[Wed Sep 28 02:38:52 2011] Detection parameters:
  Position = (302.2, 332.9) = 22 1 53.53 -31 48 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 253.8 +/- 22.5
  Background counts = 46.5
  Rate = 0.01 +/- 0.0009

[Wed Sep 28 02:38:53 2011] Off-axis axis estimate = 2.51'
[Wed Sep 28 02:42:35 2011] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 02:42:35 2011] Initial guess for spatial extent in simple fitting = 7.68"
[Wed Sep 28 02:42:35 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Wed Sep 28 02:42:35 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 7.68"
[Wed Sep 28 04:58:09 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src23.ximg exists
[Wed Sep 28 04:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src23.csv
[Wed Sep 28 04:58:09 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src23_1.ximg exists
[Wed Sep 28 04:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src23.csv
[Wed Sep 28 04:58:09 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 04:58:10 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Wed Sep 28 04:58:10 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Sep 28 04:58:10 2011] Fit fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Wed Sep 28 05:10:54 2011] Spatial fit model total counts = 1092.350000, observed total counts = 993.000000
[Wed Sep 28 05:10:54 2011] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Sep 28 05:10:54 2011] Spatial fit model total counts = 1068.240000, observed total counts = 1073.000000
[Wed Sep 28 05:10:54 2011] Offset between fit and detection position for source 23 = 6.079366 pixels
[Wed Sep 28 05:10:54 2011] 977.025000 total counts/ 476.498000 bgd. counts: snr = 22.929626
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 6.079366 pixels
  Position = (305.1, 338.2) = 22 1 52.56 -31 48 24.6
  Extent = 15.4 (15.3-30.7)", rotation angle = 0
  Source counts = 500.5 +/- 31.3
  Background counts = 476.5
  Rate = 0.02 +/- 0.001
[Wed Sep 28 05:10:54 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 05:10:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 05:10:54 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 05:10:54 2011] Source does appear to be extended
[Wed Sep 28 05:10:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 05:10:54 2011] Source is confused with source 20
[Wed Sep 28 05:11:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 05:11:03 2011] Initial guess for spatial extent in simple fitting = 15.37"
[Wed Sep 28 05:11:03 2011] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.984
[Wed Sep 28 05:11:03 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 15.37"
[Wed Sep 28 07:20:14 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src22.ximg exists
[Wed Sep 28 07:20:14 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src22_1.ximg exists
[Wed Sep 28 07:20:14 2011] Fit fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src22 appears to have run properly
[Wed Sep 28 07:20:16 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Wed Sep 28 07:20:16 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Wed Sep 28 07:20:16 2011] Fit fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Wed Sep 28 07:25:58 2011] Spatial fit model total counts = 1558.300000, observed total counts = 1556.000000
[Wed Sep 28 07:25:58 2011] Offset between fit and detection position for source 23 = 1.804830 pixels
[Wed Sep 28 07:25:58 2011] 1557.375000 total counts/ 962.945000 bgd. counts: snr = 19.155786
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.804830 pixels
  Position = (304.0, 336.8) = 22 1 52.92 -31 48 31.0
  Extent = 30.7 (30.2-61.5)" x 5.0 (4.3-5.5)", rotation angle = 117 (116-119) degrees
  Source counts = 594.4 +/- 39.5
  Background counts = 962.9
  Rate = 0.02 +/- 0.001
[Wed Sep 28 07:25:58 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 07:25:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 07:25:58 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 07:25:58 2011] Source does appear to be extended
[Wed Sep 28 07:25:58 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 5.49
[Wed Sep 28 07:25:58 2011] Source is asymmetric
[Wed Sep 28 07:26:08 2011] XMMSAS src. selection expression = ellipse(26400.356800, 29250.461200, 1844.160053, 298.003209, 117.324000, X, Y)
[Wed Sep 28 07:26:08 2011] Writing source region out to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src23_src.reg
[Wed Sep 28 07:26:08 2011] Extracting stamp from image fullrun_pn_xmm0414580101_pi300-10000_cl_sm2.00.img.gz, (198, 231) - (410, 443)
[Wed Sep 28 07:26:08 2011] XMMSAS bgd. selection expression = annulus(26400.356800, 29250.461200, 3073.600088, 6147.200177, X, Y) && !ellipse(24152.382320, 24834.003800, 1435.435241, 1435.435241, 0.000000, X, Y) && !ellipse(29913.434666, 36136.370883, 1579.600045, 483.633515, 118.371673, X, Y) && !ellipse(25693.639221, 36024.318390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29677.142000, 35672.411400, 1992.160057, 433.802412, 117.215000, X, Y) && !ellipse(29629.623898, 35730.806370, 1688.646999, 894.865646, 90.000000, X, Y) && !ellipse(29019.119534, 34432.501569, 1579.600045, 367.363687, 118.898658, X, Y) && !ellipse(28648.267900, 33688.385000, 1579.600045, 419.548812, 117.120000, X, Y) && !ellipse(28173.746000, 32666.652000, 1195.408034, 1195.408034, 0.000000, X, Y) && !ellipse(27951.946048, 32335.244059, 2465.872071, 485.704108, 116.434678, X, Y) && !ellipse(27810.768000, 32028.876000, 1258.832036, 1258.832036, 0.000000, X, Y) && !ellipse(31192.321760, 31656.237800, 858.032025, 858.032025, 0.000000, X, Y) && !ellipse(27408.840000, 31188.410000, 1362.592039, 1362.592039, 0.000000, X, Y) && !ellipse(26930.100000, 30234.748000, 787.185623, 787.185623, 0.000000, X, Y) && !ellipse(26521.756000, 29503.690000, 1299.480037, 1299.480037, 0.000000, X, Y) && !ellipse(25985.954113, 28448.725268, 2458.880071, 450.384439, 117.687297, X, Y) && !ellipse(25395.275800, 27277.126680, 1536.792044, 353.102410, 117.100300, X, Y) && !ellipse(25213.188000, 27082.468000, 1137.904033, 1137.904033, 0.000000, X, Y) && !ellipse(30224.433300, 25422.340400, 348.217610, 348.217610, 0.000000, X, Y) && !ellipse(31469.998800, 25327.622200, 412.828812, 412.828812, 0.000000, X, Y) && !ellipse(22875.997345, 23991.884918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23402.455139, 23820.755005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30717.711334, 23360.720734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25004.794800, 22947.426000, 1258.455266, 1258.455266, 0.000000, X, Y)
[Wed Sep 28 07:26:08 2011] Writing fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src23.gif
[Wed Sep 28 07:51:10 2011] Mean detx,y = (-5.54, 4645.75) 
[Wed Sep 28 07:51:14 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 07:52:10 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 07:52:10 2011] Setting source spectrum file to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Sep 28 07:52:10 2011] Setting bgd. spectrum file to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed Sep 28 10:26:26 2011] Updating aperture counts using extracted products
[Wed Sep 28 10:26:26 2011] Error reading totcts from fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Sep 28 10:26:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 10:26:28 2011] Using photon index=1.80, rate=0.0188, arf fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src23.arf
[Wed Sep 28 10:26:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 10:26:28 2011] Updating source flux to 7.8e-14
[Wed Sep 28 10:28:03 2011] Flag p found in src. 23 procflags, skipping spectral fitting
[Wed Sep 28 10:28:03 2011] Flag c found in src. 23 procflags, skipping spectral fitting