[Wed Sep 28 02:39:37 2011] Detection parameters:
  Position = (278.2, 286.0) = 22 2 1.71 -31 52 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31691.2 +/- 212.7
  Background counts = 158.3
  Rate = 2 +/- 0.01

[Wed Sep 28 02:39:37 2011] Off-axis axis estimate = 1.72'
[Wed Sep 28 05:02:43 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 05:02:43 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Sep 28 05:02:43 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Wed Sep 28 05:02:43 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Sep 28 05:10:43 2011] fullrun_mos2_xmm0414580101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep 28 05:10:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414580101_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 05:10:43 2011] fullrun_mos2_xmm0414580101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep 28 05:10:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414580101_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 05:10:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414580101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414580101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 05:10:43 2011] fullrun_mos2_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 05:10:43 2011] fullrun_mos2_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 05:10:43 2011] Fit fullrun_mos2_xmm0414580101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 05:10:55 2011] Spatial fit model total counts = 18088.100000, observed total counts = 18088.000000
[Wed Sep 28 05:10:55 2011] Offset between fit and detection position for source 1 = 0.050518 pixels
[Wed Sep 28 05:10:55 2011] 18160.540000 total counts/ 3815.940000 bgd. counts: snr = 232.213612
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.050518 pixels
  Position = (278.3, 286.1) = 22 2 1.71 -31 52 11.5
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 14344.6 +/- 134.8
  Background counts = 3815.9
  Rate = 1 +/- 0.01
[Wed Sep 28 05:10:55 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 05:10:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 05:10:55 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 05:10:55 2011] Source does appear to be extended
[Wed Sep 28 05:10:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 07:21:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 07:21:19 2011] Initial guess for spatial extent in simple fitting = 5.56"
[Wed Sep 28 07:21:19 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.264
[Wed Sep 28 07:21:19 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.56"
[Wed Sep 28 07:25:49 2011] fullrun_mos2_xmm0414580101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep 28 07:25:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414580101_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 07:25:49 2011] fullrun_mos2_xmm0414580101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep 28 07:25:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414580101_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 07:25:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414580101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414580101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 07:25:49 2011] fullrun_mos2_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 07:25:50 2011] fullrun_mos2_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 07:25:50 2011] Fit fullrun_mos2_xmm0414580101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 07:25:59 2011] Spatial fit model total counts = 18088.000000, observed total counts = 18088.000000
[Wed Sep 28 07:25:59 2011] Offset between fit and detection position for source 1 = 0.000011 pixels
[Wed Sep 28 07:25:59 2011] 18160.540000 total counts/ 3816.940000 bgd. counts: snr = 232.167005
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000011 pixels
  Position = (278.3, 286.1) = 22 2 1.71 -31 52 11.5
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 14343.6 +/- 134.8
  Background counts = 3816.9
  Rate = 1 +/- 0.01
[Wed Sep 28 07:25:59 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 07:25:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 07:25:59 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 07:25:59 2011] Source does appear to be extended
[Wed Sep 28 07:25:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 10:10:43 2011] Counts = 14343.600000, rescaling region sizes by 3.000000
[Wed Sep 28 10:10:43 2011] XMMSAS src. selection expression = ellipse(24160.264000, 24839.629600, 1001.088029, 1001.088029, 0.000000, X, Y)
[Wed Sep 28 10:10:43 2011] Writing source region out to fullrun_mos2_xmm0414580101_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep 28 10:10:43 2011] Extracting stamp from image fullrun_mos2_xmm0414580101_pi300-10000_cl_sm2.00.img.gz, (221, 229) - (336, 344)
[Wed Sep 28 10:10:43 2011] XMMSAS bgd. selection expression = annulus(24160.264000, 24839.629600, 5005.440144, 10010.880288, X, Y) && !ellipse(23768.448273, 25901.751038, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 10:10:43 2011] Writing fullrun_mos2_xmm0414580101_pi300-10000_pass1_cl_src1.gif
[Wed Sep 28 10:10:47 2011] Mean detx,y = (140.35, 128.63) 
[Wed Sep 28 10:10:48 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 10:14:00 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 10:14:01 2011] Setting source spectrum file to fullrun_mos2_xmm0414580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 10:14:01 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0414580101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep 28 10:26:29 2011] Updating aperture counts using extracted products
[Wed Sep 28 10:26:29 2011] Error reading totcts from fullrun_mos2_xmm0414580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 10:26:29 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 10:26:29 2011] Using photon index=1.80, rate=1.06, arf fullrun_mos2_xmm0414580101_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 10:26:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 10:26:29 2011] Updating source flux to 1.1e-11
[Wed Sep 28 10:28:02 2011] Reading fit data from xmm0414580101/analysis//spectral/fullrun_mos2_xmm0414580101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Sep 28 10:28:02 2011] Spectral fit parameter nH value = 8.24093e+22
[Wed Sep 28 10:28:02 2011] Spectral fit parameter PhoIndex value = 1.69123
[Wed Sep 28 10:28:02 2011] Failed to get F(0.3-8.0) from xmm0414580101/analysis//spectral/fullrun_mos2_xmm0414580101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 10:28:02 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 10:28:02 2011] Using Nh = 8.2e+22, photon index=1.69, rate=1.06, arf fullrun_mos2_xmm0414580101_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 10:28:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 10:28:02 2011] Updating source flux to 3.3e-11