[Fri Feb 17 02:21:48 2012] Detection parameters:
  Position = (313.2, 316.0) = 8 3 35.10 -40 0 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130562.4 +/- 420.4
  Background counts = 51.4
  Rate = 2 +/- 0.007

[Fri Feb 17 02:21:49 2012] Off-axis axis estimate = 1.67'
[Fri Feb 17 02:59:09 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 02:59:09 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Fri Feb 17 02:59:09 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Fri Feb 17 02:59:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Fri Feb 17 06:31:39 2012] fullrun_mos2_xmm0414400101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Feb 17 06:31:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414400101_pi300-10000_cl_pass0_src1.csv
[Fri Feb 17 06:31:39 2012] fullrun_mos2_xmm0414400101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Feb 17 06:31:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414400101_pi300-10000_cl_pass0_src1.csv
[Fri Feb 17 06:31:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414400101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414400101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 06:31:40 2012] fullrun_mos2_xmm0414400101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 17 06:31:40 2012] fullrun_mos2_xmm0414400101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 17 06:31:40 2012] Fit fullrun_mos2_xmm0414400101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 17 06:31:47 2012] Spatial fit model total counts = 115589.000000, observed total counts = 115578.000000
[Fri Feb 17 06:31:47 2012] Offset between fit and detection position for source 1 = 0.151964 pixels
[Fri Feb 17 06:31:47 2012] 115168.800000 total counts/ 21813.200000 bgd. counts: snr = 632.092568
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.151964 pixels
  Position = (313.1, 316.1) = 8 3 35.16 -40 0 11.6
  Extent = 5.6 (5.6-5.6)", rotation angle = 0
  Source counts = 93355.6 +/- 339.4
  Background counts = 21813.2
  Rate = 1 +/- 0.005
[Fri Feb 17 06:31:47 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 06:31:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 06:31:47 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 06:31:47 2012] Source does appear to be extended
[Fri Feb 17 06:31:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 06:43:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 06:43:02 2012] Initial guess for spatial extent in simple fitting = 5.60"
[Fri Feb 17 06:43:02 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.253
[Fri Feb 17 06:43:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.60"
[Fri Feb 17 08:06:49 2012] fullrun_mos2_xmm0414400101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Feb 17 08:06:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414400101_pi300-10000_cl_pass1_src1.csv
[Fri Feb 17 08:06:49 2012] fullrun_mos2_xmm0414400101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Feb 17 08:06:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414400101_pi300-10000_cl_pass1_src1.csv
[Fri Feb 17 08:06:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414400101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414400101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 08:06:49 2012] fullrun_mos2_xmm0414400101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 08:06:49 2012] fullrun_mos2_xmm0414400101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 08:06:49 2012] Fit fullrun_mos2_xmm0414400101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 08:06:51 2012] Spatial fit model total counts = 115604.000000, observed total counts = 115578.000000
[Fri Feb 17 08:06:51 2012] Offset between fit and detection position for source 1 = 0.000118 pixels
[Fri Feb 17 08:06:51 2012] 115181.400000 total counts/ 21838.300000 bgd. counts: snr = 631.644627
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000118 pixels
  Position = (313.1, 316.1) = 8 3 35.16 -40 0 11.6
  Extent = 5.6 (5.6-5.6)", rotation angle = 0
  Source counts = 93343.1 +/- 339.4
  Background counts = 21838.3
  Rate = 1 +/- 0.005
[Fri Feb 17 08:06:51 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 08:06:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 08:06:51 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 08:06:51 2012] Source does appear to be extended
[Fri Feb 17 08:06:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 08:56:20 2012] Counts = 93343.100000, rescaling region sizes by 3.000000
[Fri Feb 17 08:56:20 2012] XMMSAS src. selection expression = ellipse(27189.686500, 27448.612000, 1007.321429, 1007.321429, 0.000000, X, Y)
[Fri Feb 17 08:56:20 2012] Writing source region out to fullrun_mos2_xmm0414400101_pi300-10000_pass1_cl_src1_src.reg
[Fri Feb 17 08:56:20 2012] Extracting stamp from image fullrun_mos2_xmm0414400101_pi300-10000_cl_sm2.00.img.gz, (255, 258) - (371, 374)
[Fri Feb 17 08:56:20 2012] XMMSAS bgd. selection expression = annulus(27189.686500, 27448.612000, 5036.607145, 10073.214290, X, Y) && !ellipse(27893.386749, 26879.462921, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 17 08:56:20 2012] Writing fullrun_mos2_xmm0414400101_pi300-10000_pass1_cl_src1.gif
[Fri Feb 17 08:56:30 2012] Mean detx,y = (-9.65, -50.61) 
[Fri Feb 17 08:56:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 08:58:34 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 08:58:35 2012] Setting source spectrum file to fullrun_mos2_xmm0414400101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 17 08:58:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0414400101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Feb 17 09:03:37 2012] Updating aperture counts using extracted products
[Fri Feb 17 09:03:37 2012] Error reading totcts from fullrun_mos2_xmm0414400101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 17 09:03:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 09:03:37 2012] Using photon index=1.80, rate=1.47, arf fullrun_mos2_xmm0414400101_pi300-10000_pass1_cl_src1.arf
[Fri Feb 17 09:03:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 09:03:37 2012] Updating source flux to 1.8e-11
[Fri Feb 17 09:04:04 2012] Reading fit data from xmm0414400101/analysis//spectral/fullrun_mos2_xmm0414400101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Feb 17 09:04:04 2012] Spectral fit parameter nH value = 4.91319e+21
[Fri Feb 17 09:04:04 2012] Spectral fit parameter PhoIndex value = 5.79302
[Fri Feb 17 09:04:04 2012] Failed to get F(0.3-8.0) from xmm0414400101/analysis//spectral/fullrun_mos2_xmm0414400101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Feb 17 09:04:04 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 09:04:04 2012] Using Nh = 4.9e+21, photon index=5.79, rate=1.47, arf fullrun_mos2_xmm0414400101_pi300-10000_pass1_cl_src1.arf
[Fri Feb 17 09:04:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 09:04:04 2012] Updating source flux to 1.1e-11