[Wed Sep 28 02:38:51 2011] Detection parameters:
  Position = (278.2, 286.0) = 22 2 1.74 -31 52 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106791.1 +/- 387.5
  Background counts = 50.9
  Rate = 4 +/- 0.01

[Wed Sep 28 02:38:53 2011] Off-axis axis estimate = 1.72'
[Wed Sep 28 02:42:35 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 02:42:35 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Sep 28 02:42:35 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Wed Sep 28 02:42:35 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Sep 28 04:58:09 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep 28 04:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 04:58:09 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep 28 04:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 04:58:09 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 04:58:10 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 04:58:10 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 04:58:10 2011] Fit fullrun_pn_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 05:10:54 2011] Spatial fit model total counts = 95080.200000, observed total counts = 95044.000000
[Wed Sep 28 05:10:54 2011] Offset between fit and detection position for source 1 = 0.004357 pixels
[Wed Sep 28 05:10:54 2011] 95272.600000 total counts/ 18554.600000 bgd. counts: snr = 563.211449
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004357 pixels
  Position = (278.2, 286.0) = 22 2 1.74 -31 52 11.8
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 76718.0 +/- 308.7
  Background counts = 18554.6
  Rate = 2 +/- 0.01
[Wed Sep 28 05:10:54 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 05:10:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 05:10:54 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 05:10:54 2011] Source does appear to be extended
[Wed Sep 28 05:10:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 05:11:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 05:11:03 2011] Initial guess for spatial extent in simple fitting = 5.98"
[Wed Sep 28 05:11:03 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.138
[Wed Sep 28 05:11:03 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.98"
[Wed Sep 28 07:20:14 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep 28 07:20:14 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 07:20:14 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep 28 07:20:14 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 07:20:14 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 07:20:14 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 07:20:14 2011] fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 07:20:15 2011] Fit fullrun_pn_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 07:25:58 2011] Spatial fit model total counts = 95080.200000, observed total counts = 95044.000000
[Wed Sep 28 07:25:58 2011] Offset between fit and detection position for source 1 = 0.000000 pixels
[Wed Sep 28 07:25:58 2011] 95272.600000 total counts/ 18554.600000 bgd. counts: snr = 563.211449
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (278.2, 286.0) = 22 2 1.74 -31 52 11.8
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 76718.0 +/- 308.7
  Background counts = 18554.6
  Rate = 2 +/- 0.01
[Wed Sep 28 07:25:58 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 07:25:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 07:25:58 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 07:25:58 2011] Source does appear to be extended
[Wed Sep 28 07:25:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 07:26:07 2011] Counts = 76718.000000, rescaling region sizes by 3.000000
[Wed Sep 28 07:26:07 2011] XMMSAS src. selection expression = ellipse(24152.382320, 24834.003800, 1076.576431, 1076.576431, 0.000000, X, Y)
[Wed Sep 28 07:26:07 2011] Writing source region out to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep 28 07:26:07 2011] Extracting stamp from image fullrun_pn_xmm0414580101_pi300-10000_cl_sm2.00.img.gz, (216, 224) - (340, 348)
[Wed Sep 28 07:26:07 2011] XMMSAS bgd. selection expression = annulus(24152.382320, 24834.003800, 5382.882155, 10765.764310, X, Y) && !ellipse(29913.434666, 36136.370883, 1579.600045, 483.633515, 118.371673, X, Y) && !ellipse(25693.639221, 36024.318390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29677.142000, 35672.411400, 1992.160057, 433.802412, 117.215000, X, Y) && !ellipse(29629.623898, 35730.806370, 1688.646999, 894.865646, 90.000000, X, Y) && !ellipse(29019.119534, 34432.501569, 1579.600045, 367.363687, 118.898658, X, Y) && !ellipse(28648.267900, 33688.385000, 1579.600045, 419.548812, 117.120000, X, Y) && !ellipse(33264.293260, 33051.989400, 405.444812, 405.444812, 0.000000, X, Y) && !ellipse(28173.746000, 32666.652000, 1195.408034, 1195.408034, 0.000000, X, Y) && !ellipse(27951.946048, 32335.244059, 2465.872071, 485.704108, 116.434678, X, Y) && !ellipse(27810.768000, 32028.876000, 1258.832036, 1258.832036, 0.000000, X, Y) && !ellipse(31192.321760, 31656.237800, 858.032025, 858.032025, 0.000000, X, Y) && !ellipse(27408.840000, 31188.410000, 1362.592039, 1362.592039, 0.000000, X, Y) && !ellipse(13213.007599, 30141.216858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26930.100000, 30234.748000, 787.185623, 787.185623, 0.000000, X, Y) && !ellipse(26521.756000, 29503.690000, 1299.480037, 1299.480037, 0.000000, X, Y) && !ellipse(25985.954113, 28448.725268, 2458.880071, 450.384439, 117.687297, X, Y) && !ellipse(26400.356800, 29250.461200, 2458.880071, 397.337611, 117.324000, X, Y) && !ellipse(19634.493600, 27952.972600, 574.170417, 574.170417, 0.000000, X, Y) && !ellipse(25395.275800, 27277.126680, 1536.792044, 353.102410, 117.100300, X, Y) && !ellipse(25213.188000, 27082.468000, 1137.904033, 1137.904033, 0.000000, X, Y) && !ellipse(30224.433300, 25422.340400, 348.217610, 348.217610, 0.000000, X, Y) && !ellipse(31469.998800, 25327.622200, 412.828812, 412.828812, 0.000000, X, Y) && !ellipse(34963.174866, 24217.620819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22875.997345, 23991.884918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23402.455139, 23820.755005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30717.711334, 23360.720734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15769.280980, 22715.289800, 429.942438, 429.942438, 0.000000, X, Y) && !ellipse(34132.636566, 22436.098816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25004.794800, 22947.426000, 1258.455266, 1258.455266, 0.000000, X, Y) && !ellipse(29226.350400, 21666.114400, 391.998098, 391.998098, 0.000000, X, Y) && !ellipse(31752.326000, 21459.364200, 407.335212, 407.335212, 0.000000, X, Y) && !ellipse(32139.397217, 21125.122345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20375.835907, 20291.902466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32059.948120, 14032.762497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31225.217000, 20028.680240, 558.588816, 368.128011, 24.328300, X, Y) && !ellipse(16209.893200, 18095.276600, 299.902409, 299.902409, 0.000000, X, Y) && !ellipse(14898.636560, 14359.577800, 564.976016, 402.197612, 217.925396, X, Y) && !ellipse(17766.487200, 17348.419200, 530.573615, 530.573615, 0.000000, X, Y) && !ellipse(23907.457642, 17346.316055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34452.333602, 16922.692017, 605.638868, 259.613322, 108.274555, X, Y) && !ellipse(23815.251129, 16483.228424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23212.102385, 15867.446359, 813.816870, 553.321102, -0.000000, X, Y) && !ellipse(20570.165466, 15085.206818, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 07:26:07 2011] Writing fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src1.gif
[Wed Sep 28 07:26:35 2011] Mean detx,y = (23.89, -278.89) 
[Wed Sep 28 07:26:42 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 07:30:44 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 07:30:44 2011] Setting source spectrum file to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 07:30:44 2011] Setting bgd. spectrum file to fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep 28 10:26:24 2011] Updating aperture counts using extracted products
[Wed Sep 28 10:26:24 2011] Error reading totcts from fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 10:26:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 10:26:28 2011] Using photon index=1.80, rate=2.42, arf fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 10:26:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 10:26:28 2011] Updating source flux to 7.5e-12
[Wed Sep 28 10:33:51 2011] Reading fit data from xmm0414580101/analysis//spectral/fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Sep 28 10:33:51 2011] Spectral fit parameter nH value = 7.96443e+22
[Wed Sep 28 10:33:51 2011] Spectral fit parameter PhoIndex value = 1.65996
[Wed Sep 28 10:33:51 2011] Failed to get F(0.3-8.0) from xmm0414580101/analysis//spectral/fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 10:33:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 10:33:51 2011] Using Nh = 8e+22, photon index=1.66, rate=2.42, arf fullrun_pn_xmm0414580101_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 10:33:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 10:33:51 2011] Updating source flux to 2.2e-11