[Fri Mar 23 02:57:01 2012] Detection parameters:
  Position = (171.5, 197.5) = 18 57 17.38 -38 2 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.0 +/- 19.8
  Background counts = 91.9
  Rate = 0.007 +/- 0.0009

[Fri Mar 23 02:57:01 2012] Off-axis axis estimate = 11.76'
[Fri Mar 23 03:09:52 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 03:09:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 23 03:09:52 2012] Initial guess for spatial extent in simple fitting = 12.31"
[Fri Mar 23 03:09:52 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.105
[Fri Mar 23 03:09:52 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.31"
[Fri Mar 23 03:23:56 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Mar 23 03:23:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_src4.csv
[Fri Mar 23 03:23:56 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Mar 23 03:23:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_src4.csv
[Fri Mar 23 03:23:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 03:23:56 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Mar 23 03:23:56 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Mar 23 03:23:56 2012] Fit fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Mar 23 03:41:24 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 12.882421 pixels away
[Fri Mar 23 03:41:24 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 03:41:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 03:41:24 2012] Assessing source extent using major
[Fri Mar 23 03:41:24 2012] Source does appear to be extended
[Fri Mar 23 03:41:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 03:43:24 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 03:43:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 23 03:43:24 2012] Initial guess for spatial extent in simple fitting = 12.31"
[Fri Mar 23 03:43:24 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.105
[Fri Mar 23 03:43:24 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 12.31"
[Fri Mar 23 03:57:39 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass1_src4.ximg exists
[Fri Mar 23 03:57:39 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Mar 23 03:57:39 2012] Fit fullrun_mos1_xmm0415180101_pi300-10000_cl_pass1_src4 appears to have run properly
[Fri Mar 23 03:57:39 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Mar 23 03:57:39 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Mar 23 03:57:39 2012] Fit fullrun_mos1_xmm0415180101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Mar 23 04:11:08 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 15.319240 pixels away
[Fri Mar 23 04:11:08 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 04:11:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 04:11:08 2012] Assessing source extent using major
[Fri Mar 23 04:11:08 2012] Source does appear to be extended
[Fri Mar 23 04:11:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 04:19:28 2012] XMMSAS src. selection expression = ellipse(14869.723312, 17132.335297, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 23 04:19:28 2012] Writing source region out to fullrun_mos1_xmm0415180101_pi300-10000_pass1_cl_src8_src.reg
[Fri Mar 23 04:19:28 2012] Extracting stamp from image fullrun_mos1_xmm0415180101_pi300-10000_cl_sm2.00.img.gz, (134, 160) - (209, 235)
[Fri Mar 23 04:19:28 2012] XMMSAS bgd. selection expression = annulus(14869.723312, 17132.335297, 1087.500000, 2175.000000, X, Y)
[Fri Mar 23 04:19:28 2012] Writing fullrun_mos1_xmm0415180101_pi300-10000_pass1_cl_src8.gif
[Fri Mar 23 04:24:54 2012] Mean detx,y = (8377.43, 8827.76) 
[Fri Mar 23 04:24:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 23 04:25:11 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 23 04:25:12 2012] Setting source spectrum file to fullrun_mos1_xmm0415180101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Mar 23 04:25:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0415180101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Mar 23 04:36:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 23 04:36:04 2012] rmf not generated due to insufficient counts
[Fri Mar 23 04:53:02 2012] Updating aperture counts using extracted products
[Fri Mar 23 04:53:02 2012] Error reading totcts from fullrun_mos1_xmm0415180101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Mar 23 04:53:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 23 04:53:03 2012] Using photon index=1.80, rate=0.00659, arf fullrun_mos1_xmm0415180101_pi300-10000_pass1_cl_src8.arf
[Fri Mar 23 04:53:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 23 04:53:03 2012] Updating source flux to 1.1e-13
[Fri Mar 23 04:53:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting