[Wed Sep 28 02:38:51 2011] Detection parameters:
  Position = (351.0, 428.9) = 22 1 36.90 -31 41 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 243.2 +/- 22.0
  Background counts = 34.9
  Rate = 0.008 +/- 0.0007

[Wed Sep 28 02:38:53 2011] Off-axis axis estimate = 10.20'
[Wed Sep 28 02:42:35 2011] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 02:42:35 2011] Initial guess for spatial extent in simple fitting = 11.53"
[Wed Sep 28 02:42:35 2011] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.907
[Wed Sep 28 02:42:35 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 11.53"
[Wed Sep 28 04:58:09 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src4.ximg exists
[Wed Sep 28 04:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src4.csv
[Wed Sep 28 04:58:09 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Sep 28 04:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src4.csv
[Wed Sep 28 04:58:09 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 04:58:10 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Sep 28 04:58:10 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Sep 28 04:58:10 2011] Fit fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Sep 28 05:10:54 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.811262 pixels away
[Wed Sep 28 05:10:54 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 05:10:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 05:10:54 2011] Assessing source extent using major
[Wed Sep 28 05:10:54 2011] Source does appear to be extended
[Wed Sep 28 05:10:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 05:10:54 2011] Source is confused with source 3
[Wed Sep 28 05:11:03 2011] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 05:11:03 2011] Initial guess for spatial extent in simple fitting = 11.53"
[Wed Sep 28 05:11:03 2011] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.907
[Wed Sep 28 05:11:03 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 11.53"
[Wed Sep 28 07:20:14 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src4.ximg exists
[Wed Sep 28 07:20:14 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src4.csv
[Wed Sep 28 07:20:14 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Sep 28 07:20:14 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src4.csv
[Wed Sep 28 07:20:14 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 07:20:15 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Sep 28 07:20:15 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Sep 28 07:20:15 2011] Fit fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Sep 28 07:25:58 2011] Spatial fit model total counts = 821.523000, observed total counts = 826.000000
[Wed Sep 28 07:25:58 2011] Offset between fit and detection position for source 4 = 1.714062 pixels
[Wed Sep 28 07:25:58 2011] Warning, changing simple spatial fit ID from 4 to 3
[Wed Sep 28 07:25:58 2011] 483.151000 total counts/ 289.823000 bgd. counts: snr = 11.356077
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.714062 pixels
  Position = (350.3, 427.4) = 22 1 37.15 -31 41 56.7
  Extent = 8.7 (7.1-11.0)", rotation angle = 0
  Source counts = 193.3 +/- 22.0
  Background counts = 289.8
  Rate = 0.006 +/- 0.0007
[Wed Sep 28 07:25:58 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 07:25:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 07:25:58 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 07:25:58 2011] Source does appear to be extended
[Wed Sep 28 07:25:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 07:26:07 2011] XMMSAS src. selection expression = ellipse(30425.293200, 37134.828000, 523.137615, 523.137615, 0.000000, X, Y)
[Wed Sep 28 07:26:07 2011] Writing source region out to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src4_src.reg
[Wed Sep 28 07:26:07 2011] Extracting stamp from image fullrun_pn_xmm0414580101_pi300-10000_cl_sm2.00.img.gz, (320, 397) - (380, 457)
[Wed Sep 28 07:26:07 2011] XMMSAS bgd. selection expression = annulus(30425.293200, 37134.828000, 871.896025, 1743.792050, X, Y) && !ellipse(30610.717200, 37504.738000, 1224.248035, 403.107212, 117.227000, X, Y) && !ellipse(29913.434666, 36136.370883, 1579.600045, 483.633515, 118.371673, X, Y) && !ellipse(29677.142000, 35672.411400, 1992.160057, 433.802412, 117.215000, X, Y) && !ellipse(29629.623898, 35730.806370, 1688.646999, 894.865646, 90.000000, X, Y) && !ellipse(29019.119534, 34432.501569, 1579.600045, 367.363687, 118.898658, X, Y)
[Wed Sep 28 07:26:07 2011] Writing fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src4.gif
[Wed Sep 28 07:33:39 2011] Mean detx,y = (15.96, 13516.38) 
[Wed Sep 28 07:33:41 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 07:33:55 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 07:33:56 2011] Setting source spectrum file to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Sep 28 07:33:56 2011] Setting bgd. spectrum file to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Sep 28 10:26:24 2011] Updating aperture counts using extracted products
[Wed Sep 28 10:26:25 2011] Error reading totcts from fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Sep 28 10:26:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 10:26:28 2011] Using photon index=1.80, rate=0.00611, arf fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src4.arf
[Wed Sep 28 10:26:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 10:26:28 2011] Updating source flux to 4.7e-14
[Wed Sep 28 10:28:02 2011] Flag c found in src. 4 procflags, skipping spectral fitting