[Fri Mar 23 02:57:37 2012] Detection parameters:
  Position = (130.9, 208.1) = 18 57 32.29 -38 1 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.6 +/- 17.9
  Background counts = 77.6
  Rate = 0.003 +/- 0.0004

[Fri Mar 23 02:57:37 2012] Off-axis axis estimate = 13.80'
[Fri Mar 23 03:23:56 2012] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 03:23:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 23 03:23:56 2012] Initial guess for spatial extent in simple fitting = 13.33"
[Fri Mar 23 03:23:56 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.102
[Fri Mar 23 03:23:56 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.33"
[Fri Mar 23 03:41:19 2012] fullrun_mos2_xmm0415180101_pi300-10000_cl_pass0_src10.ximg exists
[Fri Mar 23 03:41:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0415180101_pi300-10000_cl_pass0_src10.csv
[Fri Mar 23 03:41:19 2012] fullrun_mos2_xmm0415180101_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Mar 23 03:41:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0415180101_pi300-10000_cl_pass0_src10.csv
[Fri Mar 23 03:41:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0415180101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0415180101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 03:41:19 2012] fullrun_mos2_xmm0415180101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Mar 23 03:41:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0415180101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Mar 23 03:41:19 2012] fullrun_mos2_xmm0415180101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Mar 23 03:41:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0415180101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Mar 23 03:41:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0415180101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0415180101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 03:41:28 2012] Spatial fit model total counts = 324.135000, observed total counts = 278.000000
[Fri Mar 23 03:41:28 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 23 03:41:28 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 03:41:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 03:41:28 2012] Assessing source extent using major
[Fri Mar 23 03:41:28 2012] Source does appear to be extended
[Fri Mar 23 03:41:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 03:57:39 2012] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 03:57:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 23 03:57:39 2012] Initial guess for spatial extent in simple fitting = 13.33"
[Fri Mar 23 03:57:39 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.102
[Fri Mar 23 03:57:39 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 13.33"
[Fri Mar 23 04:11:06 2012] fullrun_mos2_xmm0415180101_pi300-10000_cl_pass1_src7.ximg exists
[Fri Mar 23 04:11:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0415180101_pi300-10000_cl_pass1_src7.csv
[Fri Mar 23 04:11:06 2012] fullrun_mos2_xmm0415180101_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Mar 23 04:11:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0415180101_pi300-10000_cl_pass1_src7.csv
[Fri Mar 23 04:11:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0415180101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0415180101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 04:11:06 2012] fullrun_mos2_xmm0415180101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Mar 23 04:11:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0415180101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Mar 23 04:11:06 2012] fullrun_mos2_xmm0415180101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Mar 23 04:11:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0415180101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Mar 23 04:11:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0415180101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0415180101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 04:11:10 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 17.312882 pixels away
[Fri Mar 23 04:11:10 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 04:11:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 04:11:10 2012] Assessing source extent using major
[Fri Mar 23 04:11:10 2012] Source does appear to be extended
[Fri Mar 23 04:11:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 04:36:38 2012] XMMSAS src. selection expression = ellipse(11343.543060, 18055.942993, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 23 04:36:38 2012] Writing source region out to fullrun_mos2_xmm0415180101_pi300-10000_pass1_cl_src10_src.reg
[Fri Mar 23 04:36:38 2012] Extracting stamp from image fullrun_mos2_xmm0415180101_pi300-10000_cl_sm2.00.img.gz, (93, 171) - (168, 246)
[Fri Mar 23 04:36:38 2012] XMMSAS bgd. selection expression = annulus(11343.543060, 18055.942993, 1087.500000, 2175.000000, X, Y)
[Fri Mar 23 04:36:38 2012] Writing fullrun_mos2_xmm0415180101_pi300-10000_pass1_cl_src10.gif
[Fri Mar 23 04:42:24 2012] Mean detx,y = (-12520.53, 7626.81) 
[Fri Mar 23 04:42:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 23 04:42:50 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 23 04:42:50 2012] Setting source spectrum file to fullrun_mos2_xmm0415180101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Mar 23 04:42:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0415180101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Mar 23 04:51:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 23 04:51:59 2012] rmf not generated due to insufficient counts
[Fri Mar 23 04:53:03 2012] Updating aperture counts using extracted products
[Fri Mar 23 04:53:03 2012] Error reading totcts from fullrun_mos2_xmm0415180101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Mar 23 04:53:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 23 04:53:03 2012] Using photon index=1.80, rate=0.0026, arf fullrun_mos2_xmm0415180101_pi300-10000_pass1_cl_src10.arf
[Fri Mar 23 04:53:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 23 04:53:03 2012] Updating source flux to 6.2e-14
[Fri Mar 23 04:53:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting