[Fri Mar 23 02:57:00 2012] Detection parameters:
  Position = (284.6, 301.1) = 18 56 35.72 -37 54 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24813.2 +/- 186.6
  Background counts = 114.1
  Rate = 0.6 +/- 0.005

[Fri Mar 23 02:57:01 2012] Off-axis axis estimate = 1.02'
[Fri Mar 23 03:09:52 2012] Using EEF radius (= 6.94 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 03:09:52 2012] Initial guess for spatial extent in simple fitting = 6.94"
[Fri Mar 23 03:09:52 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.139
[Fri Mar 23 03:09:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.94"
[Fri Mar 23 03:23:56 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Mar 23 03:23:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_src1.csv
[Fri Mar 23 03:23:56 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Mar 23 03:23:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_src1.csv
[Fri Mar 23 03:23:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 03:23:56 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Mar 23 03:23:56 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Mar 23 03:23:56 2012] Fit fullrun_mos1_xmm0415180101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Mar 23 03:41:24 2012] Spatial fit model total counts = 15927.000000, observed total counts = 15927.000000
[Fri Mar 23 03:41:24 2012] Offset between fit and detection position for source 1 = 0.196766 pixels
[Fri Mar 23 03:41:24 2012] 15954.860000 total counts/ 3434.560000 bgd. counts: snr = 213.638333
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.196766 pixels
  Position = (284.4, 301.2) = 18 56 35.79 -37 54 36.7
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 12520.3 +/- 126.3
  Background counts = 3434.6
  Rate = 0.4 +/- 0.004
[Fri Mar 23 03:41:24 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 03:41:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 03:41:24 2012] Assessing source extent using major axis lower bound
[Fri Mar 23 03:41:24 2012] Source does appear to be extended
[Fri Mar 23 03:41:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 03:43:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 23 03:43:24 2012] Initial guess for spatial extent in simple fitting = 5.37"
[Fri Mar 23 03:43:24 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.997
[Fri Mar 23 03:43:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.37"
[Fri Mar 23 03:57:39 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar 23 03:57:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0415180101_pi300-10000_cl_pass1_src1.csv
[Fri Mar 23 03:57:39 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar 23 03:57:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0415180101_pi300-10000_cl_pass1_src1.csv
[Fri Mar 23 03:57:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0415180101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0415180101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 03:57:39 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar 23 03:57:39 2012] fullrun_mos1_xmm0415180101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar 23 03:57:39 2012] Fit fullrun_mos1_xmm0415180101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Mar 23 04:11:08 2012] Spatial fit model total counts = 15940.900000, observed total counts = 15927.000000
[Fri Mar 23 04:11:08 2012] Offset between fit and detection position for source 1 = 0.001097 pixels
[Fri Mar 23 04:11:08 2012] 15969.430000 total counts/ 3445.430000 bgd. counts: snr = 213.364098
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001097 pixels
  Position = (284.4, 301.2) = 18 56 35.79 -37 54 36.7
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 12524.0 +/- 126.4
  Background counts = 3445.4
  Rate = 0.4 +/- 0.004
[Fri Mar 23 04:11:08 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 04:11:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 04:11:08 2012] Assessing source extent using major axis lower bound
[Fri Mar 23 04:11:08 2012] Source does appear to be extended
[Fri Mar 23 04:11:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 04:19:28 2012] Counts = 12524.000000, rescaling region sizes by 3.000000
[Fri Mar 23 04:19:28 2012] XMMSAS src. selection expression = ellipse(24693.886200, 26151.871000, 965.464228, 965.464228, 0.000000, X, Y)
[Fri Mar 23 04:19:28 2012] Writing source region out to fullrun_mos1_xmm0415180101_pi300-10000_pass1_cl_src1_src.reg
[Fri Mar 23 04:19:28 2012] Extracting stamp from image fullrun_mos1_xmm0415180101_pi300-10000_cl_sm2.00.img.gz, (229, 246) - (340, 357)
[Fri Mar 23 04:19:28 2012] XMMSAS bgd. selection expression = annulus(24693.886200, 26151.871000, 4827.321139, 9654.642278, X, Y) && !ellipse(15040.496124, 24687.314087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16772.277481, 21630.452744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14869.723312, 17132.335297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32446.000000, 36589.682983, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 23 04:19:28 2012] Writing fullrun_mos1_xmm0415180101_pi300-10000_pass1_cl_src1.gif
[Fri Mar 23 04:19:34 2012] Mean detx,y = (-1526.62, -127.89) 
[Fri Mar 23 04:19:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 23 04:23:43 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 23 04:23:43 2012] Setting source spectrum file to fullrun_mos1_xmm0415180101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 23 04:23:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0415180101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Mar 23 04:53:02 2012] Updating aperture counts using extracted products
[Fri Mar 23 04:53:02 2012] Error reading totcts from fullrun_mos1_xmm0415180101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 23 04:53:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 23 04:53:03 2012] Using photon index=1.80, rate=0.442, arf fullrun_mos1_xmm0415180101_pi300-10000_pass1_cl_src1.arf
[Fri Mar 23 04:53:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 23 04:53:03 2012] Updating source flux to 4e-12
[Fri Mar 23 04:53:20 2012] Reading fit data from xmm0415180101/analysis//spectral/fullrun_mos1_xmm0415180101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Mar 23 04:53:20 2012] Spectral fit parameter nH value = 1.24889e+21
[Fri Mar 23 04:53:20 2012] Spectral fit parameter PhoIndex value = 8.692
[Fri Mar 23 04:53:20 2012] Failed to get F(0.3-8.0) from xmm0415180101/analysis//spectral/fullrun_mos1_xmm0415180101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Mar 23 04:53:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 23 04:53:20 2012] Using Nh = 1.2e+21, photon index=8.69, rate=0.442, arf fullrun_mos1_xmm0415180101_pi300-10000_pass1_cl_src1.arf
[Fri Mar 23 04:53:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 23 04:53:20 2012] Updating source flux to 3e-12