[Wed Sep 28 02:38:52 2011] Detection parameters:
  Position = (269.6, 274.4) = 22 2 4.68 -31 52 56.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.8 +/- 20.1
  Background counts = 50.2
  Rate = 0.005 +/- 0.0009

[Wed Sep 28 02:38:53 2011] Off-axis axis estimate = 2.73'
[Wed Sep 28 02:42:35 2011] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 02:42:35 2011] Initial guess for spatial extent in simple fitting = 7.79"
[Wed Sep 28 02:42:35 2011] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.095
[Wed Sep 28 02:42:35 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 7.79"
[Wed Sep 28 04:58:09 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src32.ximg exists
[Wed Sep 28 04:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src32.csv
[Wed Sep 28 04:58:09 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src32_1.ximg exists
[Wed Sep 28 04:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src32.csv
[Wed Sep 28 04:58:09 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 04:58:10 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Wed Sep 28 04:58:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Wed Sep 28 04:58:10 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Wed Sep 28 04:58:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Wed Sep 28 04:58:10 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 05:10:54 2011] Warning, spatial fit 32 centroid is now closest to src. 31
[Wed Sep 28 05:10:54 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 05:10:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 05:10:54 2011] Assessing source extent using major
[Wed Sep 28 05:10:54 2011] Source does appear to be extended
[Wed Sep 28 05:10:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 05:10:54 2011] Source is confused with source 31
[Wed Sep 28 05:11:03 2011] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 05:11:03 2011] Initial guess for spatial extent in simple fitting = 7.79"
[Wed Sep 28 05:11:03 2011] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.095
[Wed Sep 28 05:11:03 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 7.79"
[Wed Sep 28 07:20:14 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src30.ximg exists
[Wed Sep 28 07:20:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src30.csv
[Wed Sep 28 07:20:14 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src30_1.ximg exists
[Wed Sep 28 07:20:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src30.csv
[Wed Sep 28 07:20:14 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 07:20:17 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Wed Sep 28 07:20:17 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Wed Sep 28 07:20:17 2011] Fit fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Wed Sep 28 07:25:58 2011] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 52.627133 pixels away
[Wed Sep 28 07:25:58 2011] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 16.021829 pixels away
[Wed Sep 28 07:25:58 2011] Source 32 is offset by -5.752378 and -7.805552 pixels which is larger than
2 X fitted extent = 3.294304 x 3.294304, not incorporating fit results
[Wed Sep 28 07:25:58 2011] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 12.664095 pixels away
[Wed Sep 28 07:25:58 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 07:25:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 07:25:58 2011] Assessing source extent using major
[Wed Sep 28 07:25:58 2011] Source does appear to be extended
[Wed Sep 28 07:25:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 07:26:08 2011] XMMSAS src. selection expression = ellipse(23402.455139, 23820.755005, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Sep 28 07:26:08 2011] Writing source region out to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src32_src.reg
[Wed Sep 28 07:26:08 2011] Extracting stamp from image fullrun_pn_xmm0414580101_pi300-10000_cl_sm2.00.img.gz, (232, 237) - (307, 312)
[Wed Sep 28 07:26:08 2011] XMMSAS bgd. selection expression = annulus(23402.455139, 23820.755005, 1087.500000, 2175.000000, X, Y) && !ellipse(24152.382320, 24834.003800, 1435.435241, 1435.435241, 0.000000, X, Y) && !ellipse(25985.954113, 28448.725268, 2458.880071, 450.384439, 117.687297, X, Y) && !ellipse(25395.275800, 27277.126680, 1536.792044, 353.102410, 117.100300, X, Y) && !ellipse(25213.188000, 27082.468000, 1137.904033, 1137.904033, 0.000000, X, Y) && !ellipse(22875.997345, 23991.884918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25004.794800, 22947.426000, 1258.455266, 1258.455266, 0.000000, X, Y)
[Wed Sep 28 07:26:08 2011] Writing fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src32.gif
[Wed Sep 28 07:56:36 2011] Mean detx,y = (177.76, -1442.07) 
[Wed Sep 28 07:56:40 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 07:57:00 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 07:57:01 2011] Setting source spectrum file to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Sep 28 07:57:01 2011] Setting bgd. spectrum file to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed Sep 28 09:36:47 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Sep 28 09:36:47 2011] rmf not generated due to insufficient counts
[Wed Sep 28 10:26:26 2011] Updating aperture counts using extracted products
[Wed Sep 28 10:26:26 2011] Error reading totcts from fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Sep 28 10:26:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 10:26:28 2011] Using photon index=1.80, rate=0.00512, arf fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src32.arf
[Wed Sep 28 10:26:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 10:26:28 2011] Updating source flux to 1.8e-14
[Wed Sep 28 10:28:03 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting