[Wed Sep 28 02:38:52 2011] Detection parameters:
  Position = (263.5, 276.3) = 22 2 6.75 -31 52 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.7 +/- 16.8
  Background counts = 50.2
  Rate = 0.005 +/- 0.0009

[Wed Sep 28 02:38:53 2011] Off-axis axis estimate = 3.00'
[Wed Sep 28 02:42:35 2011] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 02:42:35 2011] Initial guess for spatial extent in simple fitting = 7.93"
[Wed Sep 28 02:42:35 2011] source mask rpix=1.8, npix_max = 21, mask sum = 11, frac = 0.510
[Wed Sep 28 02:42:35 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 7.93"
[Wed Sep 28 04:58:09 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src31.ximg exists
[Wed Sep 28 04:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src31.csv
[Wed Sep 28 04:58:09 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src31_1.ximg exists
[Wed Sep 28 04:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src31.csv
[Wed Sep 28 04:58:09 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 04:58:10 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Wed Sep 28 04:58:10 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Wed Sep 28 04:58:10 2011] Fit fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Wed Sep 28 05:10:54 2011] Source 31 is offset by -5.628237 and -7.963254 pixels which is larger than
2 X fitted extent = 2.695697 x 2.695697, not incorporating fit results
[Wed Sep 28 05:10:54 2011] Source 31 is offset by 0.797096 and 7.755459 pixels which is larger than
2 X fitted extent = 7.164828 x 7.164828, not incorporating fit results
[Wed Sep 28 05:10:54 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 05:10:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 05:10:54 2011] Assessing source extent using major
[Wed Sep 28 05:10:54 2011] Source does appear to be extended
[Wed Sep 28 05:10:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 05:10:54 2011] Source is confused with source 32
[Wed Sep 28 05:11:03 2011] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 05:11:03 2011] Initial guess for spatial extent in simple fitting = 7.93"
[Wed Sep 28 05:11:03 2011] source mask rpix=1.8, npix_max = 21, mask sum = 11, frac = 0.510
[Wed Sep 28 05:11:03 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 7.93"
[Wed Sep 28 07:20:14 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src29.ximg exists
[Wed Sep 28 07:20:14 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src29_1.ximg exists
[Wed Sep 28 07:20:14 2011] Fit fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src29 appears to have run properly
[Wed Sep 28 07:20:16 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Wed Sep 28 07:20:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Sep 28 07:20:16 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Wed Sep 28 07:20:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Sep 28 07:20:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 07:25:58 2011] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 49.815793 pixels away
[Wed Sep 28 07:25:58 2011] Warning, spatial fit 29 centroid is now closest to src. 32
[Wed Sep 28 07:25:58 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 07:25:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 07:25:58 2011] Assessing source extent using major
[Wed Sep 28 07:25:58 2011] Source does appear to be extended
[Wed Sep 28 07:25:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 07:26:08 2011] XMMSAS src. selection expression = ellipse(22875.997345, 23991.884918, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Sep 28 07:26:08 2011] Writing source region out to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src31_src.reg
[Wed Sep 28 07:26:08 2011] Extracting stamp from image fullrun_pn_xmm0414580101_pi300-10000_cl_sm2.00.img.gz, (226, 239) - (301, 314)
[Wed Sep 28 07:26:08 2011] XMMSAS bgd. selection expression = annulus(22875.997345, 23991.884918, 1087.500000, 2175.000000, X, Y) && !ellipse(24152.382320, 24834.003800, 1435.435241, 1435.435241, 0.000000, X, Y) && !ellipse(25985.954113, 28448.725268, 2458.880071, 450.384439, 117.687297, X, Y) && !ellipse(25395.275800, 27277.126680, 1536.792044, 353.102410, 117.100300, X, Y) && !ellipse(25213.188000, 27082.468000, 1137.904033, 1137.904033, 0.000000, X, Y) && !ellipse(23402.455139, 23820.755005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25004.794800, 22947.426000, 1258.455266, 1258.455266, 0.000000, X, Y)
[Wed Sep 28 07:26:08 2011] Writing fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src31.gif
[Wed Sep 28 07:56:01 2011] Mean detx,y = (705.36, -1639.46) 
[Wed Sep 28 07:56:04 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 07:56:20 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 07:56:21 2011] Setting source spectrum file to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed Sep 28 07:56:21 2011] Setting bgd. spectrum file to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Wed Sep 28 09:33:31 2011] Not generating rmf since there are only 88 counts
[Wed Sep 28 09:33:31 2011] rmf not generated due to insufficient counts
[Wed Sep 28 10:26:26 2011] Updating aperture counts using extracted products
[Wed Sep 28 10:26:26 2011] Error reading totcts from fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed Sep 28 10:26:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 10:26:28 2011] Using photon index=1.80, rate=0.00494, arf fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src31.arf
[Wed Sep 28 10:26:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 10:26:28 2011] Updating source flux to 1.7e-14
[Wed Sep 28 10:28:03 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting