[Wed Sep 28 02:38:52 2011] Detection parameters:
  Position = (313.3, 354.1) = 22 1 49.76 -31 47 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 235.8 +/- 21.7
  Background counts = 42.9
  Rate = 0.01 +/- 0.001

[Wed Sep 28 02:38:53 2011] Off-axis axis estimate = 4.18'
[Wed Sep 28 02:42:35 2011] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 02:42:35 2011] Initial guess for spatial extent in simple fitting = 8.52"
[Wed Sep 28 02:42:35 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.035
[Wed Sep 28 02:42:35 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 8.52"
[Wed Sep 28 04:58:09 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src18.ximg exists
[Wed Sep 28 04:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src18.csv
[Wed Sep 28 04:58:09 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Sep 28 04:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src18.csv
[Wed Sep 28 04:58:09 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 04:58:10 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Sep 28 04:58:10 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Sep 28 04:58:10 2011] Fit fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Sep 28 05:10:54 2011] Spatial fit model total counts = 1065.660000, observed total counts = 1068.000000
[Wed Sep 28 05:10:54 2011] Offset between fit and detection position for source 18 = 5.484747 pixels
[Wed Sep 28 05:10:54 2011] 1002.133000 total counts/ 434.326000 bgd. counts: snr = 27.245377
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 5.484747 pixels
  Position = (315.6, 359.0) = 22 1 48.96 -31 46 54.0
  Extent = 17.0 (15.6-34.1)", rotation angle = 0
  Source counts = 567.8 +/- 31.7
  Background counts = 434.3
  Rate = 0.02 +/- 0.001
[Wed Sep 28 05:10:54 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 05:10:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 05:10:54 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 05:10:54 2011] Source does appear to be extended
[Wed Sep 28 05:10:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 05:10:54 2011] Source is confused with source 16
[Wed Sep 28 05:11:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 05:11:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 05:11:03 2011] Initial guess for spatial extent in simple fitting = 17.03"
[Wed Sep 28 05:11:03 2011] source mask rpix=3.9, npix_max = 77, mask sum = 72, frac = 0.923
[Wed Sep 28 05:11:03 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 17.03"
[Wed Sep 28 07:20:14 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src17.ximg exists
[Wed Sep 28 07:20:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src17.csv
[Wed Sep 28 07:20:14 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Sep 28 07:20:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src17.csv
[Wed Sep 28 07:20:14 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 07:20:16 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Sep 28 07:20:16 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Sep 28 07:20:16 2011] Fit fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Sep 28 07:25:58 2011] Warning, spatial fit 17 centroid is now closest to src. 20
[Wed Sep 28 07:25:58 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 07:25:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 07:25:58 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 07:25:58 2011] Source does appear to be extended
[Wed Sep 28 07:25:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 07:26:08 2011] XMMSAS src. selection expression = ellipse(27408.840000, 31188.410000, 1021.944029, 1021.944029, 0.000000, X, Y)
[Wed Sep 28 07:26:08 2011] Writing source region out to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src18_src.reg
[Wed Sep 28 07:26:08 2011] Extracting stamp from image fullrun_pn_xmm0414580101_pi300-10000_cl_sm2.00.img.gz, (257, 300) - (374, 418)
[Wed Sep 28 07:26:08 2011] XMMSAS bgd. selection expression = annulus(27408.840000, 31188.410000, 1703.240049, 3406.480098, X, Y) && !ellipse(29913.434666, 36136.370883, 1579.600045, 483.633515, 118.371673, X, Y) && !ellipse(29677.142000, 35672.411400, 1992.160057, 433.802412, 117.215000, X, Y) && !ellipse(29629.623898, 35730.806370, 1688.646999, 894.865646, 90.000000, X, Y) && !ellipse(29019.119534, 34432.501569, 1579.600045, 367.363687, 118.898658, X, Y) && !ellipse(28648.267900, 33688.385000, 1579.600045, 419.548812, 117.120000, X, Y) && !ellipse(28173.746000, 32666.652000, 1195.408034, 1195.408034, 0.000000, X, Y) && !ellipse(27951.946048, 32335.244059, 2465.872071, 485.704108, 116.434678, X, Y) && !ellipse(27810.768000, 32028.876000, 1258.832036, 1258.832036, 0.000000, X, Y) && !ellipse(31192.321760, 31656.237800, 858.032025, 858.032025, 0.000000, X, Y) && !ellipse(26930.100000, 30234.748000, 787.185623, 787.185623, 0.000000, X, Y) && !ellipse(26521.756000, 29503.690000, 1299.480037, 1299.480037, 0.000000, X, Y) && !ellipse(25985.954113, 28448.725268, 2458.880071, 450.384439, 117.687297, X, Y) && !ellipse(26400.356800, 29250.461200, 2458.880071, 397.337611, 117.324000, X, Y) && !ellipse(25395.275800, 27277.126680, 1536.792044, 353.102410, 117.100300, X, Y) && !ellipse(25213.188000, 27082.468000, 1137.904033, 1137.904033, 0.000000, X, Y)
[Wed Sep 28 07:26:08 2011] Writing fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src18.gif
[Wed Sep 28 07:46:31 2011] Mean detx,y = (7.15, 6825.35) 
[Wed Sep 28 07:46:34 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 07:47:08 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 07:47:08 2011] Setting source spectrum file to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Sep 28 07:47:08 2011] Setting bgd. spectrum file to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Sep 28 10:26:25 2011] Updating aperture counts using extracted products
[Wed Sep 28 10:26:25 2011] Error reading totcts from fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Sep 28 10:26:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 10:26:28 2011] Using photon index=1.80, rate=0.0179, arf fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src18.arf
[Wed Sep 28 10:26:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 10:26:28 2011] Updating source flux to 7.8e-14
[Wed Sep 28 10:28:03 2011] Flag c found in src. 18 procflags, skipping spectral fitting