000000, X, Y)
[Wed Dec 21 16:16:40 2011] Writing source region out to fullrun_pn_xmm0415580101_pi300-10000_pass1_cl_src1_src.reg
[Wed Dec 21 16:16:40 2011] Extracting stamp from image fullrun_pn_xmm0415580101_pi300-10000_cl_sm2.00.img.gz, (251, 256) - (375, 379)
[Wed Dec 21 16:16:40 2011] XMMSAS bgd. selection expression = annulus(27205.044600, 27590.341200, 5373.396155, 10746.792309, X, Y) && !ellipse(29483.648407, 31934.102386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16930.785385, 34407.081635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19027.336200, 30546.229200, 474.460014, 474.460014, 0.000000, X, Y) && !ellipse(31405.738800, 24781.320600, 766.885622, 766.885622, 0.000000, X, Y) && !ellipse(37432.038818, 23372.124084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37111.032501, 35646.040436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29407.276489, 34797.978943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33449.290436, 34438.387085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20860.805600, 32662.389400, 448.221613, 448.221613, 0.000000, X, Y) && !ellipse(24354.415894, 31891.799805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26089.362800, 31698.197620, 353.993610, 353.993610, 0.000000, X, Y) && !ellipse(26231.001221, 28102.478271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22696.981200, 19935.567200, 467.357006, 467.357006, 0.000000, X, Y) && !ellipse(25690.464000, 26822.267900, 395.022411, 395.022411, 0.000000, X, Y) && !ellipse(17284.841507, 26240.354889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25218.546200, 26196.165854, 672.740819, 672.740819, 61.611000, X, Y) && !ellipse(20803.700200, 25578.799200, 334.181610, 334.181610, 0.000000, X, Y) && !ellipse(27622.214000, 20868.543000, 1375.512040, 1375.512040, 0.000000, X, Y) && !ellipse(33251.254200, 22453.619800, 470.437614, 470.437614, 0.000000, X, Y) && !ellipse(19586.084400, 21575.950200, 396.747211, 396.747211, 0.000000, X, Y) && !ellipse(17274.093948, 19707.572998, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 21 16:16:40 2011] Writing fullrun_pn_xmm0415580101_pi300-10000_pass1_cl_src1.gif
[Wed Dec 21 16:17:58 2011] Mean detx,y = (464.87, 13.65) 
[Wed Dec 21 16:18:16 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 16:25:44 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 16:25:44 2011] Setting source spectrum file to fullrun_pn_xmm0415580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 21 16:25:44 2011] Setting bgd. spectrum file to fullrun_pn_xmm0415580101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Dec 21 18:35:33 2011] Updating aperture counts using extracted products
[Wed Dec 21 18:35:33 2011] Error reading totcts from fullrun_pn_xmm0415580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 21 18:35:35 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 18:35:35 2011] Using photon index=1.80, rate=0.968, arf fullrun_pn_xmm0415580101_pi300-10000_pass1_cl_src1.arf
[Wed Dec 21 18:35:35 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 18:35:35 2011] Updating source flux to 2.9e-12
[Wed Dec 21 18:39:03 2011] Reading fit data from xmm0415580101/analysis//spectral/fullrun_pn_xmm0415580101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Dec 21 18:39:03 2011] Spectral fit parameter nH value = 2.53844e+21
[Wed Dec 21 18:39:03 2011] Spectral fit parameter PhoIndex value = 7.1242
[Wed Dec 21 18:39:03 2011] Failed to get F(0.3-8.0) from xmm0415580101/analysis//spectral/fullrun_pn_xmm0415580101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Dec 21 18:39:03 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 18:39:03 2011] Using Nh = 2.5e+21, photon index=7.12, rate=0.968, arf fullrun_pn_xmm0415580101_pi300-10000_pass1_cl_src1.arf
[Wed Dec 21 18:39:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 18:39:03 2011] Updating source flux to 1.6e-12